Command pattern
In object-oriented programming, the command pattern is a behavioral design pattern in which an object is used to encapsulate all information needed to perform an action or trigger an event at a later time. This information includes the method name, the object that owns the method and values for the method parameters.
Four terms always associated with the command pattern are command, receiver, invoker and client. A command object knows about receiver and invokes a method of the receiver. Values for parameters of the receiver method are stored in the command. The receiver then does the work. An invoker object knows how to execute a command, and optionally does bookkeeping about the command execution. The invoker does not know anything about a concrete command, it knows only about command interface. Both an invoker object and several command objects are held by a client object. The client decides which commands to execute at which points. To execute a command, it passes the command object to the invoker object.
Using command objects makes it easier to construct general components that need to delegate, sequence or execute method calls at a time of their choosing without the need to know the class of the method or the method parameters. Using an invoker object allows bookkeeping about command executions to be conveniently performed, as well as implementing different modes for commands, which are managed by the invoker object, without the need for the client to be aware of the existence of bookkeeping or modes.
Uses
Command objects are useful for implementing
- GUI buttons and menu items
- In Swing and Borland Delphi programming, an
Action
is a command object. In addition to the ability to perform the desired command, anAction
may have an associated icon, keyboard shortcut, tooltip text, and so on. A toolbar button or menu item component may be completely initialized using only theAction
object. - Macro recording
- If all user actions are represented by command objects, a program can record a sequence of actions simply by keeping a list of the command objects as they are executed. It can then "play back" the same actions by executing the same command objects again in sequence. If the program embeds a scripting engine, each command object can implement a toScript() method, and user actions can then be easily recorded as scripts.
- Mobile Code
- Using languages such as Java where code can be streamed/slurped from one location to another via URLClassloaders and Codebases the commands can enable new behavior to be delivered to remote locations (EJB Command, Master Worker)
- Multi-level undo
- If all user actions in a program are implemented as command objects, the program can keep a stack of the most recently executed commands. When the user wants to undo a command, the program simply pops the most recent command object and executes its undo() method.
- Networking
- It is possible to send whole command objects across the network to be executed on the other machines, for example player actions in computer games.
- Parallel Processing
- Where the commands are written as tasks to a shared resource and executed by many threads in parallel (possibly on remote machines -this variant is often referred to as the Master/Worker pattern)
- Progress bars
- Suppose a program has a sequence of commands that it executes in order. If each command object has a getEstimatedDuration() method, the program can easily estimate the total duration. It can show a progress bar that meaningfully reflects how close the program is to completing all the tasks.
- Thread pools
- A typical, general-purpose thread pool class might have a public
addTask()
method that adds a work item to an internal queue of tasks waiting to be done. It maintains a pool of threads that execute commands from the queue. The items in the queue are command objects. Typically these objects implement a common interface such asjava.lang.Runnable
that allows the thread pool to execute the command even though the thread pool class itself was written without any knowledge of the specific tasks for which it would be used. - Transactional behavior
- Similar to undo, a database engine or software installer may keep a list of operations that have been or will be performed. Should one of them fail, all others can be reversed or discarded (usually called rollback). For example, if two database tables that refer to each other must be updated, and the second update fails, the transaction can be rolled back, so that the first table does not now contain an invalid reference.
- Wizards
- Often a wizard presents several pages of configuration for a single action that happens only when the user clicks the "Finish" button on the last page. In these cases, a natural way to separate user interface code from application code is to implement the wizard using a command object. The command object is created when the wizard is first displayed. Each wizard page stores its GUI changes in the command object, so the object is populated as the user progresses. "Finish" simply triggers a call to execute(). This way, the command class will work.
Terminology
The terminology used to describe command pattern implementations is not consistent and can therefore be confusing. This is the result of ambiguity, the use of synonyms, and implementations that may obscure the original pattern by going well beyond it.
- Ambiguity.
- The term command is ambiguous. For example, move up, move up may refer to a single (move up) command that should be executed twice, or it may refer to two commands, each of which happens to do the same thing (move up). If the former command is added twice to an undo stack, both items on the stack refer to the same command instance. This may be appropriate when a command can always be undone the same way (e.g. move down). Both the Gang of Four and the Java example below use this interpretation of the term command. On the other hand, if the latter commands are added to an undo stack, the stack refers to two separate objects. This may be appropriate when each object on the stack must contain information that allows the command to be undone. For example, to undo a delete selection command, the object may contain a copy of the deleted text so that it can be re-inserted, if the delete selection command must be undone. Note that using a separate object for each invocation of a command is also an example of the chain of responsibility pattern.
