rm (Unix)
rm (short for remove) is a basic UNIX command used to remove objects such as files, directories, device nodes, symbolic links, and so on from the filesystem. To be more precise, rm removes references to objects from the filesystem, where those objects might have had multiple references (for example, a file with two different names), and the objects themselves are discarded only when all references have been removed and no programs still have open handles to the objects.
This allows for scenarios where a program can open a file, immediately remove it from the filesystem, and then use it for temporary space, knowing that the file's space will be reclaimed after the program exits, even if it exits by crashing.
rm generally does not destroy file data, since its purpose is really merely to unlink references, and the filesystem space freed may still contain leftover data from the removed file. This can be a security concern in some cases, and hardened versions sometimes provide for wiping out the data as the last link is being cut, and programs such as shred are available which specifically provide data wiping capability.
Example
To remove a file named "foo" from a directory one could type:
% rm foo
Normally, no output is produced by rm, since it typically only generates messages in the event of an error. The -v option can be used to get rm to detail successful removal actions.
Users concerned about removing files unexpectedly - particularly when using wildcards - sometimes use the -i option to cause rm to verify each removal in advance, although this method may be inconvenient for use on large numbers of files.
% rm -i foo
remove foo? y
Context
rm is generally only seen on UNIX-derived operating systems, which typically do not provide for recovery of deleted files through a mechanism like the recycle bin,[1] hence the tendency for users to enclose rm in some kind of wrapper to limit accidental file deletion.
There are undelete utilities that will attempt to reconstruct the index and can bring the file back if the parts were not reused.
Options
Common options that rm accepts include:
- -r, which removes directories, removing the contents recursively beforehand (so as not to leave files without a directory to reside in) ("recursive")
- -i, which asks for every deletion to be confirmed ("interactive")
- -f, which ignores non-existent files and overrides any confirmation prompts ("force"), although it will not remove files from a directory if the directory is write-protected.
rm can be overlain by a C shell alias or Bourne shell function of "rm -i" so as to avoid accidental deletion of files. If a user still wishes to delete a large number of files without confirmation, they can manually cancel out the -i argument by adding the -f option (as the option specified later on the expanded command line "rm -i -f" takes precedence). Unfortunately this approach generates dangerous habits towards the use of wildcarding, leading to its own version of accidental removals.
rm -rf (variously, rm -rf /, rm -rf *, and others) is frequently used in jokes and anecdotes about Unix disasters.[2] The rm -rf variant of the command, if run by a superuser on the root directory, would cause the contents of nearly every writable mounted filesystem on the computer to be deleted, up to the point the system itself crashes from missing some crucial file, directory, or the like.
rm is often used in conjunction with xargs to supply a list of files to delete:
xargs rm < filelist
Or, to remove all PNG images in all directories below the current one:
find . -name '*.png' -exec rm {} +
Permissions
Usually, on most filesystems, deleting a file requires write permission on the parent directory (and execute permission, in order to enter the directory in the first place). (Note that, confusingly for beginners, permissions on the file itself are irrelevant. However, GNU rm asks for confirmation if a write-protected file is to be deleted, unless the -f option is used.)
To delete a directory (with rm -r
), one must delete all of its contents recursively. This requires that one must have read and write and execute permission to that directory (if it's not empty) and all non-empty subdirectories recursively (if there are any). The read permissions are needed to list the contents of the directory in order to delete them. This sometimes leads to an odd situation where a non-empty directory cannot be deleted because one doesn't have write permission to it and so cannot delete its contents; but if the same directory were empty, one would be able to delete it.
If a file resides in a directory with the sticky bit set, then deleting the file requires one to be the owner of the file.
Protection of the filesystem root
Sun Microsystems introduced "rm -rf /
" protection in Solaris 10, first released in 2005. Upon executing the command, the system now reports that the removal of / is not allowed.[3] Shortly after, the same functionality was introduced into FreeBSD version of rm
utility.[4] GNU rm
refuses to execute rm -rf /
if the --preserve-root
option is given,[5] which has been the default since version 6.4 of GNU Core Utilities was released in 2006.
