Dawn (spacecraft)

Dawn is a space probe launched by NASA in September 2007 with the mission of studying two of the three known protoplanets of the asteroid belt, Vesta and Ceres. It is currently in orbit about its second target, the dwarf planet Ceres. Dawn is the first spacecraft to orbit two extraterrestrial bodies,^[6] the first spacecraft to visit either Vesta or Ceres, and also the first to visit a dwarf planet, arriving at Ceres in March 2015, a few months before New Horizons flew by Pluto in July 2015.

Dawn entered Vesta orbit on July 16, 2011, and completed a 14-month survey mission before leaving for Ceres in late 2012.^[7][8] Dawn entered Ceres orbit on March 6, 2015,^[9][10] and is predicted to remain in orbit perpetually after the conclusion of its mission. NASA considered, but decided against, a proposal to visit a third target.^[11][12]

The Dawn mission is managed by NASA's Jet Propulsion Laboratory, with spacecraft components contributed by European partners from the Netherlands, Italy and Germany. It is the first NASA exploratory mission to use ion propulsion, which enabled it to enter and leave the orbit of multiple celestial bodies. Previous multi-target missions using conventional drives, such as the Voyager program, were restricted to flybys.^[3]

Project history

Technological background

SERT-1: first ion engine NASA spacecraft;^[13] launched on July 20, 1964.^[14]

The first working ion thruster was built by Harold R. Kaufman in 1959 at NASA's Glenn Research Center in Ohio. The thruster was similar to the general design of a gridded electrostatic ion thruster with mercury as its propellant. Suborbital tests of the engine followed during the 1960s, and in 1964 the engine was tested on a suborbital flight aboard the Space Electric Rocket Test 1 (SERT 1). It successfully operated for the planned 31 minutes before falling back to Earth.^[15] This test was followed by an orbital test, SERT-2, in 1970.

Deep Space 1 (DS1), which NASA launched in 1998, demonstrated the long-duration use of a xenon-propelled ion thruster on a science mission,^[16] and validated a number of technologies, including the NSTAR electrostatic ion thruster, as well as performing a flyby of an asteroid and a comet.^[17] In addition to the ion thruster, among the other technologies validated by the DS1 was the Small Deep Space Transponder, which is used on Dawn for long-range communication.^[17]

Discovery Mission Selection

26 proposals were submitted to the Discovery Program solicitation, with budget initially targeted at 300 million USD.^[18] Three semi-finalists were downselected in January 2001 for a phase-A design study: Dawn, Kepler, and INSIDE Jupiter.^[19] In December 2001 NASA selected the Kepler and the Dawn mission for the Discovery program.^[18] Both missions were initially selected for a launch in 2006.^[18]

Cancellation and Reinstatement

The status of the Dawn mission changed several times. The project was cancelled in December 2003,^[20] and then reinstated in February 2004. In October 2005, work on Dawn was placed in "stand down" mode, and in January 2006, the mission was discussed in the press as "indefinitely postponed", even though NASA had made no new announcements regarding its status.^[21] On March 2, 2006, Dawn was again cancelled by NASA.^[22]

The spacecraft's manufacturer, Orbital Sciences Corporation, appealed NASA's decision, offering to build the spacecraft at cost, forgoing any profit in order to gain experience in a new market field. NASA then put the cancellation under review,^[23] and on March 27, 2006, it was announced that the mission would not be cancelled after all.^[24][25] In the last week of September 2006, the Dawn mission's instrument payload integration reached full functionality. Although originally projected to cost US$373 million, cost overruns inflated the final cost of the mission to US$446 million in 2007.^[26] Christopher T. Russell was chosen to lead the Dawn mission team.

Scientific background

Scale comparison of Vesta, Ceres, and Earth's moon

The Dawn mission was designed to study two large bodies in the asteroid belt in order to answer questions about the formation of the Solar System, as well as to test the performance of its ion drive in deep space. Ceres and Vesta were chosen as two contrasting protoplanets, the first one apparently "wet" (i.e. icy and cold) and the other "dry" (i.e. rocky), whose accretion was terminated by the formation of Jupiter. The two bodies provide a bridge in scientific understanding between the formation of rocky planets and the icy bodies of the Solar System, and under what conditions a rocky planet can hold water.^[27]

The International Astronomical Union (IAU) adopted a new definition of planet on August 24, 2006, which introduced the term "dwarf planet" for ellipsoidal worlds that were too small to qualify for planetary status by "clearing their orbital neighborhood" of other orbiting matter. Dawn is the first mission to study a dwarf planet, arriving at Ceres a few months before the arrival of the New Horizons probe at Pluto in July 2015.

