Goubau line

A Goubau line or Sommerfeld-Goubau line,[1] or G-line for short, is a single wire transmission line used to conduct radio waves at UHF and microwave frequencies.[2][3][4] The dielectric coated transmission line was invented by F. Harms[5] in 1907 and George J. E. Goubau[6] in 1950, based on work on surface waves on wires from 1899 by Arnold Sommerfeld.[7][8] It is used as a feedline at UHF to link high frequency transmitters and receivers to their antennas,[2][3] and in scientific research.[8]

Illustration from Goubau's patent showing the conductor and launchers

Description

1955 article on Goubau feedline for UHF television antennas[3] showing line and cone launchers.

The Goubau line itself consists of a single wire conductor coated with dielectric material.[2] Coupling to and from the G-line is done with conical metal "launchers" or "catchers", with their narrow ends connected for example to the shield of coaxial feed line, and with the transmission line passing through a hole in the conical tips.[2] An advantage of the Goubau line is that it can have lower attenuation due to dielectric losses at high frequencies than other types of transmission line. Parallel line (twin lead) and coaxial cable, which are used to carry lower frequency radio signals, have high losses at the upper end of the UHF band, and are almost useless for distances over 100 feet (33 meters).[2] Goubau lines can serve as low loss antenna feedlines at these frequencies, up to microwave frequencies where waveguide must be used."[2]

A G-line is a type of waveguide, rather than a wire in an electric circuit. The G-line functions by slowing the propagation velocity of EM waves below the free-space velocity, causing the wavefronts to slightly bend inwards towards the conductor, which keeps the waves entrained. Bends of large radius are tolerated, but too sharp a bend in the single wire will cause the line to radiate and lose energy into space. In theory the dielectric coating is a requirement, it slows the wave and focuses it along the wire. But some users note that in practice the finite conductivity of metals may produce a similar effect, and a bare G-line can entrain a propagating wave.

Other structures besides horns have been used to couple radio waves into and out of Goubau lines; waves can be "launched" from planar structures like tapered coplanar waveguides at much higher frequencies, into the terahertz band. The dimension of the single metallic conductor is then typically 1 µm. [9]

The Goubau line conducts energy via one-dimensional electromagnetic surface waves, analogous to the two-dimensional surface waves called ground waves that carry the signal from MF AM broadcasting stations to home AM radios. The ability of surface waves to bend and follow the contour of a conductor explains why AM radio stations can be received on the far side of hills, and how over-the-horizon radar works.

See also

Patents

References

  1. ↑ Yeh, C.; Shimabukuro, F. (2000). The Essence of Dielectric Waveguides. Springer Science & Business Media. ISBN 0387497994.
  2. 1 2 3 4 5 6 Straw, R. Dean, Ed. (2000). The ARRL Antenna Book, 19th Ed. pp. 18.2–18.3. ISBN 0872598179.
  3. 1 2 3 Lieberman, Leonard (April 1955). "The G-Line Antenna Lead-In" (PDF). Radio and Television News. New York: Ziff-Davis Publishing Co. 53 (4): 124–125. Retrieved September 14, 2014.
  4. ↑ Griffith, B. Whitfield, Jr. (2000). Radio-electronic Transmission Fundamentals. SciTech Publishing. pp. 307–308. ISBN 1884932134.
  5. ↑ Harms, F. (1907). "Elektromagnetische Wellen an einem Draht mit isolierender zylindrischer Hulle (Electromagnetic waves on a wire with a cylindrical insulating sheath)". Annalen der Physik. 23. cited in Stulle, Bergoz 2012 The Goubau line, p.148
  6. ↑ Goubau, G. (1950). "Surface waves and their application to transmission lines". Jour. of Applied Physics. Amer. Inst. of Physics. 21: 119. cited in Stulle, Bergoz 2012 The Goubau line, p.148
  7. ↑ Sommerfeld, A. (1899). "Ueber die Fortpflanzung elektrodynamischer Wellen langs eines Drahts". Annalen der Physik und Chemie. 67: 233. cited in Stulle, Bergoz 2012 The Goubau line, p.148
  8. 1 2 Stulle, F.; Bergoz, J. (April 15–19, 2012). "The Goubau line - Surface waves for bench testing of beam instrumentation at high frequencies" (PDF). Newport News, Virginia: Joint Accelerator Conferences Website: 146–148. ISBN 978-3-95450-121-2. Retrieved September 15, 2014.
  9. ↑ T. Akalin, “High Resolution Biosensor based on Surface Wave Transmission Lines at THz Frequencies”, 35th European Microwave Conf., 3-7 Oct. 2005, Paris, France and T. Akalin, "Single-wire transmission lines at terahertz frequencies", IEEE Transactions on Microwave Theory and Techniques (IEEE-MTT), Volume 54, Issue 6, June 2006 Page(s): 2762 - 2767
This article is issued from Wikipedia - version of the 10/1/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.