Method of steepest descent

For the optimization algorithm, see Gradient descent.

In mathematics, the method of steepest descent or stationary phase method or saddle-point method is an extension of Laplace's method for approximating an integral, where one deforms a contour integral in the complex plane to pass near a stationary point (saddle point), in roughly the direction of steepest descent or stationary phase. The saddle-point approximation is used with integrals in the complex plane, whereas Laplace’s method is used with real integrals.

The integral to be estimated is often of the form

where C is a contour and λ is large. One version of the method of steepest descent deforms the contour of integration so that it passes through a zero of the derivative g′(z) in such a way that on the contour g is (approximately) real and has a maximum at the zero.

The method of steepest descent was first published by Debye (1909), who used it to estimate Bessel functions and pointed out that it occurred in the unpublished note Riemann (1863) about hypergeometric functions. The contour of steepest descent has a minimax property, see Fedoryuk (2001). Siegel (1932) described some other unpublished notes of Riemann, where he used this method to derive the Riemann-Siegel formula.

A simple estimate[1]

Let f, S : CnC and CCn. If

where denotes the real part, and there exists a positive real number λ0 such that

then the following estimate holds:

The case of a single non-degenerate saddle point

Basic notions and notation

Let x be a complex n-dimensional vector, and

denote the Hessian matrix for a function S(x). If

is a vector function, then its Jacobian matrix is defined as

A non-degenerate saddle point, z0Cn, of a holomorphic function S(z) is a point where the function reaches an extremum (i.e., S(z0) = 0) and has a non-vanishing determinant of the Hessian (i.e., ).

The following is the main tool for constructing the asymptotics of integrals in the case of a non-degenerate saddle point:

Complex Morse Lemma

The Morse lemma for real-valued functions generalizes as follows[2] for holomorphic functions: near a non-degenerate saddle point z0 of a holomorphic function S(z), there exist coordinates in terms of which S(z) − S(z0) is exactly quadratic. To make this precise, let S be a holomorphic function with domain WCn, and let z0 in W be a non-degenerate saddle point of S, that is, S(z0) = 0 and . Then there exist neighborhoods UW of z0 and VCn of w = 0, and a bijective holomorphic function φ : VU with φ(0) = z0 such that

Here, the μj are the eigenvalues of the matrix .

An illustration of Complex Morse Lemma

The asymptotic expansion in the case of a single non-degenerate saddle point

Assume

  1. f(z) and S(z) are holomorphic functions in an open, bounded, and simply connected set ΩxCn such that the Ix = ΩxRn is connected;
  2. has a single maximum: for exactly one point x0Ix;
  3. x0 is a non-degenerate saddle point (i.e., S(x0) = 0 and ).

Then, the following asymptotic holds

(8)

where μj are eigenvalues of the Hessian and are defined with arguments

(9)

This statement is a special case of more general results presented in Fedoryuk (1987).[4]

Equation (8) can also be written as

(13)

where the branch of

is selected as follows

Consider important special cases:

where denotes the signature of matrix , which equals to the number of negative eigenvalues minus the number of positive ones. It is noteworthy that in applications of the stationary phase method to the multidimensional WKB approximation in quantum mechanics (as well as in optics), Ind is related to the Maslov index see, e.g., Chaichian & Demichev (2001) and Schulman (2005).

The case of multiple non-degenerate saddle points

If the function S(x) has multiple isolated non-degenerate saddle points, i.e.,

where

is an open cover of Ωx, then the calculation of the integral asymptotic is reduced to the case of a singe saddle point by employing the partition of unity. The partition of unity allows us to construct a set of continuous functions ρk(x) : Ωx → [0, 1], 1 ≤ kK, such that

Whence,

Therefore as λ → ∞ we have:

where equation (13) was utilized at the last stage, and the pre-exponential function f(x) at least must be continuous.

The other cases

When S(z0) = 0 and , the point z0Cn is called a degenerate saddle point of a function S(z).

Calculating the asymptotic of

when λ → ∞, f(x) is continuous, and S(z) has a degenerate saddle point, is a very rich problem, whose solution heavily relies on the catastrophe theory. Here, the catastrophe theory replaces the Morse lemma, valid only in the non-degenerate case, to transform the function S(z) into one of the multitude of canonical representations. For further details see, e.g., Poston & Stewart (1978) and Fedoryuk (1987).

Integrals with degenerate saddle points naturally appear in many applications including optical caustics and the multidimensional WKB approximation in quantum mechanics.

The other cases such as, e.g., f(x) and/or S(x) are discontinuous or when an extremum of S(x) lies at the integration region's boundary, require special care (see, e.g., Fedoryuk (1987) and Wong (1989)).

Extensions and generalizations

An extension of the steepest descent method is the so-called nonlinear stationary phase/steepest descent method. Here, instead of integrals, one needs to evaluate asymptotically solutions of Riemann–Hilbert factorization problems.

Given a contour C in the complex sphere, a function f defined on that contour and a special point, say infinity, one seeks a function M holomorphic away from the contour C, with prescribed jump across C, and with a given normalization at infinity. If f and hence M are matrices rather than scalars this is a problem that in general does not admit an explicit solution.

An asymptotic evaluation is then possible along the lines of the linear stationary phase/steepest descent method. The idea is to reduce asymptotically the solution of the given RiemannHilbert problem to that of a simpler, explicitly solvable, RiemannHilbert problem. Cauchy's theorem is used to justify deformations of the jump contour.

The nonlinear stationary phase was introduced by Deift and Zhou in 1993, based on earlier work of the Russian mathematician Alexander Its. A (properly speaking) nonlinear steepest descent method was introduced by Kamvissis, K. McLaughlin and P. Miller in 2003, based on previous work of Lax, Levermore, Deift, Venakides and Zhou. As in the linear case, steepest descent contours solve a min-max problem.

The nonlinear stationary phase/steepest descent method has applications to the theory of soliton equations and integrable models, random matrices and combinatorics.

See also

Pearcey integral

Notes

  1. A modified version of Lemma 2.1.1 on page 56 in Fedoryuk (1987).
  2. Lemma 3.3.2 on page 113 in Fedoryuk (1987)
  3. Poston & Stewart (1978), page 54; see also the comment on page 479 in Wong (1989).
  4. Fedoryuk (1987), pages 417-420.
  5. This conclusion follows from a comparison between the final asymptotic for I0(λ), given by equation (8), and a simple estimate for the discarded integral I1(λ).
  6. This is justified by comparing the integral asymptotic over Rn [see equation (8)] with a simple estimate for the altered part.
  7. See equation (4.4.9) on page 125 in Fedoryuk (1987)
  8. Rigorously speaking, this case cannot be inferred from equation (8) because the second assumption, utilized in the derivation, is violated. To include the discussed case of a purely imaginary phase function, condition (9) should be replaced by
  9. See equation (2.2.6') on page 186 in Fedoryuk (1987)

References

This article is issued from Wikipedia - version of the 6/12/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.