Dawn image of Ceres from 13,600 km, May 4, 2015

Ceres comprises a third of the total mass of the asteroid belt. Its spectral characteristics suggest a composition similar to that of a water-rich carbonaceous chondrite.^[28] Vesta, a smaller, water-poor achondritic asteroid comprising a tenth of the mass of the asteroid belt, has experienced significant heating and differentiation. It shows signs of a metallic core, a Mars-like density and lunar-like basaltic flows.^[29]

Available evidence indicates that both bodies formed very early in the history of the Solar System, thereby retaining a record of events and processes from the time of the formation of the terrestrial planets. Radionuclide dating of pieces of meteorites thought to come from Vesta suggests that Vesta differentiated quickly, in three million years or less. Thermal evolution studies suggest that Ceres must have formed some time later, more than three million years after the formation of CAIs (the oldest known objects of Solar System origin).^[29]

Moreover, Vesta appears to be the source of many smaller objects in the Solar System. Most (but not all) V-type near-Earth asteroids, and some outer main-belt asteroids, have spectra similar to Vesta, and are thus known as vestoids. Five percent of the meteoritic samples found on Earth, the howardite–eucrite–diogenite (HED) meteorites, are thought to be the result of a collision or collisions with Vesta.

It is thought that Ceres may have a differentiated interior;^[30] its oblateness appears too small for an undifferentiated body, which indicates that it consists of a rocky core overlain with an icy mantle.^[30] There is a large collection of potential samples from Vesta accessible to scientists, in the form of over 1,400 HED meteorites,^[31] giving insight into Vesta geologic history and structure. Vesta is thought to consist of a metallic iron–nickel core, an overlying rocky olivine mantle and crust.^[32][33][34]

The first color map of Ceres by Dawn (exaggerated color, March 2015)

Objectives

Dawn's approximate flight trajectory

The Dawn mission's goal is to characterize the conditions and processes of the Solar System's earliest eon by investigating in detail two of the largest protoplanets remaining intact since their formation.^[35] The primary question that the mission addresses is the role of size and water in determining the evolution of the planets.^[35] Ceres and Vesta are highly suitable bodies with which to address this question, as they are two of the most massive of the protoplanets. Ceres is geologically very primitive and icy, while Vesta is evolved and rocky. Their contrasting characteristics are thought to have resulted from them forming in two different regions of the early Solar System.^[35]

There are three principal scientific drivers for the mission. First, the Dawn mission can capture the earliest moments in the origin of the Solar System, granting an insight into the conditions under which these objects formed. Second, Dawn determines the nature of the building blocks from which the terrestrial planets formed, improving scientific understanding of this formation. Finally, it contrasts the formation and evolution of two small planets that followed very different evolutionary paths, allowing scientists to determine what factors control that evolution.^[35]

Specifications

Dawn prior to encapsulation at its launch pad on July 1, 2007

Dimensions

With its solar array in the retracted launch position, the Dawn spacecraft is 2.36 meters (7.7 ft) long. With its solar arrays fully extended, Dawn is 19.7 m (65 ft) long.^[36] The solar arrays have a total area of 36.4 m² (392 sq ft).^[37] The main antenna is five feet in diameter.^[6]

Propulsion system

The Dawn spacecraft is propelled by three xenon ion thrusters derived from NSTAR technology used by the Deep Space 1 spacecraft,^[38] and uses only one at a time. They have a specific impulse of 3,100 s and produce a thrust of 90 mN.^[39] The whole spacecraft, including the ion propulsion thrusters, is powered by a 10 kW (at 1 AU) triple-junction gallium arsenide photovoltaic solar array manufactured by Dutch Space.^[40][41] Dawn was allocated 275 kg (606 lb) of xenon for its Vesta approach, and carried another 110 kg (243 lb) to reach Ceres,^[42] out of a total capacity of 425 kg (937 lb) of on-board propellant.^[43] With the propellant it carries, Dawn can perform a velocity change of more than 10 km/s over the course of its mission, far more than any previous spacecraft achieved with onboard propellant after separation from its launch rocket.^[42] Dawn is NASA's first purely exploratory mission to use ion propulsion engines.^[44] The spacecraft also has twelve 0.9 N hydrazine thrusters for attitude control, which are designed to assist in orbital insertion.^[45]

Outreach microchip

Dawn carries a memory chip bearing the names of more than 360,000 space enthusiasts.^[46] The names were submitted online as part of a public outreach effort between September 2005 and November 4, 2006.^[47] The microchip, which is two centimetres in diameter, was installed on May 17, 2007, above the spacecraft's forward ion thruster, underneath its high-gain antenna.^[48] More than one microchip was made, with a back-up copy put on display at the 2007 Open House event at the Jet Propulsion Laboratory in Pasadena, California.

