Lunocet
The Lunocet is a biomimetic monofin intended to reduce drag and augment human swimming ability underwater. It models the dolphin tail by replicating the geometry, scale, and morphology dynamics of what the manufacturer calls the lunate tail propulsor, as the shape is similar to a crescent moon.
Description
The Lunocet is a 5.3 lb (2.4 kg) monofin built from aluminum and rubber with a span of 30 inches. It is attached to a diver using road cycling or triathlon shoes screwed to an aluminum plate oriented at a 30-degree angle to the resting plane of the flukes, to compensate for the angle of the ankle when extended.[1] It was designed by Ted Ciamillo and is made in the USA
Features
- The manufacturer claims an advantage over traditional fins because of its hydrodynamic shape. It has a high aspect ratio and large surface area, which can propel an experienced diver to a maximum speed of eight mph (13 km/h).
- A spring-loaded mechanism adjusts the angle of attack of the flukes using the water pressure from swimming. The rubber spring can be set on three different tension settings from flexible for slow relatively efficient swimming through more rigid for sprinting.[2]
- A cambered foil can be more efficient than a symmetrical foil but a rigid cambered foil is efficient for producing lift in just one direction. The Lunocet uses the water pressure to induce camber in the flexible flukes which are symmetric at rest. The camber is dynamic and changes sides with up and down stroke. The flexibility is mostly at the tips and trailing edge.
- The core, foot deck and peduncle are constructed of anodized CNC machined aluminum. The flukes are a composite of rubber compression molded around an aluminum core frame. The hinge pin is 316 stainless steel with a delrin bearing.
- Road cycling or triathlon shoes are used to attach the fin to the diver. Power transfer is through the rigid soles into the peduncle (the part which transitions the feet to the flukes).[3] All road cycling and triathlon shoes have a standard bolt-hole pattern which mates with the bolt-hole pattern on the foot deck and can be attached using six stainless steel screws.
See also
- Diving equipment
- DeeperBlue.com Review "The Lunocet Pro 2015 Review"
- DeeperBlue.com Forum Discussion "2015 LUNOCET PRO"
References
1. http://www.scientificamerican.com/article.cfm?id=dolphin-inspired-man-made-fin
2. http://web.archive.org/web/20110316003318/http://www.lunocet.com:80/blog/[]
3. http://web.archive.org/web/20130815064736/http://caw-designs.com:80/?page_id=460