F-1 (satellite)
Flight Model of F-1 | |
Mission type |
Education Technology |
---|---|
Operator | FPT/ASTC |
Mission duration | Failed to contact ground |
Spacecraft properties | |
Spacecraft type | 1U CubeSat |
Launch mass | 1 kilogram (2.2 lb) |
Start of mission | |
Launch date | 21 July 2012, 02:06 UTC[1] |
Rocket | H-IIB |
Launch site | Tanegashima Y2 |
Deployed from | ISS |
Orbital parameters | |
Reference system | Geocentric |
Regime | Low Earth |
Inclination | 51.65 degrees |
F-1 is a 1U CubeSat built by FSpace laboratory at FPT University in Vietnam, in partnership with Angstrom Space Technology Center (ASTC), Uppsala University and NanoRacks LLC. Its mission is to train young engineers and students about aerospace engineering and evaluate an advanced 3-axis magnetometer (SDTM) designed in Sweden by ASTC.[2]
F-1 was launched on 21 July 2012 and delivered to International Space Station (ISS) aboard Kounotori 3 along with the Raiko, We Wish, Niwaka and TechEdSat cubesats. Then, on October 4, 2012, it was deployed into orbit from ISS using JEM Small Satellite Orbital Deployer (J-SSOD) which was attached to the Kibo module's robotic arm.[3][4] As of November 2, 2012, F-1 failed to confirm communication after the orbital deployment.[5]
Hardware
- Structure: aluminium alloy T-6061
- Power supply: body-mounted solar cells, rechargeable Li-Polymer battery
- PIC16 and PIC18 micro-controllers
- Yaesu VX-3R handheld transceivers
- C328 low-resolution camera
- Temperature sensors
- 3-axis magnetometer (ASTC)
- 2 meter band Dipole Antenna
- 70cm band Dipole Antenna
Specifications
- Size: 10x10x10cm (1U cubesat)
- Mass: 1 kg
- Communication: 02 independent radios using amateur radio VHF & UHF bands, transmission speed 1200bit/s; AFSK & PWM Morse code modulation, KISS protocol
- Payload: low resolution C328 camera (640×480 maximum resolution, 8 bit color)
- Sensors: temperature sensors and 3-axis magnetometer
- Targeted orbit lifetime: at least 3 months on orbit (depend on release altitude from the ISS)
Communication Subsystem and Packet Format
1. Backup UHF channel (only operational in daylight):
- Frequency: 437.485 MHz
- Modulation: Narrow FM
- Power: about 0.2W RF output
- Antenna: half-wave dipole
- Beacon interval: 20 seconds duration, repeated every 90 seconds
Pulse-Width-Modulation Morse code telemetry beacon
No1 | Data | Description | Size (bits) | Size (chars) |
---|---|---|---|---|
1 | F-1’s callsign | “XV1VN” | 5 | |
2 | OBC1 reset count | Number of OBC1’s reset since the beginning | 8 | |
3 | Temperature 1 | °C (temperature inside F-1, OBC board) | 8 | 5 |
4 | Temperature 2 | °C (temperature outside F-1, Y- side) | 8 | |
5 | Checksum bit | 0 if summary of items #2 to #4 is even, 1 if it is odd | 1 | |
Total | 10 |
2. Main VHF channel (operational during night time but may be turned on in daylight later)
- Frequency: 145.980 MHz
- Modulation scheme: AFSK/FM
- Power: 1.0W RF output
- Antenna: half-wave dipole
- Baud rate: 1200bit/s
- Telemetry and interval: one burst of 3 telemetry packets in KISS format every 30 seconds (interval configurable)
F-1’s KISS packet format
No | Data | Description | Size (bit) |
---|---|---|---|
1 | Date time | Date: dd/mm/y: 5/4/3=12 bits Time: hh/mm/ss: 5/6/6=17 bits | 29 |
2 | Battery voltage | Battery voltage multiplied by 100 (divide by 100 to get actual value) | 11 |
3 | Solar cells voltage | Solar cells voltage multiplied by 10 (divide by 10 to get actual value) | 8 |
4 | Temperature 1 | °C (side 1, Y+) | 8 |
5 | Temperature 2 | °C (side 2, Y-) | 8 |
6 | Temperature 3 | °C (side 3, X-) | 8 |
7 | Temperature 4 | °C (side 4, Z+) | 8 |
8 | Temperature 5 | °C (side 5, Z-) | 8 |
9 | Temperature 6 | °C (side 6, X+) | 8 |
10 | Temperature 7 | °C (inside side 5, Z-) | 8 |
11 | Temperature 8 | °C (inside, under VX-3R1) | 8 |
Total | 112 bits = 14 bytes |
Note:
- F-1 periodically sends a burst of 3 telemetry packets with the same content, to avoid loss of packet
- Time in UTC, 24 hours format
- Year count starting from 2012 (2012 equals 0, 2013 equals 1 and so on…)
- Battery voltage reading is accurate to 0.01V, values are multiplied by 100. Divide by 100 to get actual value.
- Solar cells voltage reading is accurate to 0.1V, values are multiplied by 10. Divide by 10 to get actual value.
- Temperature readings from sensors, will be added with 100 before transmission to ensure a positive number so please subtract 100 to get actual value
- 112 bits, divide to 14 chunks of 8 bits, each chunk becomes one byte
References
- ↑ Bergin, Chris (20 July 2012). "Japanese H-IIB launches HTV-3 to the International Space Station". NASASpaceflight.com. Retrieved 21 July 2012.
- ↑ Gunter Dirk Krebs (July 21, 2012). "F-1". Gunter's Space Page. Retrieved July 26, 2012.
- ↑ 大塚実 (January 25, 2012). "JAXA、宇宙ステーションから超小型衛星を放出できる装置をプレス公開" (in Japanese). mynavi.jp. Retrieved February 1, 2012.
- ↑ 「きぼう」日本実験棟からの小型衛星放出ミッション (in Japanese). JAXA. October 5, 2012. Retrieved December 1, 2012.
- ↑ "Attempt to recover the F-1 Amateur Radio CubeSat". November 3, 2012. Retrieved December 22, 2012.
External links
Wikimedia Commons has media related to F-1 (satellite). |
- Home page
- Facebook page
- Twitter page
- F1: un micro satellite vietnamien dans l'espace fin 2011
- Vietnam Student CubeSat F-1 24/2/2012