Payload

Framing camera view of the Ceres bright spots

NASA's Jet Propulsion Laboratory provided overall planning and management of the mission, the flight system and scientific payload development, and provided the ion propulsion system. Orbital Sciences Corporation provided the spacecraft, which constituted the company's first interplanetary mission. The Max Planck Institute for Solar System Research and the German Aerospace Center (DLR) provided the framing cameras, the Italian Space Agency provided the mapping spectrometer, and the Los Alamos National Laboratory provided the gamma ray and neutron spectrometer.^[3]

• Framing camera (FC) — The framing camera uses 20 mm aperture, f/7.9 refractive optical system with a focal length of 150 mm.^[49][50] A frame-transfer charge-coupled device (CCD), a Thomson TH7888A,^[50] at the focal plane has 1024 × 1024 sensitive 93-μrad pixels, yielding a 5.5° x 5.5° field of view. An 8-position filter wheel permits panchromatic (clear filter) and spectrally selective imaging (7 narrow band filters). The broadest filter allows imaging at wavelengths ranging from 400 to 1050 nm. In addition, the framing camera will acquire images for optical navigation while in the vicinities of Vesta and Ceres. The FC computer is a custom radiation-hardened Xilinx system with a LEON2 core and 8 GiB of memory.^[50] The camera will offer resolutions of 17 m/pixel for Vesta and 66 m/pixel for Ceres.^[50] Because the framing camera is vital for both science and navigation, the payload has two identical and physically separate cameras (FC1 & FC2) for redundancy, each with its own optics, electronics, and structure.^[3][51]

• Visible and infrared spectrometer (VIR) — This instrument is a modification of the visible and infrared thermal-imaging spectrometer used on the Rosetta and Venus Express spacecraft. It also draws its heritage from the Saturn orbiter Cassini's visible and infrared mapping spectrometer. The spectrometer's VIR spectral frames are 256 (spatial) × 432 (spectral), and the slit length is 64 mrad. The mapping spectrometer incorporates two channels, both fed by a single grating. A CCD yields frames from 0.25 to 1.0 μm, while an array of HgCdTe photodiodes cooled to about 70K spans the spectrum from 0.95 to 5.0 μm.^[3][52]
• Gamma Ray and Neutron Detector (GRaND)^[53] — This instrument is based on similar instruments flown on the Lunar Prospector and Mars Odyssey space missions. This instrument includes 21 sensors with a very wide field of view.^[49] It will be used to measure the abundances of the major rock-forming elements (oxygen, magnesium, aluminium, silicon, calcium, titanium, and iron) on Vesta and Ceres, as well as potassium, thorium, uranium, and water (inferred from hydrogen content).^{[54][55][56][57][58][59]}

A magnetometer and laser altimeter were considered for the mission, but were not ultimately flown.^[60]

Mission summary

Launch preparations

On April 10, 2007, the spacecraft arrived at the Astrotech Space Operations subsidiary of SPACEHAB, Inc. in Titusville, Florida, where it was prepared for launch.^[61][62] The launch was originally scheduled for June 20, but was delayed until June 30 due to delays with part deliveries.^[63] A broken crane at the launch pad, used to raise the solid rocket boosters, further delayed the launch for a week, until July 7; prior to this, on June 15, the second stage was successfully hoisted into position.^[64] A mishap at the Astrotech Space Operations facility, involving slight damage to one of the solar arrays, did not have an effect on the launch date; however, bad weather caused the launch to slip to July 8. Range tracking problems then delayed the launch to July 9, and then July 15. Launch planning was then suspended in order to avoid conflicts with the Phoenix mission to Mars, which was successfully launched on August 4.

Launch

Dawn launching on a Delta II rocket from Cape Canaveral Air Force Station Space Launch Complex 17 on September 27, 2007

The launch of Dawn was rescheduled for September 26, 2007,^[65][66][67] then September 27, due to bad weather delaying fueling of the second stage, the same problem that delayed the July 7 launch attempt. The launch window extended from 07:20–07:49 EDT (11:20–11:49 GMT).^[68] During the final built-in hold at T−4 minutes, a ship entered the exclusion area offshore, the strip of ocean where the rocket boosters were likely to fall after separation. After commanding the ship to leave the area, the launch was required to wait for the end of a collision avoidance window with the International Space Station.^[69] Dawn finally launched from pad 17-B at the Cape Canaveral Air Force Station on a Delta 7925-H rocket^[70] at 07:34 EDT,^[71][72][73] reaching escape velocity with the help of a spin-stabilized solid-fueled third stage.^[74][75] Thereafter, Dawn's ion thrusters took over.

Transit (Earth to Vesta)

After initial testing, during which the ion thrusters accumulated more than 11 days 14 hours of thrust, Dawn began long-term cruise propulsion on December 17, 2007.^[76] On October 31, 2008, Dawn completed its first thrusting phase to send it on to Mars for a gravity assist flyby in February 2009. During this first interplanetary cruise phase, Dawn spent 270 days, or 85% of this phase, using its thrusters. It expended less than 72 kilograms of xenon propellant for a total change in velocity of 1.81 km/s. On November 20, 2008, Dawn performed its first trajectory correction maneuver (TCM1), firing its number 1 thruster for 2 hours, 11 minutes.