- The term execute is also ambiguous. It may refer to running the code identified by the command object's execute method. However, in Microsoft's Windows Presentation Foundation a command is considered to have been executed when the command's execute method has been invoked, but that does not necessarily mean that the application code has run. That occurs only after some further event processing.
- Synonyms and homonyms.
- Client, Source, Invoker: the button, toolbar button, or menu item clicked, the shortcut key pressed by the user.
- Command Object, Routed Command Object, Action Object: a singleton object (e.g. there is only one CopyCommand object), which knows about shortcut keys, button images, command text, etc. related to the command. A source/invoker object calls the Command/Action object's execute/performAction method. The Command/Action object notifies the appropriate source/invoker objects when the availability of a command/action has changed. This allows buttons and menu items to become inactive (grayed out) when a command/action cannot be executed/performed.
- Receiver, Target Object: the object that is about to be copied, pasted, moved, etc. The receiver object owns the method that is called by the command's execute method. The receiver is typically also the target object. For example, if the receiver object is a cursor and the method is called moveUp, then one would expect that the cursor is the target of the moveUp action. On the other hand, if the code is defined by the command object itself, the target object will be a different object entirely.
- Command Object, routed event args, event object: the object that is passed from the source to the Command/Action object, to the Target object to the code that does the work. Each button click or shortcut key results in a new command/event object. Some implementations add more information to the command/event object as it is being passed from one object (e.g. CopyCommand) to another (e.g. document section). Other implementations put command/event objects in other event objects (like a box inside a bigger box) as they move along the line, to avoid naming conflicts. (See also chain of responsibility pattern).
- Handler, ExecutedRoutedEventHandler, method, function: the actual code that does the copying, pasting, moving, etc. In some implementations the handler code is part of the command/action object. In other implementations the code is part of the Receiver/Target Object, and in yet other implementations the handler code is kept separate from the other objects.
- Command Manager, Undo Manager, Scheduler, Queue, Dispatcher, Invoker: an object that puts command/event objects on an undo stack or redo stack, or that holds on to command/event objects until other objects are ready to act on them, or that routes the command/event objects to the appropriate receiver/target object or handler code.
- Implementations that go well beyond the original command pattern.
- Microsoft's Windows Presentation Foundation (WPF), introduces routed commands, which combine the command pattern with event processing. As a result, the command object no longer contains a reference to the target object nor a reference to the application code. Instead, invoking the command object's execute command results in a so-called Executed Routed Event which during the event's tunneling or bubbling may encounter a so-called binding object that identifies the target and the application code, which is executed at that point.
Example
Consider a "simple" switch. In this example we configure the Switch with two commands: to turn the light on and to turn the light off.
A benefit of this particular implementation of the command pattern is that the switch can be used with any device, not just a light - the Switch in the following example turns a light on and off, but the Switch's constructor is able to accept any subclasses of Command for its two parameters. For example, you could configure the Switch to start an engine.
C#
The following code is an implementation of Command pattern in C#.
namespace CommandPattern
{
using System;
public interface ICommand
{
void Execute();
}
/* The Invoker class */
public class Switch
{
ICommand _closedCommand;
ICommand _openedCommand;
public Switch(ICommand closedCommand, ICommand openedCommand)
{
this._closedCommand = closedCommand;
this._openedCommand = openedCommand;
}
//close the circuit/power on
public void Close()
{
this._closedCommand.Execute();
}
//open the circuit/power off
public void Open()
{
this._openedCommand.Execute();
}
}
/* An interface that defines actions that the receiver can perform */
public interface ISwitchable
{
void PowerOn();
void PowerOff();
}
/* The Receiver class */
public class Light : ISwitchable
{
public void PowerOn()
{
Console.WriteLine("The light is on");
}
public void PowerOff()
{
Console.WriteLine("The light is off");
}
}
/* The Command for turning on the device - ConcreteCommand #1 */
public class CloseSwitchCommand: ICommand
{
private ISwitchable _switchable;
public CloseSwitchCommand(ISwitchable switchable)
{
_switchable = switchable;
}
public void Execute()
{
_switchable.PowerOn();
}
}
/* The Command for turning off the device - ConcreteCommand #2 */
