Pyewipe Depot electric railway station

Pyewipe Depot
Location
Place Great Coates
Area North East Lincolnshire
Coordinates 53°34′49″N 0°06′32″W / 53.5803°N 0.1089°W / 53.5803; -0.1089Coordinates: 53°34′49″N 0°06′32″W / 53.5803°N 0.1089°W / 53.5803; -0.1089
Grid reference TA246111
Operations
Original company Great Central Railway
Pre-grouping Great Central Railway
Post-grouping London and North Eastern Railway
Platforms 0
History
15 May 1912 Opened as "No. 2 Passing Place"
by 1917 renamed Pyewipe Depot
3 July 1961 closed[1]
Disused railway stations in the United Kingdom
Closed railway stations in Britain
A B C D–F G H–J K–L M–O P–R S T–V W–Z
UK Railways portal

Pyewipe Depot electric railway station was situated at the second of eight passing loops on the otherwise single track central "country" section[2] of the inter-urban[3] Grimsby and Immingham Electric Railway when travelling from Corporation Bridge, Grimsby to Immingham Dock.

Overview

The electric railway was built primarily to carry workers between Grimsby and Immingham Dock which the Great Central Railway had built on a greenfield site in a sparsely populated area. The line was built by the Great Central and remained in railway ownership up to closure in 1961. It therefore appeared in railway timetables[4] and it was possible to buy through tickets between any of the stops on the line and anywhere on the national railway network,[5] though there never was any physical connection with any conventional track, nor with the tramways in Grimsby and Cleethorpes.

In modern parlance the vehicles would be described as trams, but they were usually referred to locally and in publications such as timetables as "cars" or "tramcars", with related things being called names such as "tramcar halt" and "tramcar bridge." "Car" was a far more common short form than "tram."[4]

Location and facilities

The middle section of the line passed through thinly populated marshy farmland.[6] The line was single track with passing places ("loops" in railway parlance) every half mile. The points at the ends of the loops were spring loaded as the line was unsignalled, motormen drove by line of sight. All eight passing loops served as halts, with passengers alighting onto cinders beside the tracks. For the benefit of the few who took advantage of these facilities in the early years each passing loop carried its number on a metal plate. Initially the halts were known as No. 1 Passing Place, No. 2 Passing Place etc. Some were named informally at first, but these names stuck and had become official by 1915.[7] No. 2 Passing Place became known as Pyewipe Depot halt because it was near the line's maintenance and storage depot, known as Pyewipe car sheds. The halt did not appear on public timetables, nor is it mentioned on the map of the line which is widely accepted as definitive,[8] though the loop is shown on a map by Kent.[9] The likeliest reason is that, apart from people with business at the depot, such as crew clocking on or maintenance workers ending their shifts, the halt would serve almost no-one for work, leisure or residence.

No platforms ever existed at any of the stopping places; passengers were expected to board and alight from the roadway or trackside cinders according to the location. The "stations" were much more commonly referred to as "halts" or "stopping places."

Passengers bought their tickets from conductors on board the cars. Pyewipe Depot Halt was a Request Stop, people hailed a car by giving a clear signal to the motorman or conductor as appropriate.

The lines from the station

Tramcars arrived from both directions along conventional rails on a reserved way running parallel to the conventional Grimsby District Light Railway,[10] though there was no physical connection between the two.[11] Grooved tram tracks were used on the street section in Grimsby and around Immingham Town.

Loops 3, 4, 6 and 7 were removed in 1917, the materials being contributed to the war effort, this did not affect Pyewipe Depot Halt.

Services

Unusually among British tramways services ran round the clock, particularly to provide for railway workers based at Immingham engine shed, whose duties often involved starting or finishing at unsocial hours. Traffic was highly peaked, with convoys of tramcars leaving and arriving to match shift changes at the dock. It was normal for several tramcars to queue to enter and leave Pyewipe Depot halt at the peaks.

The east coast floods of 1953 did considerable damage to the tramway's infrastructure, with passengers having to walk between tramcars marooned either side of flooded or washed out sections.[12]

In 1956 over a million passengers used the line[13] and even with deliberate rundown a quarter of a million used it in its last twelve months up to closure in July 1961.[14]

Closure

The line took some years to die. It was cut back at the Grimsby end in 1956. In 1959 it was reduced to peak services only, it disappeared from Bradshaw and through ticketing beyond the line was withdrawn.[15] Formal closure of the line came on Monday 3 July 1961, with the last tramcars running on Saturday 1 July 1961, when a convoy of six tramcars set off from Immingham Dock, nominally at 14:03.[16] The last tramcar of this convoy and therefore the last through Pyewipe Depot Halt, was Number 4.[17]

Aftermath

The first track on the line to be removed was at Immingham Dock tramcar station, to give increased parking space. The process of demolition was piecemeal and even in 2013 many hints of the line remained, such as spun concrete masts near Immingham Town.

Former Services
Preceding station Disused railways Following station
Great Coates LC
Line and station closed		   Great Central Railway
Grimsby and Immingham Electric Railway		   Cleveland Bridge
Line and station closed

References

Sources

Further material

This article is issued from Wikipedia - version of the 9/23/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.