Greyscale NIR image of Mars (northwest Tempe Terra), taken by Dawn during its 2009 flyby

Dawn made its closest approach (549 km) to Mars on February 17, 2009 during a successful gravity assist.^[77][78] This flyby slowed Mars' orbital speed by about 2.3 cm over 180 million years.^[6] On this day, the spacecraft placed itself in safe mode, resulting in some data acquisition loss. The spacecraft was reported to be back in full operation two days later, with no impact on the subsequent mission identified. The root cause of the event was reported to be a software programming error.^[79]

To cruise from Earth to its targets, Dawn traveled in an elongated outward spiral trajectory. NASA posts and continually updates the current location and status of Dawn online.^[80] The actual Vesta chronology and estimated Ceres chronology are as follows:^[1]

• September 27, 2007: launch
• February 17, 2009: Mars gravity assist
• July 16, 2011: Vesta arrival and capture
• August 11–31, 2011: Vesta survey orbit
• September 29, 2011 – November 2, 2011: Vesta first high altitude orbit
• December 12, 2011 – May 1, 2012: Vesta low altitude orbit
• June 15, 2012 – July 25, 2012: Vesta second high altitude orbit
• September 5, 2012: Vesta departure
• March 6, 2015: Ceres arrival
• June 30, 2016: End of primary Ceres operations

Vesta approach

As Dawn approached Vesta, the Framing Camera instrument took progressively higher-resolution images, which were published online and at news conferences by NASA and MPI.

• 
  June 14, 2011
  265,000 km (165,000 mi)
• 
  June 24, 2011
  152,000 km (94,000 mi)
• 
  July 1, 2011
  100,000 km (62,000 mi)
• 
  July 9, 2011
  41,000 km (25,000 mi)

On May 3, 2011, Dawn acquired its first targeting image, 1,200,000 km from Vesta, and began its approach phase to the asteroid.^[81] On June 12, Dawn's speed relative to Vesta was slowed in preparation for its orbital insertion 34 days later.^[82][83]

Dawn was scheduled to be inserted into orbit at 05:00 UTC on July 16 after a period of thrusting with its ion engines. Because its antenna was pointed away from the Earth during thrusting, scientists were not able to immediately confirm whether or not Dawn successfully made the maneuver. The spacecraft would then reorient itself, and was scheduled to check in at 06:30 UTC on July 17.^[84] NASA later confirmed that it received telemetry from Dawn indicating that the spacecraft successfully entered orbit around Vesta.^[85] The exact time of insertion could not be confirmed, since it depended on Vesta's mass distribution, which was not precisely known and at that time had only been estimated.^[86]

Vesta orbit

After being captured by Vesta's gravity and entering its orbit on July 16, 2011,^[87] Dawn moved to a lower, closer orbit by running its xenon-ion engine using solar power. On August 2, it paused its spiralling approach to enter a 69-hour survey orbit at an altitude of 2,750 km. It assumed a 12.3-hour high-altitude mapping orbit at 680 km on September 27, and finally entered a 4.3-hour low-altitude mapping orbit at 210 km on December 8.^[88][89][90]

• 
  July 17, 2011
  16,000 km (9,900 mi)
• 
  July 18, 2011
  10,500 km (6,500 mi)
• 
  July 23, 2011
  5,200 km (3,200 mi)
• 
  July 24, 2011
  5,200 km (3,200 mi)

In May 2012, NASA released the preliminary results of Dawn's study of Vesta, including estimates of the size of Vesta's metal-rich core, which is theorized to be 220 km across. NASA scientists furthermore stated that they think that Vesta is the "last of its kind" – the only remaining example of the large planetoids that came together to form the rocky planets during the formation of the Solar System.^[87][91][92] In October 2012, NASA stated that data from Dawn had revealed the origin of anomalous dark spots and streaks on Vesta's surface, which were likely deposited by ancient asteroid impacts.^[93][94][95] In December 2012, it was reported that Dawn had observed gullies on the surface of Vesta that were interpreted to have been eroded by transiently flowing liquid water.^[96][97] More details about the Dawn mission’s scientific discoveries at Vesta are included on the Vesta page.

Dawn was originally scheduled to depart Vesta and begin its two and a half year journey to Ceres on August 26, 2012.^[8] However, a problem with one of the spacecraft's reaction wheels forced Dawn to delay its departure from Vesta's gravity until September 5, 2012.^{[7][98][99][100][101]}

• 
  Central Mound at the South Pole on the asteroid Vesta on August 12, 2011
• 
  The snowman shaped craters on Vesta
• 
  Craters and ridges of Vesta

Geologic map of Vesta based on Dawn data[102]

The most ancient and heavily cratered regions are brown; areas modified by the Veneneia and Rheasilvia impacts are purple (the Saturnalia Fossae Formation, in the north)[103] and light cyan (the Divalia Fossae Formation, equatorial),[102] respectively; the Rheasilvia impact basin interior (in the south) is dark blue, and neighboring areas of Rheasilvia ejecta (including an area within Veneneia) are light purple-blue;[104][105] areas modified by more recent impacts or mass wasting are yellow/orange or green, respectively.

