Miles Glacier Bridge

"Million Dollar Bridge" redirects here. For the bridge in Portland, Maine, see Million Dollar Bridge (Maine).
Miles Glacier Bridge

Miles Glacier Bridge in 2008. The far left span as seen in this photo shows the repairs performed in 2004.
Carries road bridge[1]
Crosses Copper River[1]
Locale Cordova, Alaska[1]
Characteristics
Design through Pennsylvania (Petit) truss bridge
Material steel and concrete[2]
Total length 1,550 feet (470 m)[2]
Number of spans 4[2]
Piers in water 3[2]
History
Construction begin 1909[1]
Construction end

1910[1]

Million Dollar Bridge

Damage done by the earthquake, with the temporary fixes performed to make the bridge usable
Location Valdez-Cordova Census Area, Alaska
Coordinates 60°40′24″N 144°44′36″W / 60.67333°N 144.74333°W / 60.67333; -144.74333Coordinates: 60°40′24″N 144°44′36″W / 60.67333°N 144.74333°W / 60.67333; -144.74333
Built 1910
Architect Katalla Corp.; et al.
Architectural style Other
NRHP Reference #

00000293

[3]
Added to NRHP March 31, 2000

The Miles Glacier Bridge, also known as the Million Dollar Bridge, was built in the early 1900s, across the Copper River fifty miles from Cordova in what is now the U.S. state of Alaska. It is a multiple-span Pennsylvania truss bridge which completed a 196-mile (315 km) railroad line for the Copper River and Northwestern Railway, built by J. P. Morgan and the Guggenheim family to haul copper from the old mining town of Kennicott, now located within the Wrangell–St. Elias National Park and Preserve, to the port of Cordova. It earned its nickname because of its $1.4 million cost, well recouped by the about $200 million worth of copper ore which was shipped as a result of its construction.[4]:175

Current access to the bridge is limited to jet boat travel up the Copper River or boat travel downriver from Chitina due to the erosion along the Copper River Highway.[5]

History

The Copper River and Northwestern Railway and associated bridges were built between 1906 and 1911 by Michael James Heney. This bridge was the most significant of the group. However, its use as a railroad bridge ended in 1938 when the Copper River and Northwestern Railway shut down.[4]

Work to convert the old rail bed into a highway bridge was completed in 1958. Bridges along the Copper River Highway from Cordova to Chitina were destroyed in the 1964 Alaska earthquake, but the Million Dollar Bridge was "merely damaged". One of the bridge spans, #4, slipped off its foundation after the earthquake.[4]

In 1958, a plaque was placed on the bridge:[4]

This Bridge once served the Copper River and Northwestern Railroad trains, and was converted to a Highway Bridge in 1958. The Bridge crosses the Copper River between two scenic and active glaciers. The Childs Glacier to the west and the Miles Glacier to the east. Known as the Million Dollar Bridge, and constructed during severe winter conditions. It was considered one of the great engineering feats of all time.

The bridge was placed on the National Register of Historic Places in 2000.[6]

Features

The bridge at Mile 49 needed to span 1,500 feet of the Copper River between two glaciers on either bank. Ice calving from the Miles Glacier meant the bridge needed to withstand icebergs, up to 20 feet in height, moving with the 7.2 miles per hour current. Additionally, the river ranged 24 feet in height. The bed of the river was loose sand and gravel to a depth of 20 feet.[4]

The site was selected in 1907 and the bridge would have four spans, #1 at 400 feet, #2 at 300 feet, #3 at 450 feet and #4 at 400 feet, mounted on three piers. The piers would be placed on bars out of the way of most ice. Piers #1 and #2 required detached icebeakers. Excavation of the piers and icebreakers was accomplished through the use of caissons. The track reached the bridge site in Oct. 1908. Actual bridge construction started on 5 April 1909 with span #1 completed in 10.5 days, span #2 in 6 days, span #3 in 10 days and span #4 was completed a month later. The bridge was in full service by July 1910.[4]

Repairs

Temporary repairs, consisting of a rudimentary system of cables, I-beams, and planks, kept the bridge passable after the 1964 earthquake. The bridge was permanently repaired starting in 2004, and the repaired bridge was dedicated in August 2005. The controversial decision was made to repair it after a severe September 1995 flood caused the bridge to be impassable and also made an eventual washout of debris onto Childs Glacier inevitable. State engineers determined that it was less expensive to repair the bridge than it would be to remove it, or (in a worst-case scenario) clean up if the bridge completely collapsed into the river. Such a cleanup would have been required due to the Copper River salmon runs. The repairs cost $16 million in federal and $3 million in state tax dollars.[7]

See also

References

  1. 1 2 3 4 5 Million Dollar Bridge at Structurae
  2. 1 2 3 4 "Copper River & Northwest Railroad, Million Dollar Bridge". Washington, DC: Historic American Buildings Survey/Historic American Engineering Record, National Park Service, Department of the Interior. 1986-07-23. p. 2. Retrieved 2009-06-13.
  3. ↑ National Park Service (2007-01-23). "National Register Information System". National Register of Historic Places. National Park Service.
  4. 1 2 3 4 5 6 Alfredo O. Quinn (1995). Iron Rails to Alaskan Copper. D'Aloguin Publishing Co. p. 91,117–130,183–189.
  5. ↑ http://www.thecordovatimes.com/article/1330day-trip-to-childs-glacier-and-million-dollar
  6. ↑ "National Register of Historic Places Listings April 7, 2000". Cr.nps.gov. 2000-04-07. Retrieved 2011-08-28.
  7. ↑ Gay, Joel (2004-01-05). "Million Dollar Bridge on pace to be repaired by spring 2005". Anchorage Daily News. Archived from the original on 2008-09-12.

Media related to Miles Glacier Bridge at Wikimedia Commons

This article is issued from Wikipedia - version of the 11/25/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.