South African type MP1 tender

South African type MP1 tender

Type MP1 tender on SAR Class 15A, c. 1930
Type and origin
Locomotive Class 12, Class 12A, Class 12B, Class 14, Class 14A, Class 14B, Class 15, Class 15A, Class 16, Class 16A, Class 16B, Class 16C, Class 20, Class MC1, Class MH, Class MJ
Designer South African Railways
(D.A. Hendrie)
Builder Baldwin Locomotive Works
Beyer, Peacock and Company
Henschel & Son
J.A. Maffei
North British Locomotive Company
Robert Stephenson and Company
Vulcan Foundry
In service 1912-1925
Rebuilder South African Railways
Rebuild date c. 1930
Rebuilt to Type MR, Type XP1
Specifications
Configuration 2-axle bogies
Gauge 3 ft 6 in (1,067 mm) Cape gauge
Length 25 ft 10 38 in (7,884 mm) no. 1494-1519, 1746-1760
25 ft 10 34 in (7,893 mm) all others
Wheel dia. 34 in (864 mm)
Wheelbase 16 ft 9 in (5,105 mm)
  Bogie 4 ft 7 in (1,397 mm)
Axle load 13 LT 15 cwt (13,970 kg)
  Front bogie 27 LT 10 cwt (27,940 kg)
  Rear bogie 23 LT 11 cwt (23,930 kg)
Weight empty 49,452 lb (22,431 kg)
Weight w/o 51 LT 1 cwt (51,870 kg)
Fuel type Coal
Fuel cap. 10 LT (10.2 t)
Water cap. 4,250 imp gal (19,300 l)
Stoking Manual
Couplers Drawbar & Johnston link-and-pin
Drawbar & AAR knuckle (1930s)
Career
Operators South African Railways
Numbers SAR 790-841, 851-852, 1494-1550, 1561-1595, 1634-1648, 1651-1665, 1674-1681, 1701-1760, 1781-1828, 1839-1878, 1901-1921, 1931-1970, 2011-2025, 2080-2100, 2103-2138

The South African type MP1 tender was a steam locomotive tender.

The Type MP1 tender first entered service in 1912, as tenders to the Class 12 4-8-2 Mountain type steam locomotives which were acquired by the South African Railways in that year.[1][2][3]

Manufacturers

Type MP1 tenders were built between 1912 and 1925 by Baldwin Locomotive Works, Beyer, Peacock and Company, Henschel & Son, J.A. Maffei, North British Locomotive Company, Robert Stephenson and Company and Vulcan Foundry.[1]

The South African Railways (SAR) placed 46 Class 12 Mountain type locomotives in service between 1912 and 1921. The locomotive and tender were designed by D.A. Hendrie, who had been appointed as the first Chief Mechanical Engineer of the SAR upon its inception in 1910. The Class 12 was the first locomotive design to originate from the newly established SAR and was acquired to haul coal between Germiston and Witbank. The Type MP1 first entered service as tenders to these locomotives.[1][2][3]

Characteristics

The Type MP1 was the first of a standard tender type which, by fitting an engine drawbar to suit the class of engine to which it is coupled, was eventually to be used on all the Hendrie-designed locomotives. The tender had a coal capacity of 10 long tons (10.2 tonnes), a water capacity of 4,250 imperial gallons (19,300 litres) and a maximum axle load of 13 long tons 15 hundredweight (13,970 kilograms).[1][2][3][4]

Locomotives

Sixteen locomotive classes, built by seven manufacturers, were delivered new with Type MP1 tenders, which were numbered for their engines in the number ranges as shown. An oval number plate, bearing the engine number and often also the tender type, was attached to the rear end of the tender.[1][3]

Number plate on tender no. 805

Classification letters

Since many tender types are interchangeable between different locomotive classes and types, a tender classification system was adopted by the SAR. The first letter of the tender type indicates the classes of engines to which it could be coupled. The "M_" tenders could be used with the locomotive classes as shown, although engine drawbars and intermediate emergency chains had to be replaced or adjusted to suit the target locomotive in some cases.[3]

The second letter indicates the tender's water capacity. The "_P" tenders had a capacity of 4,250 imperial gallons (19,300 litres; 5,100 US gallons).[3]

A number, when added after the letter code, indicates differences between similar tender types, such as function, wheelbase or coal bunker capacity.[3]

Modifications and rebuilding

Modifications

Most of these tenders were modified by shortening and raising the sides of the coal bunker, in effect making the coal at the rear of the bunker more easily accessible to the stoker and apparently without affecting the tender's coal capacity.[3]

Reclassification to Type XP1

At some stage, probably after its engine was withdrawn from service c. 1937, the intermediate draw and buffing gear of Type MP1 tender no. 1634, off a Class MC1 Mallet locomotive, was altered to suit Class 10 4-6-2 Pacific no. 746. This modification converted no. 1634, which was also modified by shortening and raising the sides of the coal bunker, to the sole Type XP1 tender.[3]

Rebuilding to Type MR

During the 1930s, some of the Type MP1 tenders were rebuilt by the SAR by mounting a completely new upper structure on the existing underframe. The modification was done to drawings approved by Chief Mechanical Engineer A.G. Watson in 1929, in respect of Type MP1 tenders of the Classes 12, 12A, 12B, 14, 14A, 14B, 15, 15A, 16, 16A, 16B and 16C. These rebuilt tenders had a more modern appearance, with flush sides all the way to the top of the self-trimming coal bunker. The new tank increased the water capacity from 4,250 to 4,600 imperial gallons (19,300 to 20,900 litres) and these rebuilt tenders were therefore reclassified to Type MR.[2][3][5]

Illustration

References

  1. 1 2 3 4 5 6 Holland, D.F. (1972). Steam Locomotives of the South African Railways, Volume 2: 1910-1955 (1st ed.). Newton Abbott, Devon: David & Charles. pp. 20–21. ISBN 978-0-7153-5427-8.
  2. 1 2 3 4 South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 3'6" Gauge/Spoorwydte. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. p. 44.
  3. 1 2 3 4 5 6 7 8 9 10 11 12 South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 2'0" & 3'6" Gauge/Spoorwydte, Steam Locomotives/Stoomlokomotiewe. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. pp. 6a-7a, 45.
  4. Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. pp. 51–52. ISBN 0869772112.
  5. SAR&H Mechanical Department. Alteration of Tender to Self Trimming Coal Bunker Type - Class 12, 12A, 12B, 14, 14A, 14B, 15, 15A, 16, 16A, 16B, 16C. SAR Mechanical Department Drawing Office, Drawing L-6780/1, 7 April 1929.
This article is issued from Wikipedia - version of the 9/21/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.