Transit (Vesta to Ceres)

During its time in orbit around Vesta, the probe experienced several failures of its reaction wheels. Investigators planned to modify their activities upon arrival at Ceres for close range geographical survey mapping. The Dawn team stated that they would orient the probe using a "hybrid" mode utilizing both reaction wheels and ion thrusters. Engineers determined that this hybrid mode would conserve fuel. On November 13, 2013, during the transit, in a test preparation, Dawn engineers completed a 27-hour-long series of exercises of said hybrid mode.^[107]

On September 11, 2014, Dawn's ion thruster unexpectedly ceased firing and the probe began operating in a triggered safe mode. To avoid a lapse in propulsion, the mission team hastily exchanged the active ion engine and electrical controller with another. The team stated that they had a plan in place to revive this disabled component later in 2014. The controller in the ion propulsion system may have been damaged by a high-energy particle. Upon exiting the safe mode on September 15, 2014, the probe's ion thruster resumed normal operation.^[108]

Furthermore, the Dawn investigators also found that, after the propulsion issue, Dawn could not aim its main communications antenna towards Earth. Another antenna of weaker capacity was instead temporarily retasked. To correct the problem, the probe's computer was reset and the aiming mechanism of the main antenna was restored.^[108]

Ceres approach

Dawn began photographing an extended disk of Ceres on December 1, 2014,^[109] with images of partial rotations on January 13 and 25, 2015 released as animations. Images taken from Dawn of Ceres after January 26, 2015, exceeded the resolution of comparable images from the Hubble Space Telescope.^[110]

• 
  January 25, 2015
  237,000 km (147,000 mi)
• 
  February 4, 2015
  145,000 km (90,000 mi)
• 
  February 12, 2015
  80,000 km (50,000 mi)
• 
  February 19, 2015
  29,000 km (18,000 mi)

Because of the failure of two reaction wheels, Dawn made fewer camera observations of Ceres during its approach phase than it did during its Vesta approach. Camera observations required turning the spacecraft, which consumed precious hydrazine fuel. Seven optical navigation photo sessions (OpNav 1–7, on January 13 and 25, February 3 and 25, March 1, and April 10 and 15) and two full rotation observation sessions (RC1–2, on February 12 and 19) were planned before full observation begins with orbital capture. The gap in March and early April was due to a period when Ceres appears too close to the Sun from Dawn's vantage point to take pictures safely.^[111]

Ceres orbit

• 
  April 23, 2015; Dawn
  1st Map Orbit - RC3
  13,600 km (8,500 mi)
  (1;2;3;4;5;6;7;8;9;10;11;12;13;14;15;16;17;18;19;20;21;22;23;24) (3D: 1;5;6;7) (animation)
• 
  June 6, 2015: Dawn
  2nd Map Orbit - SRVY
  4,400 km (2,700 mi)
  (1;2;3;4;5;6;7;8;9;10;11;12;13;14;15;16;17;18;19;20;21;22;23;24;25;26;27;28;29;30;31;32;33;34;35;36;37;38;39;40;41;42;43;44;45;46;47;48;49;50;51;52;53;54)
• 
  August 17, 2015: Dawn
  3rd Map Orbit - HAMO
  1,470 km (910 mi)
  (1;2;3;4;5;6;7;8;9;10;11;12;13;14;15;16;17;18;19;20;21;22;23;24;25;26;27;28;29;30;31;32;33;34;35;36;37;38;39;40;41;42;43;44;45;46;47;48;49;50;51;52;53;54;55;56;57;58;59;60;61;62;63;64;65;66;67;68;69;70;71;72;73;74;75;76;77;78;79;80;81;82;83;84;85;86;87;88;89)
• 
  December 10, 2015: Dawn
  4th Map Orbit - LAMOa
  385 km (239 mi)
  (a;b;c;d;e;1;2;3;4;5;6;7;8;9;10;11;12;13;14;15;16;17;18;19;20;21;22;23;24;25;26;27;28;29;30;31;32;33;34;35;36;37;38;39;40;m1;m2;m3;41;42;43;44;45;46;47;48;49;50;51;52;53;54;55;56;57;58;59;60;61;62;63;64;65;66;67;68;69;70;71;72;73;74;75;76;77;78;79;80;81;82;83)
• 
  December 10, 2015: Dawn
  4th Map Orbit - LAMOb
  385 km (239 mi)
  (84;85;86;87;88;89;90;91;92;93;94;95;96;97;98;99;100;101;102;103;104;105;106;107;108;109;110;111;112;113;114;115;116;117;118;119;120;121;122;123;124;125;126;127;128;129;130;131;132;133;134;135;136;137;138;139;140;141;142;143;144;145;146;147;148;149)
• 
  December 10, 2015: Dawn
  4th Map Orbit - LAMOc
  385 km (239 mi)
  (150;151;152;153;154;155;156;157;158;159;160;161;162;163;164;165;166;167;168;169;170;171;172;173;174;175;176;177;178;179;180;181;182;183;184;185;186;187;188;189;190;191;192;193;194;195;196;197;198;199;200;201;202;203;204;205;206;207 – end)

Dawn entered Ceres orbit on March 6, 2015,^[117] four months prior to the arrival of New Horizons at Pluto. Dawn thus became the first mission to study a dwarf planet at close range.^[118][119] Dawn initially entered a polar orbit around Ceres, and continued to refine its orbit. It obtained its first full topographic map of Ceres during this period.^[120]

From April 23 to May 9, 2015, Dawn entered an RC3 orbit ("Rotation Characterization 3") at an altitude of 13,500 km (8,400 mi). The RC3 orbit lasted 15 days, during which Dawn alternated taking pictures and sensor measurements and then relayed the resulting data back to Earth.^[121] On May 9, 2015, Dawn powered its ion engines and began a monthlong spiral descent down to its second mapping point, a Survey orbit, three times closer to Ceres than the previous orbit. The spacecraft stopped twice to take images of Ceres during its spiral descent into the new orbit.

