Dino (automobile)

For the Fiat model of the same name, see Fiat Dino. For the 1958 Formula One car, see Ferrari 246 Dino.
Dino
Owner Ferrari
Country Italy
Introduced 1968 (1968)
Discontinued 1976 (1976)
Markets World

Dino [ˈdinɔ] was a marque for mid-engined, rear-drive sports cars produced by Ferrari from 1968 to 1976. Used for models with engines with fewer than 12 cylinders, it was an attempt by the company to offer a relatively low-cost sports car. The Ferrari name remained reserved for its premium V-12 and flat 12 models until 1976, when "Dino" was retired in favour of full Ferrari branding.

Named to honour Ferrari founder Enzo Ferrari's son and heir Dino Ferrari, the Dino models used Ferrari racing naming designation of displacement and cylinder count with two digits for the size of the engine in deciliters and the third digit to represent the number of cylinders, i.e. 246 being a 2.4-litre 6-cylinder and 308 being a 3.0-litre 8-cylinder. Ferrari street models of the time used a three-digit representation of the displacement in cubic centimeters of one of the 12 cylinders, which would have been meaningless in a brand with differing numbers of cylinders.

History

Lorenzo Bandini's Ferrari Dino 166P in the 1965 1000km Nürburgring

The "Dino" marque was created to market a lower priced, "affordable" sports car capable of taking on the Porsche 911. Ferrari's expensive V12s well exceeded the 911 in both performance and price. Enzo did not want to diminish his exclusive brand with a cheaper car, so the "Dino" was created.

The name "Dino" honours the founder's late son, Alfredo "Dino" Ferrari, credited with designing the V6 engine used by the marque. Along with famed engineer Vittorio Jano, Dino influenced Enzo Ferrari's decision to produce a line of racing cars in the 1950s, with V6 and V8 engine designs. History shows that Alfredo Ferrari did not have a hand in the actual design of the V6 motor that made its way into the Dino.

Ferrari wished to race in the new 1.6 L Formula 2 category in 1967 with the Dino V6 engine. However, the company could not meet the homologation rules which called for 500 production vehicles using the engine to be produced. Enzo Ferrari therefore asked Fiat to co-produce a sports car using the V6, and the front-engined, rear-drive Fiat Dino was born. It used a 2.0 L (1987 cc) version of the Dino V6, allowing Ferrari to compete in the category.

At the time, the thought of using a mid-engine layout in a production car was quite daring, although the design was common in the world of sports car racing. A mid-engined layout placed more of the car's weight over the driven wheels, and allowed for a streamlined nose, but led to a cramped passenger compartment and more challenging handling. Lamborghini created a stir in 1966 with its mid-engined Miura, but Enzo Ferrari felt that a mid-engine Ferrari would be unsafe in the hands of his customers. Eventually he relented, and allowed designer Sergio Pininfarina to build a mid-engined concept for the 1965 Paris Motor Show, but demanded that it wear the Dino badge alone. The 1966 Turin car show featured a refined Dino 206S. The Turin 206S was a closer prototype to the actual production version. Response to the radically styled car was positive, so Ferrari allowed it to go into production, rationalizing that the low-power V6 engine would keep his customers out of trouble.

1967 Dino 206 SP, front view
1967 Dino 206 SP, rear view

Road cars

The Dino 246 was the first Ferrari model produced in high numbers.

Dino 206 GT

Dino 206 GT
Overview
Production 1968–1969
Powertrain
Engine 2.0 L V6
Transmission 5-speed manual

The first road-going Dino as well as the first Ferrari-built road car was the 1968 Dino 206 GT, designed by Leonardo Fioravanti at Pininfarina.[1]

The 206 GT used a transverse-mounted 2.0 L all-aluminium 65-degree V6 engine, with 180 PS (132 kW; 178 hp) at 8,000 rpm, the same used in the Fiat Dino. The 206 GT frame featured an aluminium body, full independent suspension, and all round disc brakes. 152 were built in total during 1968 and 1969, in left hand drive only.[2]

Dino 246 GT and GTS

Dino 246 GT and GTS
Overview
Production 1969–1974
Body and chassis
Body style Berlinetta
Targa top
Powertrain
Engine 2.4 L V6
Transmission 5-speed manual

In 1969 the 206 GT was superseded by the more powerful Dino 246 GT. The 246 GT was powered by an enlarged 2.4 L V6 engine, producing with 195 PS (143 kW; 192 hp) at 7,600 rpm in European specification. Initially available as a fixed-top GT coupé, a targa topped GTS was also offered after 1971.

Other notable changes from the 206 were the body, now made of steel instead of aluminium, and a 60 mm (2.4 in) longer wheelbase than the 206. Three series of the Dino 246 GT were built, with differences in wheels, windshield wiper coverage, and engine ventilation. Dino 246 production numbered 2,295 GTs and 1,274 GTSs, for a total production run of 3,569.

Dino 308 GT4 2+2

Dino 308 GT4 2+2
Overview
Manufacturer Ferrari
Production 1973–1976
(branded as Dino)
1976–1980
(branded as Ferrari)
Designer Marcello Gandini at Bertone
Body and chassis
Body style 2+2 coupé
Related Ferrari 308 GTB
Powertrain
Engine 3.0 L V8
Chronology
Successor Ferrari Mondial
Main article: Ferrari GT4

The 308 GT4 was produced from 1973 to April 1980. Initially branded "Dino", the 308 GT4 was Ferrari's first V-8 production automobile.

The 308 was a 2+2 with a wheelbase of 100.4 inches (2,550 mm). The 308 was designed by Bertone; with its angular wedge shape, it looked quite different from the 206/246 from which it was derived.

The 308 GT4 V-8 had a 90-degree, dual-overhead-camshaft, 2927 cc motor with 4 Weber carburetors which produced 250 hp (186 kW). The V-8 block and heads were made of an aluminum alloy. The compression ratio was 8.8:1. The American version had a timing change and an air-pump; it produced a modest 230 hp (172 kW). The GT4 weighed 2535 pounds.

The 308 GT4 wore the Dino badge until May 1976, when it finally got the Ferrari "Prancing Horse" badge on the hood, wheels, and the steering wheel.

References

  1. ↑ Ahlgrim, Steve (June 2014). "Amelia Island 1972 Ferrari 365 GTB/4 Daytonas". Sports Car Market. 26 (6): 67.
  2. ↑ Tyer, Ben. "Ferrari Dino 206 GT". Hampshire, UK: QV500.com.
Wikimedia Commons has media related to Ferrari Dino.
Dino car timeline, 1958–1980
Type 1950s 1960s 1970s 1980
89 0123456789 0123456789 0
6 cylinder Mid-engine berlinetta 206 GT 246 GT
Mid-engine spider 246 GTS
8 cylinder Mid-engine 2+2 308 GT4
208 GT4
Sports prototype 196 S 246 S 166 P 206 S
296 S 206 SP
     Sold as Ferrari after 1976
This article is issued from Wikipedia - version of the 7/7/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.