Engineer in Training

Engineer in Training, or EIT, is a professional designation from the National Council of Examiners for Engineering and Surveying (NCEES) used in the United States to designate a person certified by the state as having completed two requirements:

Once an individual has passed the exam the state board awards that person an Engineer-in-Training (EIT) or an Engineer Intern (EI) designation. EIT and EI are equivalent variations in nomenclature that vary from state to state. Receiving an EIT designation is one step along the path toward Professional Engineer (PE) licensure.

Clarification of the term

In the USA the term "Engineer Intern" (formerly "Engineer in Training")[2] is a ubiquitous misnomer as people with this designation are already engineers, just not fully licensed Professional Engineers (PE). Although they are "in training," the term is misleading in that it sounds as if it implies that they have yet to become engineers. "Engineer Intern"[3] is also a possibly misleading term as it may imply that the engineer is still in college and is working merely in an intern position.

An Engineer-in-Training can do engineering work, such as design, but may utilize the supervision and direction of a Professional Engineer, who are exclusively able to perform certain tasks, such as stamp and seal designs and offer services to the public.[4]

In Canada, an E.I.T. designation means that the person has completed the educational requirement of their P.Eng but has yet to accrue enough work experience (or has yet to apply for a P.Eng). An EIT can perform engineering work under the supervision of a professional engineer. With the exception of New Brunswick, PEO (Ontario) and OIQ (Quebec), EITs are allowed to use the title "Engineer" as long as they also include the EIT designation in either their name or their title. [5]

Significance of the designation

Lack of an EIT designation does not necessarily represent a stigma for an engineer. The inverse is more appropriate: having the EIT designation represents a level of distinction.

Having an EIT designation shows an understanding of fundamental engineering principles, as EITs have passed the Fundamentals of Engineering (FE) exam. It also expresses some level of commitment towards the engineering profession as taking and passing the six-hour FE exam requires a level of dedication and is not something that all engineers have attempted or completed.

Many engineers do not sit for the exam as the EIT designation is not necessary to do engineering work that does not represent a threat to human life. Depending on the profession, having an EIT designation can either be very important or have little bearing on an engineer's career.

EIT designation as a part of PE licensure

Each state's statutes delineate the requirements for the experience and education needed to become a PE once EIT or EI certification has been earned. The requirements vary depending on the State and the licensing board, but for most engineers the process typically includes the following steps:

  1. Graduate from an ABET-accredited four-year university engineering program.
  2. Pass the 6-Hour Fundamentals of Engineering (FE) Examination to receive an Engineer[6] Intern (EI) enrollment or Engineer-in-Training (EIT) certification. The FE exam was an 8-hour exam prior to 2014. Some states such as Kansas and New York use the designation of IE (Intern Engineer), but is essentially the same as EI or EIT. Some states such as Iowa have no EIT or EI designation or certification available through their engineering boards. One just states s(he) passed the FE. An EI/EIT is not a requirement to take the PE exam; passing the FE is a requirement.
  3. Accumulate a set amount of engineering experience, typically under the direction of a PE. In most states the requirement is four years, but in others the requirement is lower.
  4. Pass the 8-hour Principles and Practice of Engineering Exam to receive a PE designation[4]

In California, passing two additional exams is required to gain PE licensure. A seismic exam and a surveying exam, are in addition to the FE and PE exams for civil engineers.

References

  1. ↑ CBT exam format
  2. ↑ http://ncees.org/audience-landing-pages/students/
  3. ↑ http://ncees.org/audience-landing-pages/students/
  4. 1 2 "Licensure". NCEES.org. National Council of Examiners for Engineering and Surveying. Retrieved 2013-03-08.
  5. ↑ https://www.engineerscanada.ca/frequently-asked-questions-for-engineers-in-training-and-members-in-training. Retrieved 2015-08-20. Missing or empty |title= (help)
  6. ↑ http://ncees.org/audience-landing-pages/students/


This article is issued from Wikipedia - version of the 11/30/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.