On June 6, 2015, Dawn entered the new Survey orbit at an altitude of 4,430 km (2,750 mi). In the new Survey orbit, Dawn circled Ceres every three Earth days.^[122] The Survey phase lasted 22 days (7 orbits), and was designed to obtain a global view of Ceres with Dawn's framing camera, and generate detailed global maps with the visible and infrared mapping spectrometer (VIR).

On June 30, 2015, Dawn experienced a software glitch when an anomaly in its orientation system occurred. It responded by going into safe mode and sending a signal to engineers, who fixed the error on July 2, 2015. Engineers determined the cause of the anomaly to be related to the mechanical gimbal system associated with one of Dawn's ion engines. After switching to a separate ion engine and conducting tests from July 14 through July 16, 2015, engineers certified the ability to continue the mission.^[123]

On August 17, 2015, Dawn entered the HAMO orbit ("High-Altitude Mapping Orbit").^[124] Dawn descended to an altitude of 1,480 km (920 mi), where in August 2015 it began the two-month HAMO phase. During this phase, Dawn continued to acquire near-global maps with the VIR and framing camera at higher resolution than in the Survey phase. It also imaged in stereo to resolve the surface in 3D.

On October 23, 2015, Dawn began a two-month spiral toward Ceres to achieve a LAMO orbit ("Low-Altitude Mapping Orbit") at a distance of 375 km (233 mi). Since reaching this fourth orbit in December 2015, Dawn was scheduled to acquire data for the next three months with its gamma-ray and neutron detector (GRaND) and other instruments that will determine the chemical elements at the surface.^[115]

Having surpassed its mapping objectives, Dawn climbed to its fifth science orbit of 1,460 km (910 mi) beginning on September 2, 2016, to complete additional observations from a different angle.^[125] Dawn began raising its altitude to its sixth science orbit of 7,200 km (4,500 mi) on November 4, 2016, with a goal of reaching it by December 2016. The return to a higher altitude will allow a second set of data at this altitude, which improves the overall science quality when added to the first batch. However, this time the spacecraft is in new orbit type where it is not spiraling and is instead orbiting in the same direction as Ceres, which reduces fuel and propellant consumption.^[126]

Planned mission conclusion

It is expected that Dawn will become a perpetual satellite of Ceres when the mission is over, due to its highly stable orbit.^[12] A flyby of the asteroid 2 Pallas after the completion of the Ceres mission was suggested but never formally considered; orbiting Pallas would not have been possible for Dawn, due to the high inclination of Pallas' orbit relative to Ceres.^[127]

On April 20, 2016, New Scientist announced that the Dawn team had sent NASA a proposal for an extended mission. According to the report, the spacecraft retains enough xenon propellant to break Ceres orbit and reach a third asteroid.^[128] In July 2016, NASA rejected the proposal because remaining in orbit around Ceres has the potential to provide more significant science discoveries than a flyby of 145 Adeona in May 2019.^[129] The Dawn spacecraft is expected to operate at Ceres until 2017.

Media

Examples of images from Dawn at Ceres

Ceres - Survey Maps (June 2015)

Overall

Kerwan section
(PDF version)

Asari-Zadeni section
(PDF version)

Occator section
(PDF version)

Ceres - polar regions (released November 20, 2015)

Official Nomenclature of Ceres (August 2015)

The Dawn spacecraft's color map of Ceres (September 2016)[130]

Topographic maps of Ceres - east and west hemispheres (July 2015)

• 
  April 14, 2015; Dawn
  22,000 km (14,000 mi)
• 
  May 16, 2015; Dawn
  7,200 km (4,500 mi)
  (1;2;3)
• 
  May 22, 2015; Dawn
  5,100 km (3,200 mi)
  (1;2;3;4;5)
• 
  May 23, 2015; Dawn
  5,100 km (3,200 mi)
  Context view
• 
  May 23, 2015; Dawn
  5,100 km (3,200 mi)
  Close-up view

Flyover video

Ceres flyover animations

Surface features exaggerated
(simulated; 01:15; June 8, 2015)^[131]

Focus on Occator Crater
(false colors; 01:12; December 9, 2015)

Flight over dwarf planet Ceres
(color; 03:43; January 29, 2016)

