Guy (sailing)

A guy (probably from Dutch gei, "brail") is a term for a line (rope) attached to and intended to control the end of a spar on a sailboat. On a modern sloop-rigged sailboat with a symmetric spinnaker, the spinnaker pole is the spar most commonly controlled by one or more guys.

Types

There are two primary types of guys used to control a spinnaker pole:

The afterguy, working guy, or simply guy and sometimes known as a brace is attached to the windward clew of the spinnaker, and runs through the jaws on the outboard end of the pole and back to the cockpit. The afterguy is used to rotate the outboard end of the pole around the mast in order to optimize the sail's effectiveness, depending on the direction of the wind. Because a spinnaker has two clews, there is always a second line identical to the afterguy attached to the leeward clew of the spinnaker. This is called the sheet and serves a slightly different function. When the boat jibes, the spinnaker pole will be moved from one side of the boat to the other, causing the sheet to become the guy and vice versa.
A foreguy may also be used to control the height of the spinnaker pole. It is attached either to the end of the pole or to a bridle on the bottom of the pole, and runs through a padeye on the foredeck rather than directly aft to the cockpit. The foreguy is used to keep the end of the pole from lifting up under heavy wind. In addition, it can be used to change the shape of the spinnaker slightly to make the sail more efficient. The foreguy may be referred to as a downhaul if it is attached to a bridle at the pole's midpoint, but this term is used for other parts of a boat's rigging as well.

Sails, spars and rigging

Rigs	Bermuda rig Cat rig Full rig Gaff rig Junk rig Ljungström rig Mast aft rig

Sail types	Asymmetrical spinnaker Junk sail Lug sail Parafoil Ringtail Spinnaker Turbosail Rotorsail Wingsail

Sails (sail plan)	Blooper Course Crab claw Driver Extra Fisherman Foresail Genoa Gennaker Jib Lateen Mainsail Moonraker Royal Skysail Screecher Spanker Spinnaker Spritsail Staysail Studding Topgallant Topsail Trysail Watersail

Sail anatomy and materials	Bolt rope Clew Foot Head Leech Luff Roach Tack Throat Peak Dacron Technora Kevlar Twaron

Spars	Boom Bowsprit Boomkin Dolphin striker a/k/a Martingale Pelican striker Fore-mast Gaff Jackstaff Jibboom Jigger-mast Jury rigging Main-mast Mast Mizzen-mast Truck Spinnaker pole Spreader Sprit Topmast Yard

Rigging components	Backstay Block Bobstay Boomkicker Braces Buntlines Chainplates Cleat Clevis pin Clewlines Cunningham Deadeye Downhaul Earing Fairlead Forestay Gasket Gooseneck Gunter Guy Halyard Kicker Lazy jack Outhaul Parrel beads Peak Preventer Ratlines Running rigging Shackle Spinnaker chute Standing rigging Sheet Shroud Stay mouse Stays Throat Topping lift Trapeze Traveller Turnbuckle Vang Windex

This article is issued from Wikipedia - version of the 4/7/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.

Guy (sailing)

Types

See also