Low-Density Supersonic Decelerator

Low-Density Supersonic Decelerator

Artist's rendering of LDSD test vehicle in flight
Manufacturer Jet Propulsion Laboratory
Country of origin United States
Operator NASA
Applications Technology demonstrator
Specifications
Spacecraft type Hypercone
Launch mass 3,120 kg (6,878 lb)[1]
Dimensions Diameter: 4.7 m (15 ft 5 in)[1]
Regime Suborbital
Production
Status In production
Built 3
On order 0
Launched 2
First launch June 28, 2014 (2014-06-28)

The Low-Density Supersonic Decelerator or LDSD is a reentry vehicle designed to test techniques for atmospheric entry on Mars. The disc-shaped LDSD uses an inflatable structure called the Supersonic Inflatable Aerodynamic Decelerator (SIAD), which is essentially a donut-shaped balloon, to create atmospheric drag in order to decelerate the vehicle before deploying a large supersonic parachute.[2] The goal of the project is to develop a reentry system capable of landing 2- to 3-ton payloads on Mars, as opposed to the 1-ton limit of the currently used systems.[3]

The vehicle is being developed and tested by NASA's Jet Propulsion Laboratory.[1] Mark Adler is the project manager.[4]

The vehicle was tested in 2014 and 2015, and a third test is planned for 2016.[5]

June 2014 test flight

Video of the 2014 test flight

The test flight took place on June 28, 2014, with the test vehicle launching from the United States Navy's Pacific Missile Range Facility on Kauaʻi, Hawaiʻi, at 18:45 UTC (08:45 local).[4] A high-altitude helium balloon, which when fully inflated has a volume of 975,000 cubic meters (34,430,000 cu ft),[1] lifted the vehicle to 36,500 meters (119,900 ft).[6] The vehicle detached at 21:05 UTC (11:05 local),[4] and four small, solid-fuel rocket motors spun up the vehicle to provide stability.[6]

A half second after spin-up, the vehicle's Star 48B solid-fuel motor ignited, powering the vehicle to Mach 4.32 and a peak altitude of 58,200 meters (190,900 ft).[6] Immediately after rocket burn-out, four more rocket motors despun the vehicle.[1] Upon slowing to Mach 4.08, the 6-meter (20 ft) tube-shaped Supersonic Inflatable Aerodynamic Decelerator (SIAD-R configuration) deployed.[6] SIAD is intended to increase atmospheric drag on the vehicle by increasing the surface area of its leading side, thus increasing the rate of deceleration.[7]

Upon slowing to Mach 2.54 (around 86 seconds after SIAD deployment[1]), the Supersonic Disksail (SSDS) parachute was deployed to slow the vehicle further.[6] This parachute measures 30.5 meters (100 ft) in diameter, twice the area of the one used for the Mars Science Laboratory mission.[8] However, it began tearing apart after deployment,[9] and the vehicle impacted the Pacific Ocean at 21:35 UTC (11:35 local) travelling 32 to 48 kilometers per hour (20 to 30 mph).[4][10] All hardware and data recorders were recovered.[7][10] Despite the parachute incident, the mission was declared a success; the primary goal was proving the flight worthiness of the test vehicle, while SIAD and SSDS were secondary experiments.[7]

2015 test flights

A second test flight of LDSD took place in June 2015, at the Pacific Missile Range Facility. This test focused on the 6-meter (20 ft) SIAD-R and Supersonic Ringsail (SSRS) technologies, incorporating lessons learned during the 2014 test.[11] Changes planned for the parachute included a rounder shape and structural reinforcement.[9] After several weather-related scrubs, the flight occurred on June 8.[12][13] As in the first test, the SIAD structure inflated successfully but the parachute was damaged during deployment.[14][3]

References

  1. 1 2 3 4 5 6 "Press Kit: Low-Density Supersonic Decelerator (LDSD)" (PDF). NASA.gov. May 2014. Retrieved August 12, 2014.
  2. ↑ Erdman, Shelby Lin; Botelho, Greg (June 29, 2014). "NASA tests flying saucer craft for future manned mission to Mars". CNN.com. Retrieved August 12, 2014.
  3. 1 2 Alan Boyle. "Oh, Chute! NASA's Flying Saucer Test Ends With Only Partial Success". NBC News. Retrieved June 9, 2015.
  4. 1 2 3 4 Carney, Emily (July 1, 2014). "NASA's Low-Density Supersonic Decelerator Test Flight Hailed as a Success". AmericaSpace. Retrieved August 12, 2014.
  5. ↑ Agle, D. C. (March 26, 2015). "Take a Spin With NASA Cutting-edge Mars Landing Technology". NASA. Retrieved March 28, 2015.
  6. 1 2 3 4 5 Parslow, Matthew (June 28, 2014). "LDSD passes primary technology test but suffers chute failure". NASA Spaceflight. Retrieved August 12, 2014.
  7. 1 2 3 McKinnon, Mika (June 29, 2014). "A Successful First Flight for of the Saucer Test Vehicle over Hawaii". io9.com. Retrieved August 12, 2014.
  8. ↑ Chang, Alicia (June 1, 2014). "NASA to test giant Mars parachute on Earth". Las Vegas Review-Journal. Associated Press. Retrieved August 12, 2014.
  9. 1 2 Boyle, Alan (August 8, 2014). "Flying Saucer Videos Reveal What Worked and What Didn't". NBC News. Retrieved August 12, 2014.
  10. 1 2 Rosen, Julia (June 30, 2014). "NASA Mars test a success. Now to master the parachute". Los Angeles Times. Retrieved August 12, 2014.
  11. ↑ "Press Kit: Low-Density Supersonic Decelerator (LDSD)" (PDF). NASA. June 2015. Retrieved August 27, 2015.
  12. ↑ Langfold, Christina (June 6, 2015). "NASA's Flying Saucer Look-Alike Test Flight Delayed to Monday". Wall Street OTC. Retrieved June 6, 2015.
  13. ↑ "LDSD Powers Up for Drop". nasa.gov. Retrieved June 9, 2015.
  14. ↑ Allman, Tim (June 9, 2015). "Parachute on Nasa 'flying saucer' fails in test". BBC. Retrieved June 9, 2015.
Wikimedia Commons has media related to Low-Density Supersonic Decelerator.
This article is issued from Wikipedia - version of the 5/13/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.