240 mm Trench Mortar

240 mm Trench Mortar

240 mm Trench Mortar, side view
Type Heavy trench mortar
Place of origin France
Service history
In service 1915 - 1918
Used by France
United States
Italy
Austria-Hungary
Wars World War I
Production history
Designer Dumezil-Batignolles
Designed 1915
Specifications
Weight
  • Total: 866 kg (1,909 lb)
  • Base: 344 kg (758 lb)
  • Barrel & Breech: 317.5 kg (700 lb)
  • Carriage: 204 kg (450 lb)
Barrel length 2 metres (6 ft 7 in)
(including breech)
Crew 7
Shell HE 81.6 kg (180 lb)
(US & France)
Calibre 240 mm (9.45 inch)
Breech vertical sliding block
Elevation 75° to 45°
Traverse 18° left & right
Rate of fire 1 per 6 min
Muzzle velocity 145 m/s (475 ft/s)
(max charge)
Effective firing range 603 - 2,071 m
(660 – 2,265 yd)
Filling amatol or ammonal
Filling weight 40 kg (90 lb)

The 240 mm Trench Mortar, or Mortier de 240 mm, was a large calibre mortar of World War I. An original French design, it was developed by Batignolles Company of Paris and introduced in 1915.

Service

The weapon was dismantled for transport, requiring four carts for the barrel, base, carriage and ammunition.

In action, a heavy timber platform was constructed embedded in the ground, on which the mortar base was immovably secured. The mortar carriage sat on the base and could traverse. The mortar barrel and breech were mounted on the carriage which provided elevation.

They were used in the "siege warfare" on the Western Front to destroy enemy strongpoints, bunkers and similar "hard" targets which were invulnerable to lighter mortars and field guns. The US Army handbook described it : "... the use for which it is primarily adapted is in the bombardment of strongly protected targets—dwellings, covered shelters, command posts, entrances to galleries, etc—or in the destruction of sectors of trenches, salients and the like.".[1] Their effectiveness decreased late in the war as German policy changed to a lightly held frontline, hence decreasing available targets, and they became redundant when the war of movement resumed in mid-1918.

240 mm mortar in French use

The mortar was first introduced in 1915 as the Mortier de 240 mm CT ("court de tranchee"). It was a short barreled version which fired a 192 lb (87 kg) bomb for 1,125 yards (1,030 m), using a propellant charge of 1 lb 9 oz (710 g).[2]

Its first major use was in the Champagne offensive of September 25, 1915.

This was followed later by the Mortier de 240 mm LT ("long de tranchée") which was a long barreled version with improved firing arrangement and breech-loaded charge which fired a 179 lb (81 kg) bomb 2,265 yards (2,071 m), using a propellant charge of 2 lb 13 oz (1.3 kg).[2] This appears to be the bomb configuration adopted by USA.

French estimates were 80 bombs needed to destroy a strong shelter with a roof of concrete or rails and concrete.[3]

240 mm mortar in US use

US gunners loading the mortar

David Lupton's Sons Co manufactured the weapon in the United States during World War I. They were used by nine Trench Mortar Battalions of the Coast Artillery Corps.[4]

The US version appears to have been a direct copy of the Mortier de 240 mm LT, i.e. with longer barrel and propellant charge loaded into the breech via a brass cartridge case, was also produced late in the war but it is doubtful whether any were actually used in combat. The December 1917 manual describes the weapon as "9.45 inch" but makes clear it is the French 240 mm they are describing that the US has adopted. The bomb is described as weighing 180 lb (82 kg), with an explosive charge of 90 lb (41 kg) and range from 660 to 2,500 yards (2,300 m).[1]

The March 1918 manual describes the Bomb, Model 1916, Type T, weight 183 lb (83 kg), explosive 93 lb (42 kg), length 1.02 m (40 in). Barrel and breech weighing 690 lb (310 kg), carriage 448 lb (203 kg), base 764 lb (347 kg), timber platform 5,720 lb (2,590 kg). Propellant charges of 800 grams Ballistite + 15 grams F-3 black powder for 750–1400 meters, and 1250 grams Ballistite + 15 grams F-3 for 1100–2200 meters.[5] This figure agrees with the charge quoted for the mortar in French use for maximum range.

"Separate loading ammunition" was used i.e. the mortar bomb was a separate unit from the propellant cartridge case, which was flanged, brass, 9.776 inches long x 6.67 inches (169 mm) diameter (248.3 by 169.4 mm).[6] The bomb was loaded into the barrel muzzle. The cartridge containing propellant charge appropriate for the required range was loaded into the breech, similar to a howitzer.

The mortar was fired by pulling a lanyard, which triggered a primer in the base of the cartridge case and ignited the propellant charge in the cartridge. The cartridge cases could be reused after cleaning and replacing the primer.

240 mm Mortar in Italian Use

Italian model with long barrel, on the Adamello glacier

Italy used both the French CT and LT versions and produced their own long barrel version.[7]

Austro-Hungarian 24 cm Minenwerfer M.16

Some 400 were copied and manufactured by Böhler during World War I based on examples captured from Italy,[7] although the Austrians had problems recreating the original powder mixture and their shells suffered from large dispersions.[8]

German 24 cm s.Flügelminenwerfer

The US A.E.F. in France reported in March 1918 : "... a new pattern minenwerfer which was brought out in 1916 and looks very much like the French 240... uses a heavy bomb fitted with four vanes like the French 240 mm bombs. This bomb weighs 100 kg (220 lb) and contains 42 kg (93 lb) of explosive... ranges obtained vary from 490 to 1310 yards".[9] The specifications appear similar to the early French 240 mm CT quoted above. It is unknown whether this was related to the French or Austrian Böhler versions.

Notes and references

  1. 1 2 "Handbook of the 9.45-inch trench mortar matériel" United States Ordnance Department. December 1917. page 9
  2. 1 2 Classic Encyclopedia. Trench Ordnance
  3. ↑ General notes on the use of artillery. France. Ministère de la guerre. 1917 Page 43
  4. ↑ Coast Artillery Corps units in France in WWI
  5. ↑ "Manual for trench artillery, United States Army (provisional). Part IV, 240 mm. trench mortar." Prepared at Headquarters AEF France March 1918. page 9-10
  6. ↑ "Handbook of the 9.45-inch (240 mm) trench mortar matériel" December 1917. United States Ordnance Department. page 43
  7. 1 2 Wesley Thomas, 24cm Minenwerfer M. 16. with photographs
  8. ↑ Ortner, M. Christian. The Austro-Hungarian Artillery From 1867 to 1918: Technology, Organization, and Tactics. Vienna, Verlag Militaria, 2007 ISBN 978-3-902526-13-7, p. 480
  9. ↑ "Manual for trench artillery, United States Army (provisional). Part I, Trench Artillery.". Prepared at Headquarters AEF, France, March 1918. page 49-50

See also

Weapons of comparable role, performance and era

Surviving examples

External links

Wikimedia Commons has media related to 240 mm Trench Mortar.
French 240 mm
US 240 mm

The US manuals for the mortar appear to be based on French manuals e.g. the soldiers depicted are in French uniform.

German 240 mm
This article is issued from Wikipedia - version of the 11/16/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.