JPM 03 Loiret

JPM 03 Loiret
Role Amateur-built aircraft
National origin France
Manufacturer Avions Jean-Pierre Marie (JPM)
Designer Jean-Pierre Marie
Status Plans available (2012)
Unit cost
400 (2011)
Developed from JPM 01 Médoc

The JPM 03 Loiret is a French amateur-built aircraft that was designed by Jean-Pierre Marie and produced by Avions Jean-Pierre Marie (JPM) of Le Mesnil-Esnard. The aircraft is a development of the JPM 01 Médoc and is supplied as plans for amateur construction.[1]

The aircraft is named for the French community of Loiret.

Design and development

The Loiret features a cantilever low wing, a two-seats-in-side-by-side configuration enclosed cockpit under a bubble canopy, fixed tricycle landing gear with wheel pants and a single engine in tractor configuration.[1]

The aircraft is made from steel tube with its flying surfaces covered in doped aircraft fabric. Its 7.72 m (25.3 ft) span wing has an area of 8.49 m2 (91.4 sq ft) and mounts flaps. The Loiret was designed specifically to use only the 85 hp (63 kW) Jabiru 2200 four-stroke powerplant.[1]

The aircraft can be built with a single-piece wing or a three-piece folding wing. With the wings folded the resulting width is 2.36 m (7.7 ft), permitting ground transport or storage.[2]

Specifications (JPM 03 Loiret)

Data from Bayerl and JPM[1][2]

General characteristics

Performance

References

  1. 1 2 3 4 Bayerl, Robby; Martin Berkemeier; et al: World Directory of Leisure Aviation 2011-12, page 105. WDLA UK, Lancaster UK, 2011. ISSN 1368-485X
  2. 1 2 JPM (n.d.). "Le JPM 03 " Loiret "" (PDF). Retrieved 4 October 2012.

External links

This article is issued from Wikipedia - version of the 6/18/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.