Gimson and Company

The beam engine at Snibston

Gimson & Co builder's plaque on the cylinder casing of 'C' engine at Claymills Pumping Station

Gimson and Company were founded in 1840 by Josiah and Benjamin Gimson on Welford Road in Leicester. The company were listed as Engineers, Ironfounders, Boiler Makers & General Machinists. They later moved to Vulcan Works, Vulcan Road, Humberstone Road, Leicester.

Expansion

Between 1876 and 1878 a new works, Vulcan Foundry, was developed beside the Midland Railway mainline. The site covered three and a half acres, the foundry shop was 180 ft by 62 ft. It had a workforce of 350 men and all lifting was done with steam hoists and travelling cranes.

Products

Stationary steam engines, passenger and goods lifts, boot and shoe machinery, agricultural machinery.

Preserved steam engines

Woolf compound rotative beam pumping engines;

Four of 1885 at Claymills Pumping Station, Burton on Trent.^[1]
Four of 1891 at Abbey Pumping Station, Leicester

Single-cylinder condensing rotative beam pumping engines of 1879;

One at Snibston Discovery Park, Coalville, Leics
One at Forncett Industrial Steam Museum, Forncett St. Mary, Norfolk

Horizontal single cylinder;

12"×24" of 1895 Snibston Discovery Museum
Engine of 1899 at Hall & Woodhouse., Brewery, Blandford St. Mary, Dorset.

Wall-mounted vertical single cylinder lift engine;

One at Abbey Pumping Station, Leicester

References

Wikimedia Commons has media related to Gimson engines.

↑ Claymills.org, Claymills Pumping Station trust site

This article is issued from Wikipedia - version of the 11/11/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.