Gross axle weight rating

The gross axle weight rating (GAWR) is the maximum distributed weight that may be supported by an axle of a road vehicle. Typically, GAWR is followed by either the letters FR or RR, which indicate front or rear axles respectively.

Importance

Road damage rises steeply with axle weight, and is estimated "as a rule of thumb... for reasonably strong pavement surfaces" to be proportional to the fourth power of the axle weight.[1] This means that doubling the axle weight will increase road damage (2x2x2x2)=16 times.[2][3] For this reason trucks with a high axle weight are heavily taxed in most countries.

Examples of GAWR on common axles.

Axle GAWR (Max) Manufacturer
Dana 302,770 lbsDana Holding Corporation
Dana 352,770 lbsDana Holding Corporation
Dana 443,500 lbsDana Holding Corporation
Dana 505,000 lbsDana Holding Corporation
Dana 606,500 lbsDana Holding Corporation
Dana S 607,000 lbsDana Holding Corporation
Dana 7010,000 lbsDana Holding Corporation
Dana 8012,000 lbsDana Holding Corporation
Dana S 11014,706 lbsDana Holding Corporation
Ford 9-inch axle3,600 lbsFord Motor Company
Ford 8.8 axle3,800 lbsVisteon
Sterling 10.5 axle9,750 lbsVisteon
10.5" Corporate 14 Bolt Differential8,600 lbsAmerican Axle
11.5 AAM10,000 lbsAmerican Axle
10.5 AAM9,000 lbsAmerican Axle
Saginaw 9.5-inch axle6,000 lbsAmerican Axle

Maximum weight laws

In the EU and U.S. legal maximum load restrictions are placed on weight, independent of manufacturer’s rating. In the EU a tractor can generally have 10 tonnes (22,000 lb) on a single axle, with suspension type and number of tires often allowing slightly higher loads. In the U.S. weight restrictions are generally 20,000 pounds (9,100 kg) on a single axle, and 34,000 pounds (15,000 kg) (less than two single axles) on a tandem. The primary factor is distance between axle centerlines, also used to measure bridge formulas. A bridge formula does not reduce axle load allowances, rather Gross Vehicle Weights(GVW), which can affect load distribution and actual axle weights.[4][5][6]

References

  1. Hjort, Mattias; Haraldsson, Mattias; Jansen, Jan (2008). "Road Wear from Heavy Vehicles: An Overiew" (PDF). NVF committee Vehicles and Transports. p. 17+36. ISSN 0347-2485.
  2. "Equivalent Single Axle Load". Pavement Interactive. Retrieved 25 April 2012.
  3. "Truck Weights and Highways" (PDF). South Dokota Department of Transport. Retrieved 25 April 2012.
  4. "Guidelines on Maximum Weights…Criteria (EU)" (PDF). Road Safety Authority. 2013. Retrieved 25 June 2013.
  5. "Freight Management and Operations: Bridge Formula Weights". U.S. Department of Transportation. Retrieved 25 June 2013.
  6. "Freight Management and Operations: Size Regulations". U.S. Department of Transportation. Retrieved 25 Jun 2013.

See also


This article is issued from Wikipedia - version of the 7/28/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.