Hawk (plasterer's tool)

A plasterer covering a wall, using a hawk (in his left hand, carrying some plaster) and finishing trowel (in his right hand, applying plaster to the wall)

A hawk or hod is a tool used to temporarily hold a portion of a viscous material, so that the user can repeatedly, quickly and easily get some of that material on the tool which then applies it to a surface. A hawk consists of a board about 25 cm (9 inches) square with a perpendicular handle fixed centrally on the reverse. The user holds the hawk horizontally with the non-dominant hand and applies the material on the hawk with a tool held in the dominant hand.

Hawks are most often used by plasterers along with a finishing trowel to apply a smooth finish of plaster to a wall. Brick pointers use a hawk to hold mortar while they work. Hawks are also used to hold joint compound for skim coating.

A plasterer's hawk set down after being used; note the remnants of a substance like mortar or plaster

Hand tools

sawhorse toolbox workbench

adjustable spanner antique tools basin wrench block plane brace bradawl breaker bar card scraper cat's paw caulking gun clamp crowbar fish tape grease gun hammer hawk hex key impact driver jack locking pliers lug wrench mallet mitre box monkey wrench multi-tool nut driver paint roller paintbrush pincers pipe wrench pliers plumber wrench plumber's snake plunger podger spanner punch punch down tool putty knife scratch awl screwdriver sledgehammer socket wrench spike maul staple gun stitching awl strap wrench tactical light tire iron tongue-and-groove pliers torque wrench tweezers upholstery hammer wrench

Types of tools Cleaning Cutting and abrasive Forestry Garden Hand Machine and metalworking Measuring and alignment Power

This article is issued from Wikipedia - version of the 9/15/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.

Hawk (plasterer's tool)

See also