Spritsail (square-rigged)

This article is about sails carried on the bowsprit. For fore-and-aft main sails on smaller vessels, see Spritsail.
A replica of the Batavia flying a spritsail (lower right) and a sprit-topsail

On large sailing ships a spritsail is a square-rigged sail carried on a yard below the bowsprit.[1][2]

In some languages (such as German) it is known as a "blind" (German, (eine) Blinde) because it effectively blocks forward vision when set.[3]

Spritsails were commonly used on sailing vessels from the first carracks until about 1800. Until the mid-18th century, most ships also flew a sprit-topsail from the short sprit topmast that rose vertically above the fore end of the bowsprit.

The full-rigged ships of the golden age of sail had no spritsails, as the area under the bowsprit was instead occupied by rigging (martingales and dolphin striker) that reinforced the bowsprit and jib-boom against the forces of an increasing number of jibs.

Notes

Wikimedia Commons has media related to Blinde sails.
  1. ↑ Mastini, Frank (1990). Ship Modeling Simplified: tips and techniques for model building from kits. McGraw-Hill. p. 63. ISBN 0-07-155867-5. Retrieved 2011-01-14.
  2. ↑ Jamieson, Alexander (1829). A Dictionary of Mechanical Science. Vol. II. London: Henry Fisher, Son & Co. p. 956. Retrieved 2011-01-14.
  3. ↑ E. T. Dankwa (1999). "The Development of Square-Rigged Ships". Retrieved 2011-01-14.


This article is issued from Wikipedia - version of the 10/20/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.