LDE – Edward Bury to Pfeil

LDE - EDWARD BURY to PFEIL
Quantity 4
Manufacturer Bury, Liverpool
Year(s) of manufacture 1837
Retired by 1854
Wheel arrangement 0-4-0
Axle arrangement B n2
Gauge 1,435 mm (4 ft 8 1⁄2 in)
Driving wheel diameter 1,524 mm
No. of cylinders 2
Cylinder bore 279 mm
Piston stroke 457 mm
Boiler Overpressure 4.0 at
Heating tube length 2438 mm
Evaporative heating area NK

The EDWARD BURY to PFEIL series of early German locomotives were tender engines operated by the Leipzig–Dresden Railway Company (Leipzig-Dresdner Eisenbahn or LDE).

History

The four locomotives were delivered to the LDE in 1838 by Edward Bury and Company of Liverpool, England. They were given the names EDWARD BURY, DRACHE, ADLER and PFEIL.

The locomotives were retired between 1847 and 1854.

Technical features

The boiler was rivetted from several sections. The outer firebox was furnished with a dome that projected a long way forward over the boiler barrel and acted as the steam collection space. The two spring balance safety valves were located on the outer firebox. Two piston pumps provided boiler feedwater; they were driven via an eccentric cam from one of the axles.

The steam cylinder was based on English construction principles and located inside under the level of the axles which meant it required an expensive and heavy cranked axle. The engine drove the second coupled axle. The steam engine was probably fitted with a simple Stephenson valve gear without a steam expansion stage, which would not have permitted any control of steam admission.

The locomotives did not have their own braking equipment. Braking could only be achieved using a hand-operated screw brake on the tender.

See also

Sources

This article is issued from Wikipedia - version of the 7/25/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.