South African Class 19C 4-8-2

The South African Railways Class 19C 4-8-2 of 1935 was a steam locomotive.

In 1935, the South African Railways placed fifty Class 19C steam locomotives with a 4-8-2 Mountain type wheel arrangement in service. It was the first South African locomotive class to use Rotary Cam Poppet valve gear, and also the first to be built new with Watson Standard boilers.^[1][2][3][4]

Manufacturer

When the need for more branchline locomotives became apparent in 1934, tenders were invited by the South African Railways (SAR) for another fifty Class 19B locomotives with Walschaerts valve gear, but redesigned by Chief Mechanical Engineer (CME) A.G. Watson with his Watson Standard no. 1A boilers. When the tenders were received, it was found that the North British Locomotive Company (NBL) of Glasgow, Scotland, had also tendered for a locomotive with Rotary Cam Poppet valve gear as an alternative to Walschaerts valve gear.^[1][2][3][5]

Even though this would increase the cost per locomotive by £200, Watson decided to accept this tender, in view of the good reports he had received concerning poppet valve gear. This variation on the design led to these locomotives being designated Class 19C when they were delivered in 1935.^[1][2][3]

Characteristics

Tenders

All fifty Class 19C loco­motives were erected at the Salt River shops and numbered in the range from 2435 to 2484, and many remained stationed at Cape Town while being subjected to exhaustive testing. As built, the Class 19C was delivered with Type MT tenders with a 12 long tons (12.2 tonnes) coal and a 6,000 imperial gallons (27,300 litres) water capacity, even though the axle load of 16 long tons 11 hundredweight (16,820 kilograms) of these tenders exceeded the permissible limits on the branchlines for which the Class 19B was intended. Upon delivery, their new Type MT tenders were exchanged for the smaller modified Type MP1 tenders from some of the reboilered mainline locomotives. The Type MP1 had a lighter axle load of 13 long tons 15 hundredweight (13,970 kilograms) and was therefore more suitable for branchline work. This policy was followed with all the Classes 19B, 19C and 19D, except the last batch of Class 19D which was delivered with Type MX torpedo tenders.^[1][6][7]

Watson Standard boilers

Soon after A.G. Watson was appointment as CME in 1929, he set out on a program of standardisation of locomotive boilers and engine parts, which ultimately led to a considerable reduction in the time taken for locomotive repairs. At the time, 88 different types of locomotive were in service, for which some fifty types of replacement boiler were still being ordered prior to 1929.^[4]

A.G. Watson

The Class 19C was the first to be built new with Watson Standard boilers. The no. 1A boiler had a larger superheater than the Class 19B and, in a break with prior custom, the ash pan and running boards were affixed to the locomotive frame instead of to the boiler to facilitate easier removal of the boiler for repairs. The Class 19C was also built with Watson's altered cab with an inclined front to facilitate access to the firebox stays on the sides ahead of the cab. The Watson cab, like the Watson Standard boiler, was to become standard on later SAR steam locomotive classes.^[2][4][8]

The first five Watson Standard boilers to be designed were the numbers 1, 1A, 2, 2A and 2B. The no. 1 boiler was suitable for the Classes 5, 5B, 10A, 10B and 10C. The no. 1A boiler was similar to the no. 1, but with the boiler barrel lengthened by 2 feet 5 inches (737 millimetres), and was suitable for the Classes 19, 19A and 19B. Like the Class 19C, the Class 19D would also be built new with no. 1A boilers.^[4]

The no. 2 boiler was suitable for the Classes 3, 3B, 4A, 12, 12B, 14, 14A and 14C. The no. 2A boiler was similar to the no. 2, but with the boiler barrel lengthened by 2 feet 4 inches (711 millimetres), and was suitable for the Classes 15, 15A and 15B. The no. 2B boiler was also similar to the no. 2, but with the boiler barrel shortened by 1 foot (305 millimetres), and was suitable for the Classes 16, 16B and 16C.^[4]

