Boucherot cell

This article relates to loudspeaker driving. See Zobel network for a more general description of telecommunications usage
Boucherot cell correcting loudspeaker impedance

A Boucherot cell (or Zobel network) is an electronic filter, used in audio amplifiers to damp high frequency oscillations that might occur in the absence of loads at high frequencies. Named after Paul Boucherot a Boucherot cell typically consists of a resistor and capacitor in series, that is usually placed across a load, for stability.[1]

It is commonly seen in analog power amplifiers at the output of the driver stage, just before the output inductor. The speaker coil inductance of a loudspeaker generates a rising impedance which is worsened by the output inductor generally found in analog power amplifiers; the cell is used to limit this impedance.[2]

The documentation for some power operation amplifiers suggests the use of a "Boucherot cell between outputs and ground or across the load".[3]

Additionally, Boucherot cells are sometimes used across the bass driver (and mid-range) of a speaker system, in order to maintain a more constant driving point impedance as "seen" by a passive crossover. In this specific arrangement, the Boucherot cell is sometimes also known as a Zobel network.[2]

Some loudspeaker crossover designs aim to stabilize impedance at high frequencies by including Zobel networks.[4]

See also

References

  1. ↑ Rane Professional Audio Reference Home
  2. 1 2 Rane Professional Audio Reference Home
  3. ↑ ST, LOW DROP DUAL POWER OPERATION AMPLIFIERS, July 2003, Top of Page 5, right column.
  4. ↑ Bell Labs Journal: Zobel, O. J., "Theory and Design of Uniform and Composite Electric Wave Filters," Bell Sys. Tech. J., Vol. 2, pp. 1-46, Jan 1923.
This article is issued from Wikipedia - version of the 6/6/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.