User-proofing
Systems administrators, designers, and even users often attempt to defend themselves against accidentally deleting files by creating an alias or function along the lines of:
alias rm="rm -i"
rm () { /bin/rm -i "$@" ; }
This results in rm
asking the user to confirm on a file-by-file basis whether it should be deleted, by pressing the Y or N key. Unfortunately, this tends to train users to be careless about the wildcards they hand into their rm commands, as well as encouraging a tendency to alternately pound y and the return key to affirm removes - until just past the one file they needed to keep. Users have even been seen going as far as "yes | rm files
", which automatically inserts "yes" for each file.
A compromise that allows users to confirm just once, encourages proper wildcarding, and makes verification of the list easier can be achieved with something like:
if [ -n "$PS1" ] ; then
rm ()
{
ls -FCsd "$@"
echo 'remove[ny]? ' | tr -d '\012' ; read
if [ "_$REPLY" = "_y" ]; then
/bin/rm -rf "$@"
else
echo '(cancelled)'
fi
}
fi
It's important to note that this function should not be made into a shell script, which would run a risk of it being found ahead of the system rm in the search path, nor should it be allowed in non-interactive shells where it could break batch jobs. Enclosing the definition in the if [ -n "$PS1" ] ; then .... ; fi
construct protects against the latter.
There exist third-party alternatives which prevent accidental deletion of important files, such as "safe-rm"[6] or "trash".[7]
History
On some old versions of Unix, the rm command would delete directories if they were empty.[8] This behaviour can still be obtained in some versions of rm with the -d
flag, e.g., the BSDs (such as FreeBSD,[9] NetBSD,[10] OpenBSD[11] and OSX[12]) derived from 4.4BSD-Lite2.[13] The GNU coreutils version also provides this option, to help with compatibility.[14] The same functionality is provided by the standard rmdir command.
The -i
option in Version 7 replaced dsw
, or "delete from switches", which debuted in Version 1. Doug McIlroy wrote that dsw
"was a desperation tool designed to clean up files with unutterable names".[15]
See also
- srm (Unix): secure remove file in Unix
- unlink(): the underlying system call called by this user space program for its main functionality
- del (command)
- deltree
References
- ↑ http://www.faqs.org/faqs/unix-faq/faq/part3/section-6.html
- ↑ Gite, Vivek. "Linux/UNIX: Delete a file". Nixcraft. Retrieved 24 November 2011.
- ↑ Meddling in the Affairs of Wizards
- ↑ FreeBSD rm.c commit message
- ↑ rm invocation - GNU Coreutils
- ↑ https://launchpad.net/safe-rm
- ↑ https://github.com/andreafrancia/trash-cli
- ↑ Unix 8th ed. rm man page
- ↑ "RM(1)", FreeBSD-5.4-RELEASE, retrieved February 5, 2015
- ↑ "RM(1)", NetBSD-2.0, retrieved February 5, 2015
- ↑ "RM(1)", OpenBSD-3.6, retrieved February 5, 2015
- ↑ "RM(1)", Darwin-7.0.1-ppc, retrieved February 5, 2015
- ↑ "RM(1)", 4.4BSD-Lite2, retrieved February 5, 2015
- ↑ Krzysztof Goj (January 22, 2012). "rm: new option --dir (-d) to remove empty directories". coreutils.git.
- ↑ McIlroy, M. D. (1987). A Research Unix reader: annotated excerpts from the Programmer's Manual, 1971–1986 (PDF) (Technical report). CSTR. Bell Labs. 139.
External links
![]() |
The Wikibook Guide to Unix has a page on the topic of: rm |
- : remove directory entries – Commands & Utilities Reference, The Single UNIX® Specification, Issue 7 from The Open Group