These were later followed by the numbers 3A and 3B boilers. The no. 3A boiler was suitable for the Class 16E, while the no. 3B boiler was 3 feet 5 ¹⁄₂ inches (1,054 millimetres) longer and suitable for the Classes 15E, 15F, 21 and 23.^[4]

Copper and steel fireboxes

Some of the locomotives were built with steel fireboxes for use in those areas where good or treated water was readily available, while others were still equipped with copper or composite fireboxes for use in areas with poor water quality.^[6][7]

Copper or composite fireboxes are considerably more expensive to manufacture and repair than steel ones. It was only by the late 1960s, when severe corrosion was no longer a big problem as a result of the availability of water treatment facilities throughout the country, that copper and composite fireboxes were no longer considered necessary.^[9]

Rotary Cam Poppet valve gear

The Rotary Cam Poppet valve gear consists of two admission valves and two exhaust valves per cylinder, operated by a camshaft arranged in a box, fixed to each cylinder between the valve chambers. The cam boxes are self-contained and detachable, and replacement cam boxes can be fitted at running sheds in a few hours. The camshafts are driven from the return cranks on the driving wheels through worm wheels and universal propeller shafts, arranged so that the camshafts and the coupled wheels revolve at the same speeds.^[2]

There were originally eight cams for forward motion and three for reverse, which gave a range of cut-offs from 15% to 85% in forward gear. The hand reversing screw spindle carried a disk, suitably notched with a locking device to ensure that the cam rollers would be in the centre of the selected cams under working conditions. During drifting, the reversing gear is placed in the neutral position, where the exhaust valves are held fully open. These conditions were ideal for drifting and superior to any Walschaerts valve gear in admitting steam to the steam chests, even with cylinders equipped with by-pass valves, snifting valves and drifting valves.^[2]

In service, some trouble was experienced with transmission shaft joints and with worn cams and rollers. If the valves were set with the engine cold, there appeared to be some distortion under working conditions due to the high temperature of superheated steam, which caused deterioration of the valve events. Drivers also reported that, when the engines were standing or moving at very slow speed, it was difficult to reverse, since the cam rollers were not readily able to climb over the inclined surfaces leading from one cam to another. Trouble was also experienced with steam leaking past the tappet spindles into the cam boxes, where it boiled up the oil and caused it to overflow from the cam boxes. This was overcome by serrating the collars of the spindle bushes to allow the steam to escape and prevent entry into the cam boxes.^[2]

Class 19C after a record speed test run

The photograph alongside shows a Class 19C loco­motive after a record speed test run, during which the engine achieved a speed of 67 miles per hour (108 kilometres per hour). A.G. Watson is standing sixth from left in the group in front of the locomotive, with hat in hand.

An official test was conducted in 1938 to compare the steam consumption of the poppet valve Class 19C with the piston valve Class 19D. The Class 19D performed slightly better. However, the valve travel of the Class 19D is 7 ¹⁄₂ inches (191 millimetres), compared to a valve travel of about 4 ³⁄₄ inches (121 millimetres) in all previous engines fitted with piston or slide valves. It was concluded that, had the valve travel of the Class 19D been retained at 4 ³⁄₄ inches (121 millimetres), the test would have shown an advantage for the poppet valves.^[2]

Balancing

The balancing of these locomotives represented another advance on former practices. Until then, locomotives had been balanced to an extent of 50% to 75% of their reciprocating parts, and fully as regards their revolving parts.^[1][2]

On the Class 19C, the proportion of reciprocating parts balanced was reduced to 20%, which resulted in a big decrease of vertical hammer blow to not more than 18 long hundredweight (914 kilograms) on any wheel at 50 miles per hour (80 kilometres per hour). Similar balancing metods on subsequent new locomotives enabled the SAR to adopt axle loads exceeding those permitted on many other railways of the world for comparable weight of rail.^[1][2]

