Ferrari 312 PB

This article is about the sportscar raced from 1971 to 1973. For the earlier 1969 car, see Ferrari 312 P.
Ferrari 312 PB
Category 1971:Group 6 Prototype-Sports Car
1972-73:Group 5 Sports Car
Constructor Scuderia Ferrari
Designer(s) Mauro Forghieri
Technical specifications
Chassis Aluminium central monocoque with steel spaceframe front and rear
Suspension (front) Double wishbone, outboard coil spring/damper
Suspension (rear) Single top-link, reversed lower wishbone, twin radius arms, outboard spring/damper
Engine Ferrari 2,991 cc DOHC flat-12, naturally aspirated, mid-mounted
Transmission Ferrari 5-speed manual
Fuel Shell
Tyres Firestone/Goodyear
Competition history
Notable entrants Scuderia Ferrari
Notable drivers
Debut 1971 1000 km Buenos Aires
Constructors' Championships 1 (1972 WSC)
Ferrari 312 PB at Goodwood Festival of Speed 2010
Problems playing this file? See media help.

The Ferrari 312 PB was a Group 6 Prototype-Sports Car introduced in 1971 by Italian carmaker Ferrari. It was officially designated the 312 P, but often known as the 312 PB to avoid confusion with a previous car of the same name. It was part of the Ferrari P series of Prototype-Sports Cars but was redesignated as a Group 5 Sports Car for 1972.

Development

In 1970, a change in the regulations for sportscar racing for 1972 was announced. The loophole for the big 5-litre sports cars (such as the Porsche 917 and Ferrari 512) was closed, and the minimum weight of the 3-litre prototypes was raised to 650 kg (1,433 lb).

Porsche considered this too heavy as their Porsche 908/03 were 100 kg (220 lb) lighter, and this advantage would have been lost. On the other hand, their air-cooled two-valve engine was low on power with 370 hp (276 kW), and the development of a new engine would have been necessary. Thus, Porsche did not enter world championship sports car races after 1971 and sold the 908s to customers who would have to add weight to them. Matra and Alfa Romeo were willing and able to compete, but only in selected seasons or events. Also, Ford's successful Formula 1 Cosworth-V8 engine was available for independent chassis builders, but vibrations made it unreliable for endurance racing.

After having been beaten by the Porsche 917 in 1970, Ferrari abandoned further development of the Ferrari 512M, leaving the 512 to customer teams like Penske Racing, which had some success with their improved 512M in 1971, though. Penske, probably not very happy about the lack of support from the factory, joined Porsche for their Can-Am effort with the turbocharged Porsche 917/10.

Carlos Pace driving a 312 PB at the Nürburgring in 1973

Instead, in 1971, Ferrari focused on a new 3.0L prototype based on the 180° flat-12 boxer from the 312B F1 car. Officially this design was known as 312P, the motorsports press appending the B to avoid confusion with the earlier 312P V12 cars. This design was similar to the traditional Porsche engine layout with its low center of gravity, but Ferrari used water-cooling and 4-valve heads. The car was promising, but did not win, while the similar Alfa Romeo 33 scored two wins against Porsche's dominance. Whereas the engine bears many similarities in design to the F1 engine, in practice, nearly every part is different and non-interchangeable with the F1 flat 12. This has led to problems for users of these cars in historic racing, as spare parts for these quite fragile engines, are, in comparison to the F1 flat 12 engine, very difficult to obtain.

Racing history

The car first appeared at the 1971 1000 km of Buenos Aires in Argentina at the hands of Italians Ignazio Giunti and Arturo Merzario. Its history started off tragically when Giunti was killed in this race after he hit Jean-Pierre Beltoise's Matra head-on while the Frenchman was pushing the stricken car back to the pits. The car did not win a race that season. In 1972, with only Alfa answering the challenge, the 312 PB was very successful and won all World Sportscar Championship races in which it was entered. Ferrari skipped Le Mans, though, as the F1-based engine had not lasted 24 hours in testing and would surely spoil their otherwise perfect record.

In 1973, Matra which had previously focused on Le Mans also challenged for the championship while Alfa was absent. As Matra won several races, Ferrari needed to enter in the 1973 24 Hours of Le Mans, with an improved yet still doubtful engine. One car was used as a "hare" which supposed to lure the Matras into driving faster laps than they intended, to test their reliability. Ironically it was only the "hare" Ferrari which survived the 24 hours, finishing a respectable second behind a Matra. The championship saw the same order, with only two Italian wins compared to five French. In addition, despite the absence of the Matras, the 312 PB could not defend the 1972 win of the Targa Florio as the prototypes of Ferrari and Alfas failed and a Porsche 911 collected a surprise win.

At the end of the 1973 season, Ferrari abandoned sports car racing to focus on F1 again, as the F1 team had even skipped GP races in 1973 due to lack of competitiveness.

External links

References

This article is issued from Wikipedia - version of the 9/29/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.