LCDR M class

LCDR M class
Type and origin
Power type Steam
Designer William Kirtley
Builder Neilson and Company
Serial number 2221–2226
Build date 1877
Total produced 6
Specifications
Configuration 4-4-0
UIC class 2′B n2
Gauge 4 ft 8 12 in (1,435 mm)
Driver dia. 6 ft 6 in (1.981 m)
Loco weight 73 long tons 16 cwt (75.0 t)
Fuel type Coal
Boiler pressure 140 psi (0.97 MPa)
Cylinders Two
Cylinder size 17 12 in × 26 in (444 mm × 660 mm)
Valve gear Stephenson
Career
Operators
Class M
Withdrawn 1911–1914
Disposition All scrapped

The LCDR M class was a class of 4-4-0 steam locomotives of the London, Chatham and Dover Railway. The class was designed by William Kirtley and introduced in 1877, intended for the heaviest express services between London and Dover.[1]

History

William Kirtley took over as locomotive superintendent of the railway following the death of William Martley in 1874. Martley’s Europa class 2-4-0 were performing well on the lightly loaded Dover-Flushing boat trains but a larger engine was required for some of the heavier services on the main line. Kirtley therefore designed a 4-4-0 for this purpose. The six locomotives were built by Neilson and Company of Glasgow and introduced during June and July 1877. They proved to be successful for these tasks and were only superseded on the heaviest trains by the larger M3 class The locomotives passed to the South Eastern and Chatham Railway in 1899 and were considered to be sufficiently useful to be worth re-boilering between 1899 and 1903.[2] The class began to be withdrawn and scrapped from 1911.

References

  1. Bradley 1979, pp. 106-108.
  2. Bradley 1979, p. 108.
This article is issued from Wikipedia - version of the 11/28/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.