Service

The Class 19C was designed for mainline as well as branchline service. They initially worked in the Witwatersrand area, the Eastern Cape and Western Cape. The Poppet valves made the Class 19C a very free-running locomotive, although it required special maintenance techniques.^[3][8]

As a result, the whole class was allocated to the Western Cape during the Second World War and based at the Paardeneiland shed in Cape Town. From here, they worked on branchlines such as those from Cape Town to Saldanha, along the long branchline via Klawer to Bitterfontein, and across Sir Lowry's Pass to Caledon and Protem in the Overberg.^[3][8]

In later years, around 1970, a few were stationed at Bloemfontein, from where they worked the line to Aliwal North. They were withdrawn from service in 1978.^[3]

One, no. 2439, was preserved, but none of them were sold into industry, firstly because of the special maintenance required for the Poppet valves, and secondly because Cape Town was a long distance away from any potential industrial operators, which would increase the cost of relocation after purchase.^[8]

Illustration

• 
  Class 19C headed towards Bellville from Cape Town, c. 1940
• 
  No. 2439 on the Humefield-Klipplaat line, 1 October 1989
• 
  No. 2439 at Klipplaat, 1 October 1989
• 
  No. 2439 at the Outeniqua Transport Museum, 15 April 2013

References

Wikimedia Commons has media related to South African Class 19C (4-8-2).

