Newichawannock Canal

Great Falls Company Newichawannock Canal Historic District
Location Wakefield, New Hampshire and Acton, Maine
Coordinates 43°34′10″N 70°58′16″W / 43.56944°N 70.97111°W / 43.56944; -70.97111Coordinates: 43°34′10″N 70°58′16″W / 43.56944°N 70.97111°W / 43.56944; -70.97111
Built c. 1850
NRHP Reference #

14000460

[1]
Added to NRHP August 6, 2014

The Newichawannock Canal is a man-made canal which drains Great East Lake into Horn Pond at the border between Wakefield, New Hampshire, and Acton, Maine, in the northeastern United States. Begun in 1850 by the Great Falls Company to increase the water available for its mills in Somersworth, New Hampshire,[2][3] the 0.75-mile (1.21 km) canal is unusual as it was built for strictly industrial purposes in an area remote from the actual industrial site. The canal forms the boundary between the states of New Hampshire and Maine, and is spanned by a stone bridge built at the same time.[3] The canal and bridge, along with related artifacts, were listed on the National Register of Historic Places in 2014.[4]

Description and history

The Newichawannock Canal is located between Great East Lake to the north and Horn Pond to the south, on the southern portion of the north-south border between Maine and New Hampshire. The canal is 13 feet (4.0 m) wide and about 16 feet (4.9 m) deep, and is lined with unmortared stone. An unmortared stone-arch bridge, built at the same time, carries Canal Road over the waterway.[3] Also located in the area are piles of stone, apparently left over from the canal construction, and a second canal that lies submerged in Great East Lake.[5] Horn Pond is the source of the Salmon Falls River, a tributary of the Piscataqua River, both of which form the New Hampshire-Maine border south of the pond.

The bridge over the canal

The Great Falls Company was founded in 1823 to operate textile mills using the water power of the Salmon Falls River at Somersworth, New Hampshire. By about 1860 the mill complex there had grown to include six large buildings and employed 1,500 workers.[6] In order to increase water flow at the mills, the company purchased water rights at Great East Lake and Horn Pond, and began construction of the canal in the 1850s. It was not completed until the 1860s due in part to the American Civil War. The canal forms the boundary between the states of New Hampshire and Maine.[3] The canal was built by Hiram Paul, a civil engineer who lived in Wakefield and operated a tavern.[2]

See also

Wikimedia Commons has media related to Newichawannock Canal.

References

  1. ↑ National Park Service (2008-04-15). "National Register Information System". National Register of Historic Places. National Park Service.
  2. 1 2 "Historic Districts". Wakefield Heritage Commission. Retrieved 2015-06-24.
  3. 1 2 3 4 "Canal, bridge could make the National Register". Fosters.com. Retrieved 2014-08-23.
  4. ↑ "Weekly Actions, 8/04/14 through 8/08/14". National Park Service. Retrieved 2014-08-23.
  5. ↑ "Historic NH-Maine canal named to National Register of Historic Places". New Hampshire Division of Cultural Resources. Retrieved 2015-10-24.
  6. ↑ Garner, John S. (ed) (1992). The Company Town: Architecture and Society in the Early Industrial Age. Oxford University Press USA. p. 117. ISBN 9780195361414.
This article is issued from Wikipedia - version of the 11/30/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.