USS Hart (DD-110)

For other ships with the same name, see USS Hart.
History
United States
Namesake: Ezekiel Hart and John E. Hart
Builder: Union Iron Works, San Francisco, California
Laid down: 8 January 1918
Launched: 4 July 1918
Commissioned: 26 May 1919
Decommissioned: 1 June 1931
Struck: 11 November 1931
Fate: Sold for scrap, 25 February 1932
General characteristics
Class and type: Wickes-class destroyer
Displacement:
  • 1,202–1,208 long tons (1,221–1,227 t) (standard)
  • 1,295–1,322 long tons (1,316–1,343 t) (deep load)
Length: 314 ft 4 in (95.8 m)
Beam: 30 ft 11 in (9.42 m)
Draught: 9 ft 10 in (3.0 m)
Installed power:
Propulsion: 2 shafts, 2 steam turbines
Speed: 35 knots (65 km/h; 40 mph) (design)
Range: 2,500 nautical miles (4,600 km; 2,900 mi) at 20 knots (37 km/h; 23 mph) (design)
Complement: 6 officers, 108 enlisted men
Armament:

USS Hart (DD-110) was a Wickes-class destroyer built for the United States Navy during World War I.

Description

The Wickes class was an improved and faster version of the preceding Caldwell-class. Two different designs were prepared to the same specification that mainly differed in the turbines and boilers used. The ships built to the Bethlehem Steel design, built in the Fore River and Union Iron Works shipyards, mostly used Yarrow boilers that deteriorated badly during service and were mostly scrapped during the 1930s.[1] The ships displaced 1,202–1,208 long tons (1,221–1,227 t) at standard load and 1,295–1,322 long tons (1,316–1,343 t) at deep load. They had an overall length of 314 feet 4 inches (95.8 m), a beam of 30 feet 11 inches (9.4 m) and a draught of 9 feet 10 inches (3.0 m). They had a crew of 6 officers and 108 enlisted men.[2]

Performance differed radically between the ships of the class, often due to poor workmanship. The Wickes class was powered by two steam turbines, each driving one propeller shaft, using steam provided by four water-tube boilers. The turbines were designed to produce a total of 27,000 shaft horsepower (20,000 kW) intended to reach a speed of 35 knots (65 km/h; 40 mph). The ships carried 225 long tons (229 t) of fuel oil which was intended gave them a range of 2,500 nautical miles (4,600 km; 2,900 mi) at 20 knots (37 km/h; 23 mph).[3]

The ships were armed with four 4-inch (102 mm) guns in single mounts and were fitted with two 1-pdr (28 mm) guns for anti-aircraft defense. Their primary weapon, though, was their torpedo battery of a dozen 21-inch (530 mm) torpedo tubes in four triple mounts. In many ships a shortage of 1-pounders caused them to be replaced by 3-inch (76 mm) anti-aircraft (AA) guns.[1] They also carried a pair of depth charge rails. A "Y-gun" depth charge thrower was added to many ships.[4]

Construction and career

Hart, named in honor of Ezekiel Hart and John E. Hart, was launched 4 July 1918; by Union Iron Works of San Francisco, California, sponsored by Mrs. Daniel C. Nutting; and commissioned 26 May 1919, Comdr. Harold Jones in command. Hart joined the destroyer force and operated off the California coast until 17 July 1920, when she was reclassified minelayer, destroyer, DM-8, and proceeded to Mare Island Navy Yard for installation of minelaying equipment. Following her conversion, Hart was assigned to Mine Detachment, Asiatic Fleet, and sailed for the Philippine Islands in November 1920. She subsequently operated in waters off the Philippine Islands and China in peacetime operations.

Ordered to San Diego, California, for deactivation, Hart sailed from Manila, 12 December 1930 and arrived at San Diego 24 January 1931. She decommissioned 1 June 1931, and her name was struck from the Navy List 11 November. Hart was sold for scrap 25 February 1932 in accordance with the London Treaty for the limitation of naval armaments.

Notes

  1. 1 2 Gardiner & Gray, p. 124
  2. ↑ Friedman, pp. 401–03
  3. ↑ Friedman, pp. 39–42, 401–03
  4. ↑ Friedman, p. 45

References

This article is issued from Wikipedia - version of the 10/10/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.