Locomotives of South Africa
Steam	7' ¼" gauge East London 0-4-0VB Table Bay 0-4-0ST Table Bay 0-4-0T Table Bay 0-4-0WT 4' 8½" gauge Cape 0-4-0T Blackie Cape 0-4-2 Cape 2-4-0T CGR 0-4-0ST Aid Natal 0-4-0ST Durban Natal 0-4-0WT Natal Natal 4-4-0T Perseverance 3' 6" gauge Tank engines CGR 0-4-0ST 1873 CGR 0-4-0ST 1874 CGR 0-4-0ST 1881 CGR 0-4-0ST 1881 Coffee Pot CGR 0-6-0ST CGR 0-6-0T CGR 2-6-0ST 1900 CGR 2-6-0ST 1902 CGR 1st Class 0-4-0ST 1875 CGR 1st Class 0-4-0ST 1876 CGR 1st Class 2-6-0ST CGR 1st Class 4-4-0T CGR 2nd Class 4-4-0T CGR 3rd Class 2-6-0T CGR Railmotor CSAR Class C CSAR Class E CSAR Rack 4-6-4RT CSAR Railmotor Durban's Congella Durban's Edward Innes Durban's John Milne Durban's Sir Albert Port Elizabeth 0-4-0ST Kowie Railway 0-6-0T Kowie Railway 4-4-0T Metropolitan & Suburban 4-6-2T NGR 2-6-0T Durban & Pietermaritzburg NGR Class I 2-6-2T NGR Class K 0-4-0ST NGR Class K 0-6-0ST NGR Class K 2-6-0T NZASM 10 Tonner NZASM 13 Tonner NZASM 14 Tonner NZASM 18 Tonner NZASM 19 Tonner NZASM 32 Tonner NZASM 40 Tonner PPR 26 Tonner PPR 35 Tonner Portuguese SAR Class A SAR Class B SAR Class C SAR Class C1 SAR Class C2 SAR Class D SAR Class E SAR Class F SAR Class G SAR Class H SAR Class H1 SAR Class H2 SAR Class J SAR Class K SAR Railmotor SAR Dock 0-4-0ST SAR Dock 0-4-0T SWA 2-8-0T 3' 6" gauge Tender engines CGR 1st Class 2-6-0 1876 BP CGR 1st Class 2-6-0 1876 Kitson CGR 1st Class 2-6-0 1879 CGR 1st Class 2-6-0 1891 CGR 1st Class 4-4-0 CGR 1st Class 4-4-0TT CGR 2nd Class 2-6-2TT CGR 3rd Class 4-4-0 1883 CGR 3rd Class 4-4-0 1884 CGR 3rd Class 4-4-0 1889 CGR 3rd Class 4-4-0 1898 CGR 3rd Class 4-4-0 1901 CGR 3rd Class 4-4-0 1903 CGR 4th Class 4-4-2 CGR 4th Class 4-6-0TT 1880 CGR 4th Class 4-6-0TT 1882 CGR 4th Class 4-6-0TT 1882 Joy CGR 4th Class 4-6-0TT 1884 CGR 5th Class 4-6-0 1890 CGR 5th Class 4-6-0 1891 NGR Havelock NGR Class I SAR Class Exp 1 SAR Class Exp 2 SAR Class Exp 3 SAR Class Exp 4 SAR Class Exp 5 SAR Class Exp 6 SAR Class S SAR Class S1 SAR Class S2 SAR Class 1 SAR Class 1A SAR Class 1B SAR Class 2 SAR Class 2C SAR Class 3 SAR Class 3A SAR Class 3B SAR Class 4 SAR Class 4A SAR Class 5 SAR Class 5A SAR Class 5B SAR Class 6 SAR Class 6A SAR Class 6B SAR Class 6C SAR Class 6D SAR Class 6E SAR Class 6F SAR Class 6G SAR Class 6H SAR Class 6J SAR Class 6K SAR Class 6L SAR Class 6Y SAR Class 6Z SAR Class 7 SAR Class 7A SAR Class 7B SAR Class 7C SAR Class 7D SAR Class 7E SAR Class 7F SAR Class 8 SAR Class 8A SAR Class 8B SAR Class 8C SAR Class 8D SAR Class 8E SAR Class 8F SAR Class 8R SAR Class 8X SAR Class 8Y SAR Class 8Z SAR Class 9 SAR Class 10 SAR Class 10A SAR Class 10B SAR Class 10C SAR Class 10D SAR Class 11 SAR Class 12 SAR Class 12A SAR Class 12B SAR Class 13 SAR Class 14 SAR Class 14A SAR Class 14B SAR Class 14C 1st SAR Class 14C 2nd SAR Class 14C 3rd SAR Class 14C 4th SAR Class 15 SAR Class 15A SAR Class 15B SAR Class 15C SAR Class 15CA SAR Class 15E SAR Class 15F SAR Class 16 SAR Class 16A SAR Class 16B SAR Class 16C SAR Class 16D SAR Class 16DA 1928 SAR Class 16DA 1930 SAR Class 16E SAR Class 17 SAR Class 18 SAR Class 19 SAR Class 19A SAR Class 19B SAR Class 19C SAR Class 19D SAR Class 20 SAR Class 21 SAR Class 23 SAR Class 24 SAR Class 25 SAR Class 25NC SAR Class 26 SAR Katanga SWA 2-8-0 3' 6" gauge Articulated engines CGR Fairlie CGR Kitson-Meyer SAR Class FC SAR Class