Stolp Acroduster
| Acroduster I SA700 | |
|---|---|
 | |
| Role | Homebuilt aerobatic biplane |
| National origin | United States |
| Manufacturer | Stolp Starduster Corporation |
| Designer | Jim Osborne |
| Unit cost |
$5,500 for a kit in 1975 |
The Acroduster I SA700 is an American single-seat homebuilt aerobatic biplane.
Development
The Acroduster was an elliptical-winged biplane built with the intention of competing against the Pitts Special.
Design
The aircraft also owes some of its design to the Midget Mustang. The fuselage is of aluminum construction rather than the popular tube and fabric for the type. The wings are similar to the Stolp Starduster. Roll rate is 240 degrees per second.[1]
Variants
- Beets Special Marketed by Stolp.
Specifications (Acroduster 1)
Data from Buy planes for sale[2]
General characteristics
- Length: 15.8 ft (4.8 m)
- Wingspan: 19 ft (5.8 m)
- Wing area: 105 sq ft (9.8 m2)
- Empty weight: 740 lb (336 kg)
- Gross weight: 1,190 lb (540 kg)
Performance
- Cruise speed: 143 kn (165 mph; 265 km/h)
- Stall speed: 61 kn (70 mph; 113 km/h)
- Service ceiling: 12,000 ft (3,700 m)
- Rate of climb: 3,000 ft/min (15 m/s)
See also
Notes
- ↑ "Acroduster One pilot report". Airbum.com. Retrieved 2013-11-26.
- ↑ "Stolp Acroduster One SA700 Aircraft For Sale". Buyplanesforsale.com. Retrieved 2013-11-26.
References
 |
Wikimedia Commons has media related to Stolp Acroduster. |
- Budd Davisson, Air Progress, 1975
- Sport Aviation, August 1972 pp. 38 Stolp Arcroduster
- Sport Aerobatics, August 1974 pp. 14 New Unlimited Machine - Acroduster I
This article is issued from Wikipedia - version of the 6/23/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.