public class OpenSwitchCommand : ICommand
{
private ISwitchable _switchable;
public OpenSwitchCommand(ISwitchable switchable)
{
_switchable = switchable;
}
public void Execute()
{
_switchable.PowerOff();
}
}
/* The test class or client */
internal class Program
{
public static void Main(string[] args)
{
string arg = args.Length > 0 ? args[0].ToUpper() : null;
ISwitchable lamp = new Light();
//Pass reference to the lamp instance to each command
ICommand switchClose = new CloseSwitchCommand(lamp);
ICommand switchOpen = new OpenSwitchCommand(lamp);
//Pass reference to instances of the Command objects to the switch
Switch @switch = new Switch(switchClose, switchOpen);
if (arg == "ON")
{
// Switch (the Invoker) will invoke Execute() (the Command) on the command object - _closedCommand.Execute();
@switch.Close();
}
else if (arg == "OFF")
{
//Switch (the Invoker) will invoke the Execute() (the Command) on the command object - _openedCommand.Execute();
@switch.Open();
}
else
{
Console.WriteLine("Argument \"ON\" or \"OFF\" is required.");
}
}
}
}
Java
import java.util.List;
import java.util.ArrayList;
/** The Command interface */
public interface Command {
void execute();
}
/** The Invoker class */
public class Switch {
private List<Command> history = new ArrayList<Command>();
public void storeAndExecute(Command cmd) {
this.history.add(cmd); // optional
cmd.execute();
}
}
/** The Receiver class */
public class Light {
public void turnOn() {
System.out.println("The light is on");
}
public void turnOff() {
System.out.println("The light is off");
}
}
/** The Command for turning on the light - ConcreteCommand #1 */
public class FlipUpCommand implements Command {
private Light theLight;
public FlipUpCommand(Light light) {
this.theLight = light;
}
@Override // Command
public void execute() {
theLight.turnOn();
}
}
/** The Command for turning off the light - ConcreteCommand #2 */
public class FlipDownCommand implements Command {
private Light theLight;
public FlipDownCommand(Light light) {
this.theLight = light;
}
@Override // Command
public void execute() {
theLight.turnOff();
}
}
/* The test class or client */
public class PressSwitch {
public static void main(String[] args){
// Check number of arguments
if (args.length != 1) {
System.err.println("Argument \"ON\" or \"OFF\" is required.");
System.exit(-1);
}
Light lamp = new Light();
Command switchUp = new FlipUpCommand(lamp);
Command switchDown = new FlipDownCommand(lamp);
Switch mySwitch = new Switch();
switch(args[0]) {
case "ON":
mySwitch.storeAndExecute(switchUp);
break;
case "OFF":
mySwitch.storeAndExecute(switchDown);
break;
default:
System.err.println("Argument \"ON\" or \"OFF\" is required.");
System.exit(-1);
}
}
}
Java 8
Using a functional interface.
/**
* The Command functional interface.<br/>
*/
@FunctionalInterface
public interface Command {
public void apply();
}
/**
* The CommandFactory class.<br/>
*/
import java.util.HashMap;
import java.util.stream.Collectors;
public final class CommandFactory {
private final HashMap<String, Command> commands;
private CommandFactory() {
commands = new HashMap<>();
}
public void addCommand(String name, Command command) {
commands.put(name, command);
}
public void executeCommand(String name) {
if (commands.containsKey(name)) {
commands.get(name).apply();
}
}
public void listCommands() {
System.out.println("Enabled commands: " + commands.keySet().stream().collect(Collectors.joining(", ")));
}
/* Factory pattern */
public static CommandFactory init() {
CommandFactory cf = new CommandFactory();
// commands are added here using lambdas. It is also possible to dynamically add commands without editing the code.
cf.addCommand("Light on", () -> System.out.println("Light turned on"));
cf.addCommand("Light off", () -> System.out.println("Light turned off"));
return cf;
}
}
public final class Main {
public static void main(String[] args) {
CommandFactory cf = CommandFactory.init();
cf.executeCommand("Light on");
cf.listCommands();
}
}
Python
The following code is an implementation of Command pattern in Python.
class Switch(object):
"""The INVOKER class"""
def __init__(self):
self._history = ()
@property
def history(self):
return self._history
def execute(self, command):
self._history = self._history + (command,)
command.execute()
class Command(object):
"""The COMMAND interface"""
def __init__(self, obj):
self._obj = obj
def execute(self):
raise NotImplementedError
class TurnOnCommand(Command):
"""The COMMAND for turning on the light"""
def execute(self):
self._obj.turn_on()
class TurnOffCommand(Command):
"""The COMMAND for turning off the light"""
def execute(self):
self._obj.turn_off()
class Light(object):
"""The RECEIVER class"""
def turn_on(self):
print("The light is on")
def turn_off(self):
print("The light is off")
class LightSwitchClient(object):
"""The CLIENT class"""
def __init__(self):
self._lamp = Light()
self._switch = Switch()
@property
def switch(self):
return self._switch
def press(self, cmd):
cmd = cmd.strip().upper()
if cmd == "ON":
self._switch.execute(TurnOnCommand(self._lamp))
elif cmd == "OFF":
self._switch.execute(TurnOffCommand(self._lamp))
else:
print("Argument 'ON' or 'OFF' is required.")