FD SAR Class GA SAR Class GB SAR Class GC SAR Class GCA SAR Class GD SAR Class GDA SAR Class GE SAR Class GEA SAR Class GF SAR Class GG SAR Class GH SAR Class GK SAR Class GL SAR Class GM SAR Class GMA SAR Class GO SAR Class HF SAR Class KM SAR Class MA SAR Class MB SAR Class MC SAR Class MC1 SAR Class MD SAR Class ME SAR Class MF SAR Class MG SAR Class MH SAR Class MJ SAR Class MJ1 SAR Class U 2' 6" gauge Cape Copper John King & Miner Cape Copper Britannia Cape Copper Caledonia Cape Copper Clara Cape Copper Condenser Cape Copper Scotia Namaqua Copper Pioneer Walvis Bay 2-4-2T Hope 2' & 600mm gauges ACR Class NG-G16A CGR NG 0-4-0T CGR NG 0-6-0T CGR NG 4-6-2T CGR Type A 2-6-4T CGR Type C 0-4-0T NGR Class N 4-6-2T SAR Dutton SAR NG 0-4-0T SAR Class NG1 SAR Class NG2 SAR Class NG3 SAR Class NG4 SAR Class NG5 SAR Class NG6 SAR Class NG7 SAR Class NG8 SAR Class NG9 SAR Class NG10 SAR Class NG-G11 SAR Class NG-G12 SAR Class NG-G13 SAR Class NG-G14 SAR Class NG15 SAR Class NG-G16 SWA Class Ha SWA Class Hb SWA Class Hc SWA Class Hd SWA Jung SWA Zwillinge
Electric	Amcoal Class E38 SAR Class ES SAR Class ES1 SAR Class Exp-AC SAR Class 1E SAR Class 2E SAR Class 3E SAR Class 4E SAR Class 5E s1 SAR Class 5E s2 SAR Class 5E s3 SAR Class 5E1 s1 SAR Class 5E1 s2 SAR Class 5E1 s3 SAR Class 5E1 s4 SAR Class 5E1 s5 SAR Class 6E SAR Class 6E1 s1 SAR Class 6E1 s2 SAR Class 6E1 s3 SAR Class 6E1 s4 SAR Class 6E1 s5 SAR Class 6E1 s6 SAR Class 6E1 s7 SAR Class 6E1 s8 SAR Class 6E1 s9 SAR Class 6E1 s10 SAR Class 6E1 s11 SAR Class 7E SAR Class 7E1 SAR Class 7E2 s1 SAR Class 7E2 s2 SAR Class 7E3 s1 SAR Class 7E3 s2 Spoornet Class 7E4 SAR Class 8E SAR Class 9E s1 SAR Class 9E s2 SAR Class 10E SAR Class 10E1 s1 Spoornet Class 10E1 s2 SAR Class 10E2 SAR Class 11E SAR Class 12E Spoornet Class 14E Spoornet Class 14E1 TFR Class 15E Spoornet Class 16E Spoornet Class 17E Spoornet Class 18E s1 TFR Class 18E s2 TFR Class 19E TFR Class 20E TFR Class 21E TFR Class 22E
Gas-electric	SAR Gas-electric
Diesel	3' 6" gauge Diesel-electric PRASA Class Afro 4000 SAR Class DS SAR Class DS1 SAR Class 31-000 SAR Class 32-000 SAR Class 32-200 SAR Class 33-000 SAR Class 33-200 SAR Class 33-400 SAR Class 34-000 SAR Class 34-200 SAR Class 34-400 SAR Class 34-500 SAR Class 34-600 SAR Class 34-800 SAR Class 34-900 SAR Class 35-000 SAR Class 35-200 SAR Class 35-400 SAR Class 35-600 TFR Class 35-800 SAR Class 36-000 SAR Class 36-200 SAR Class 37-000 Spoornet Class 39-000 TFR Class 39-200 TFR Class 43-000 TFR Class 44-000 2' gauge Diesel-electric SAR Class 91-000 3' 6" gauge Diesel-hydraulic SAR Class 61-000 3' 6" gauge Electro-diesel Spoornet Class 38-000
List of South African locomotive classes South African locomotive numbering and classification

South African steam locomotive tenders
Cape gauge	Type CL Type CZ Type ET Type ET1 Type EW Type EW1 Type EW2 Type FT Type GT Type HT Type JT Type JT1 Type JV Type KT Type LP Type MP Type MP1 Type MR Type MS Type MT Type MT1 Type MT2 Type MX Type MY Type MY1 Type SH Type SK Type TJ Type TL Type TM Type WE Type WG Type X-17 Type X-20 Type XC Type XC1 Type XD Type XE Type XE1 Type XF Type XF1 Type XF2 Type XJ Type XM Type XM1 Type XM2 Type XM3 Type XM4 Type XP1 Type XS Type YB Type YC Type YE Type YE1 Type ZA Type ZB Type ZC Type ZE
List of South African locomotive classes South African locomotive history