ChS3

ChS3

ChS3-45 at the Moscow Railway Museum, Rizhsky Rail Terminal, Moscow
Type and origin
Power type Electric
Builder Škoda Works
Build date 1961
Total produced 87
Specifications
Gauge 1,524 mm (5 ft)
1,520 mm (4 ft 11 27⁄32 in) Russian gauge
Bogies 2
Wheelbase Bo-Bo
Length 17.1 m (56 ft 1 in)
Loco weight 85 t (84 long tons; 94 short tons)
Electric system(s) 3 kV DC Catenary
Current collection Pantograph
Traction motors 4 x 700 kW (940 hp)
Performance figures
Maximum speed 120 km/h (75 mph)
Power output 2,000 hp (1,500 kW)
Career
Operators РЖД (RZhD),
Locale Russia Russia
Soviet Union Soviet Union
Delivered 1961

The ChS3 (Russian: ЧС3) is a type of 4-axle passenger direct current (catenary voltage of 3 kV) electric locomotive, manufactured in 1961, which was used in the Soviet Union and the Russian Federation. In 1960, due to the increase in passenger trains, the Skoda factory was ordered to design and produce a more powerful locomotive type than the ChS1. The plant's management decided to base the new electric locomotives on the ChS1 class of locomotive. Therefore, the more powerful AL4846eT traction motors and traction drive were installed in the experimental ChS1 locomotive (which had the factory designation 29E0). Thus, the ChS3 design was an improved version of the ChS1.

Production

All 87 ChS3 locomotives were built in 1961.

Service

The ChS3 started off serving the Moscow-Kharkov line, before being transferred to the Trans-Siberian Railway, where they operated until 1991. They were often used in pairs. They were gradually replaced with electric ChS2 locomotives.

Standard gauge version

A 1,435 mm (4 ft 8 1⁄2 in) standard gauge version was produced by Skoda for Czechoslovakia ČSD Class E 499.1 and Poland PKP class EP05.

The Polish PKP class ET40 Bo-Bo+Bo-Bo locomotive was also based on the design of the ChS3.

Gallery

See also

References

This article is issued from Wikipedia - version of the 8/27/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.