Selected discoveries by Dawn at Ceres

Bright "Spot 5"
imaged by Dawn
from 385 km (239 mi) LAMO

Bright "Spot 5"
imaged by Dawn
from 1,450 km (900 mi) HAMO

Bright "Spot 5"
in Occator crater
(red=high; blue=low)
(July 28, 2015)^[130]

Ahuna Mons,
a mountain on Ceres
(red=high; blue=low)
(July 28, 2015)

Ahuna Mons,
a mountain on Ceres
5 km (3.1 mi) high
(June 6, 2015)^[132]

See also

Features on Ceres

• Ahuna Mons, a mountain on Ceres
• Bright spots on Ceres
• List of geological features on Ceres

Other asteroid missions

• Chang'e 2 – 4179 Toutatis flyby
• Galileo probe – 951 Gaspra and 243 Ida flybys
• Hayabusa – 25143 Itokawa rendezvous and sample return
• Hayabusa 2 – 162173 Ryugu rendezvous and sample return
• List of asteroids visited by spacecraft
• Near Earth Asteroid Rendezvous (NEAR) – 253 Mathilde flyby, orbited 433 Eros from 2000–2001
• OSIRIS-REx sample return mission
• Rosetta – 2867 Šteins and 21 Lutetia flyby, is orbiting 67P/Churyumov–Gerasimenko

References

External links

Wikimedia Commons has media related to Dawn (spacecraft).

• Dawn website by the Jet Propulsion Laboratory
• Dawn website by NASA
• Dawn public data archives by UCLA

Instruments

• Framing Cameras by the Max Planck Institute for Solar System Research
• Visual and Infrared Spectrometer by the Istituto Nazionale di Astrofisica
• Gamma Ray and Neutron Spectrometer by NASA (journal paper)

Ceres
Geography	General Geology of Ceres Craters Abellio Achita Annona Anura Aristaeus Asari Attis Azacca Begbalel Belun Besua Bonsu Braciaca Centeotl Centeotl Chaminuka Coniraya Consus Cozobi Dada Dantu Darzamat Datan Doliku Duginavi Ernutet Ezinu Fejokoo Fluusa Gaue Geshtin Ghanan Hakumyi Hamori Hatipowa Haulani Heneb Homshuk Ialonus Ikapati Inamahari Insitor Jaja Jarimba Jarovit Juling Kaikara Kait Kerwan Kiriamma Kirnis Kondos Kumitoga Kupalo Laukumate Liber Lociyo Lono Meanderi Megwomets Messor Mondamin Nawish Nepen Ninsar Occator Oltagon Omonga Oxo Piuku Rao Razeka Rongo Roskva Sekhet Shakaema Sintana Tafakula Tahu Takel Tawals Tibong Toharu Tupo Urvara Victa Vinotonus Xochipilli Yalode Zadeni Montes Ahuna Mons Liberalia Mons Ysolo Mons Catenae Baltay Catena Gerber Catena Junina Catenae Pongal Catena Samhain Catenae Uhola Catenae Rupēs Niman Rupes Plana Hanami Planum Tholi Aymuray Tholi Cosecha Tholus Dalien Tholus Hosil Tholus Kwanzaa Tholus Mikeli Tholus Wangala Tholus Planitiae Vendimia Planitia Fossae Nabanna Fossa Sulci Nar Sulcus Other features Bright spots
Astronomy	Classification Asteroid Definition of planet Dwarf planet Planet 2006 definition of planet Discovery Barnaba Oriani Carl Friedrich Gauss Francis Wollaston Franz Xaver von Zach Giuseppe Piazzi Heinrich Olbers Jérôme Lalande Johann Elert Bode Tobias Mayer Possible trojans 2006 SV23 1372 Haremari
Exploration	Dawn mission Ceres Polar Lander
Related	Ceres in fiction Colonization In astrology Solar System bodies formerly considered to be planets

Discovery and New Frontiers program
Discovery	Missions Spacecraft Mars Pathfinder NEAR Shoemaker Lunar Prospector Stardust (NExT) Genesis CONTOUR† MESSENGER Deep Impact (EPOXI) Dawn Kepler GRAIL InSight° Instruments ASPERA-3 Moon Mineralogy Mapper Strofio Proposals Mission 13 DAVINCI Psyche Lucy NEOcam VERITAS Previous Comet Hopper Enceladus Life Finder Mars Geyser Hopper PADME Red Dragon Titan Mare Explorer
New Frontiers	Missions Spacecraft New Horizons Juno OSIRIS-REx Proposals Previous Io Volcano Observer MoonRise New Horizons 2 Saturn Atmospheric Entry Probe VISE
italics indicates active current missions. · † indicates failure en route or before intended mission data returned · ° indicate missions yet to launch.

