TurkSat-3USat
| Mission type | Communications |
|---|---|
| Operator | Space Systems Design and Test Laboratory, Istanbul Technical University |
| COSPAR ID | 2013-018C[1] |
| SATCAT № | 39152[1] |
| Mission duration | 3 years |
| Spacecraft properties | |
| Manufacturer | Türksat |
| Launch mass | 4 kilograms (8.8 lb) |
| Start of mission | |
| Launch date | April 26, 2013, 04:13:04 UTC |
| Rocket | Chang Zheng 2D |
| Launch site | Jiuquan LA-4/SLS-2 |
| Orbital parameters | |
| Reference system | Geocentric |
| Regime | Sun-synchronous |
| Semi-major axis | 7,019 kilometres (4,361 mi)[1] |
| Perigee | 635.0 kilometres (394.6 mi)[1] |
| Apogee | 661.5 kilometres (411.0 mi)[1] |
| Inclination | 98.1 degrees[1] |
| Period | 97.5 minutes |
TurkSat-3USat is a Turkish communications nanosatellite developed by the Space Systems Design and Test Laboratory and Radio Frequency Electronics Laboratory of Istanbul Technical University (ITU) in collaboration with the Türksat company along with Turkish Amateur Satellite Technology Organization (TAMSAT). It was launched on April 26, 2013.[2][3][4]
Started with a protocol signed on November 29, 2010, TurkSat-3USat is a follow-up project based on the ITUpSAT1 mission, which was launched on September 23, 2009.[4][5][6]
Launch and orbit
TurkSat-3USat was launched as a secondary payload on April 26, 2013 at 04:13:04 UTC atop a Long March 2D satellite launch vehicle from the Launch Area 4/South Launch Site 2 of Jiuquan Satellite Launch Center in Gobi Desert, China.[3][4][5] Further payloads on this flight were:[4][6]
TurkSat-3USat was placed into a Sun-synchronous low Earth orbit at an altitude of 645 km (401 mi). It orbits 2-3 times a day over Turkey. The satellite's mission duration is expected to be at least three years.[3][4]
Spacecraft and payload
TurkSat-3USat is packed in a three-unit CubeSat[7][8] structure made by Innovative Solutions In Space BV (ISIS) from Delft, Netherlands.[4] It is 10 cm × 10 cm (3.9 in × 3.9 in) wide and 34 cm (13 in) long, and has a mass of about 4 kg (8.8 lb).[3][5]
The satellite's payload, a linear transponder and on-board computer, were designed in the RF Electronic Laboratory of ITU.[2] It is Turkey's first indigenously developed satellite. TurkSat-3USat providing SSB/CW communication in amateur radio frequency bands.[3] The transponder input is 145.940-145.990 MHz and the output is 435.200-435.250 MHz. On 437.225 MHz is either a CW beacon or 9,600 baud Audio frequency-shift keying (AFSK).[6][7]
Solar panels and lithium polymer batteries together with super capacitors provide the required power. Passive magnetic attitude control system with hysteresis rods enable satellite stabilization. A C329 UART camera module is available on board for occasional snapshots of Earth.[4][6][7][8]
The satellite features also a system to deorbit itself after the completion of its mission in compliance with the current CubeSat standard and United Nations regulations.[4][6]
References
- 1 2 3 4 5 6 "TURKSAT-3USAT". Real Time Sarellite Tracking. Retrieved 2013-05-24.
- 1 2 "TURKSAT-3USAT Nano Satellite Design". ITU Electronics Laboratory. Retrieved 2013-05-22.
- 1 2 3 4 5 "Türksat-3USat Başarı ile Fırlatıldı Uydudan Sinyal Alındı" (in Turkish). Türksat. Retrieved 2013-05-23.
- 1 2 3 4 5 6 7 8 "TurkSat-3USat". Sharing Earth Observation Resources. Retrieved 2013-05-23.
- 1 2 3 "İTÜ'nün ürettiği 2. küp uydu uzayda". Hürriyet (in Turkish). 2013-04-26. Retrieved 2013-05-24.
- 1 2 3 4 5 Barbosa, Rui C. (2013-04-25). "China back in action with Long March 2D launch of Gaofen-1". NASA Spaceflight. Retrieved 2013-05-24.
- 1 2 3 "TURKSAT-3USAT". Amsat-UK. Retrieved 2013-05-23.
- 1 2 "TURKSAT-3USAT". Amateur Radio – PEØSAT. Retrieved 2013-05-23.