# Execute if this file is run as a script and not imported as a module
if __name__ == "__main__":
light_switch = LightSwitchClient()
print("Switch ON test.")
light_switch.press("ON")
print("Switch OFF test.")
light_switch.press("OFF")
print("Invalid Command test.")
light_switch.press("****")
print("Command history:")
print(light_switch.switch.history)
Ruby
# Invoker
class Switch
attr_reader :history
def execute(cmd)
@history ||= []
@history << cmd.execute
end
end
# Command Interface
class Command
attr_reader :obj
def initialize(obj)
@obj = obj
end
def execute
raise NotImplementedError
end
end
# Command for turning on
class TurnOnCommand < Command
def execute
obj.turn_on
end
end
# Command for turning off
class TurnOffCommand < Command
def execute
obj.turn_off
end
end
# Receiver
class Light
def turn_on
'the light is on'
end
def turn_off
'the light is off'
end
end
# Client
class LightSwitchClient
attr_reader :switch
def initialize
@lamp = Light.new
@switch = Switch.new
end
def switch_for(cmd)
case cmd
when 'on' then @switch.execute(TurnOnCommand.new(@lamp))
when 'off' then @switch.execute(TurnOffCommand.new(@lamp))
else puts 'Sorry, I so sorry'
end
end
end
client = LightSwitchClient.new
client.switch_for('on')
client.switch_for('off')
client.switch.history #=> ['the light is on', 'the light is off']
Scala
/* The Command interface */
trait Command {
def execute()
}
/* The Invoker class */
class Switch {
private var history: List[Command] = Nil
def storeAndExecute(cmd: Command) {
cmd.execute()
this.history :+= cmd
}
}
/* The Receiver class */
class Light {
def turnOn() = println("The light is on")
def turnOff() = println("The light is off")
}
/* The Command for turning on the light - ConcreteCommand #1 */
class FlipUpCommand(theLight: Light) extends Command {
def execute() = theLight.turnOn()
}
/* The Command for turning off the light - ConcreteCommand #2 */
class FlipDownCommand(theLight: Light) extends Command {
def execute() = theLight.turnOff()
}
/* The test class or client */
object PressSwitch {
def main(args: Array[String]) {
val lamp = new Light()
val switchUp = new FlipUpCommand(lamp)
val switchDown = new FlipDownCommand(lamp)
val s = new Switch()
try {
args(0).toUpperCase match {
case "ON" => s.storeAndExecute(switchUp)
case "OFF" => s.storeAndExecute(switchDown)
case _ => println("Argument \"ON\" or \"OFF\" is required.")
}
} catch {
case e: Exception => println("Arguments required.")
}
}
}
JavaScript
The following code is an implementation of Command pattern in JavaScript.
/* The Invoker function */
"use strict";
class Switch {
constructor() {
this._commands = [];
}
storeAndExecute(command) {
this._commands.push(command);
command.execute();
}
}
class Light {
turnOn() { console.log('turn on') }
turnOff() { console.log('turn off') }
}
class FlipDownCommand {
constructor(light) {
this._light = light;
}
execute() {
this._light.turnOff();
}
}
class FlipUpCommand {
constructor(light) {
this._light = light;
}
execute() {
this._light.turnOn();
}
}
var light = new Light();
var switchUp = new FlipUpCommand(light);
var switchDown = new FlipDownCommand(light);
var s = new Switch();
s.storeAndExecute(switchUp);
s.storeAndExecute(switchDown);
Coffeescript
The following code is an implementation of Command pattern in Coffeescript
# The Invoker function
class Switch
_commands = []
storeAndExecute: (command) ->
_commands.push(command)
command.execute()
# The Receiver function
class Light
turnOn: ->
console.log ('turn on')
turnOff: ->
console.log ('turn off')
# The Command for turning on the light - ConcreteCommand #1
class FlipUpCommand
constructor: (@light) ->
execute: ->
@light.turnOn()
# The Command for turning off the light - ConcreteCommand #2
class FlipDownCommand
constructor: (@light) ->
execute: ->
@light.turnOff()
light = new Light()
switchUp = new FlipUpCommand(light)
switchDown = new FlipDownCommand(light)
s = new Switch()
s.storeAndExecute(switchUp)
s.storeAndExecute(switchDown)
See also
- Software design pattern
- Batch queue
- Closure
- Command queue
- Function object
- Job scheduler
- Model-view-controller
- Priority queue
References
- Freeman, E; Sierra, K; Bates, B (2004). Head First Design Patterns. O'Reilly.
- GoF - Design Patterns
External links
![]() |
Wikimedia Commons has media related to Command pattern. |
![]() |
The Wikibook Computer Science Design Patterns has a page on the topic of: Command implementations in various languages |