Spacecraft missions to minor planets
including dwarf planets and asteroids
Orbiters	NEAR Shoemaker Hayabusa Dawn Hayabusa 2 (en route) OSIRIS-REx (en route)
Landers	NEAR Shoemaker MASCOT (en route) MINERVA-II 1A, 1B, 2 (en route)
Flybys	Galileo NEAR Shoemaker Cassini–Huygens Deep Space 1 Stardust/NExT Rosetta/Philae New Horizons Chang'e 2
Failed	Clementine MINERVA PROCYON
Planned	Near-Earth Asteroid Scout (probe, 2018)
Proposed	AIDA (AIM/ DART) Asteroid Redirect Mission Psyche Orbiter
Cancelled	AGORA CRAF Don Quijote Hayabusa Mk2 MAOSEP Marco Polo MarcoPolo-R New Horizons 2 Vesta
Related	Asteroid belt Asteroid capture Asteroid mining Human mission to an asteroid Colonization of asteroids Ceres Colonization Pluto Exploration Vesta Small Solar System bodies Near-Earth object Trans-Neptunian object Colonization Trojan Spacecraft missions to comets List of artificial objects on extra-terrestrial surfaces
Italics indicate active current missions.

2015 in space
Launches	Space probes LISA Pathfinder SMAP Space observatories Astrosat DSCOVR
Impact events	2015 Kerala meteorite 2015 Thailand bolide WT1190F impact
Selected comets	15P/Finlay C/2014 Q2 (Lovejoy) 88P/Howell 22P/Kopff 10P/Tempel C/2013 US10
Selected NEOs	Closest asteroid approaches in 2015 2015 BP513 (357439) 2004 BL86 2015 AZ43 1566 Icarus 2015 TB145 2007 VE191 (33342) 1998 WT24 (85989) 1999 JD6 2015 SO2
Exoplanets	Aldebaran b β Circini b EPIC 2037 b EPIC 2037 c Gliese 1132 b HD 155233 b HD 164595 b HD 219134 b HIP 11915 b KELT-4Ab Kepler-438b Kepler-440b Kepler-442b Kepler-444 Kepler-451b Kepler-452b Kepler-453b K2-3d K2-22b Wolf 1061c
Galaxies	WISE J224607.57-052635.0
Space exploration	Dawn (orbiting Ceres) Rosetta (orbiting Comet Churyumov–Gerasimenko) MESSENGER (end of mission) New Horizons (flyby of Pluto) Akatsuki (orbiting Venus)
Selected discoveries	V774104 (a TNO)
Category:2014 in space — Category:2015 in space — Category:2016 in space

NASA
Policy and history	History NACA (1915) National Aeronautics and Space Act (1958) Space Task Group (1958) Paine (1986) Rogers (1986) Ride (1987) Space Exploration Initiative (1989) Augustine (1990) U.S. National Space Policy (1996) CFUSAI (2002) CAIB (2003) Vision for Space Exploration (2004) Aldridge (2004) Augustine (2009) General Space Race Administrator and Deputy Administrator Chief Scientist Astronaut Corps Budget Spin-off technologies NASA TV NASA Social Launch Services Program Kennedy Space Center Vehicle Assembly Building Launch Complex 39 Launch Control Center Johnson Space Center Mission Control Lunar Sample Laboratory
Robotic programs	Past Hitchhiker Mariner Mariner Mark II MESUR Mars Surveyor '98 New Millennium Lunar Orbiter Pioneer Planetary Observer Ranger Surveyor Viking Project Prometheus Mars Scout Current Living With a Star Lunar Precursor Robotic Program Earth Observing System Great Observatories program Explorer Small explorer Voyager Discovery New Frontiers Mars Exploration Rover
Human spaceflight programs	Past X-15 (suborbital) Mercury Gemini Apollo Apollo–Soyuz Test Project (with USSR) Skylab Shuttle–Mir (with Russia) Space Shuttle program Constellation program Current International Space Station program Commercial Orbital Transportation Services (COTS) Commercial Crew Development (CCDev) Orion
Individual featured missions (human and robotic)	Past COBE Apollo 11 Mercury 3 Mercury-Atlas 6 Magellan Pioneer 10/11 Galileo GALEX GRAIL WMAP Space Shuttle LADEE MESSENGER Aquarius Currently operating MRO Mars Odyssey Dawn New Horizons Kepler International Space Station Hubble Space Telescope Spitzer RHESSI SWIFT THEMIS Mars Exploration Rover Curiosity rover timeline Opportunity rover observed Cassini GOES 14 Lunar Reconnaissance Orbiter GOES 15 Van Allen Probes SDO Juno Mars Science Laboratory timeline NuSTAR Voyager 1/2 WISE MAVEN MMS Future JPSS James Webb Space Telescope WFIRST InSight OSIRIS-REx Asteroid Redirect Mission Mars 2020 NISAR Transiting Exoplanet Survey Satellite Europa Multiple-Flyby Mission
Communications and Navigation	Space Network Near Earth Network Deep Space Network (Goldstone Madrid Canberra Space Flight Operations Facility)
NASA lists	List of astronauts by name by year Apollo astronauts List of NASA aircraft List of NASA missions unmanned missions List of NASA contractors List of United States rockets List of NASA cancellations List of NASA websites List of Space Shuttle missions crews
Category Commons Portal