Baldwin Locomotive Works

Coordinates: 39°51′33″N 75°19′38″W / 39.85917°N 75.32722°W / 39.85917; -75.32722

Baldwin Locomotive Works
Industry Railway
Fate Bankruptcy
Founded Philadelphia, Pennsylvania, U.S. (1825)
Founder Matthias W. Baldwin
Defunct 1972
Headquarters Eddystone, Pennsylvania, U.S.
Products Locomotives
Baldwin Locomotive Works builder's plate, 1922
Baldwin Locomotive Works c. 1900

The Baldwin Locomotive Works was an American builder of railroad locomotives. It was originally located in Philadelphia, and later moved to nearby Eddystone, Pennsylvania. Although the company was very successful as the largest producer of steam locomotives, its transition to the production of diesels was far less so. Later, when the early demand for diesel locomotives to replace steam tapered off, Baldwin could not compete in the marketplace. It stopped producing locomotives in 1956 and went out of business in 1972, having produced over 70,000 locomotives, the vast majority powered by steam.

This company is not to be confused with E M Baldwin of Australia who made small locomotives for such things as sugar cane tramways.

History: 19th century

Beginning

Matthias W. Baldwin

The Baldwin Locomotive Works had a humble beginning. Matthias W. Baldwin, the founder, was a jeweller and whitesmith,[1] who, in 1825, formed a partnership with a machinist, and engaged in the manufacture of bookbinders' tools and cylinders for calico printing. Baldwin then designed and constructed for his own use a small stationary engine, the workmanship of which was so excellent and its efficiency so great that he was solicited to build others like it for various parties, and thus led to turn his attention to steam engineering. The original engine was in use and powered many departments of the works for well over 60 years, and is currently on display at the Smithsonian Institution in Washington, DC.

In 1831, at the request of the Philadelphia Museum, Baldwin built a miniature locomotive for exhibition which was such a success that he received that year an order from a railway company for a locomotive to run on a short line to the suburbs of Philadelphia. The Camden and Amboy Railroad Company (C&A) had shortly before imported a locomotive (John Bull) from England, which was stored in Bordentown, New Jersey. It had not yet been assembled by Isaac Dripps (under the direction of C&A president Robert L. Stevens) when Baldwin visited the spot. He inspected the detached parts and made notes of the principal dimensions.[2][3] Aided by these figures, he commenced his task.

The difficulties attending the execution of this first order were such that they are not easily understood by present-day mechanics. Modern machine tools simply did not exist; the cylinders were bored by a chisel fixed in a block of wood and turned by hand; the workmen had to be taught how to do nearly all the work; and Baldwin himself did a great deal of it with his own hands.

It was under such circumstances that his first locomotive, christened Old Ironsides, was completed and tried on the Philadelphia, Germantown and Norristown Railroad on November 23, 1832. It was at once put in active service, and did duty for over 20 years. It was a four-wheeled engine, weighing a little over five tons; the driving wheels were 54 inches (1.4 m) in diameter, and the cylinders were of 9 1⁄2 inches (24 cm) bore by 18 inches (46 cm) stroke. The wheels were of heavy cast iron hubs, with wooden spokes and rims, and wrought iron tires, and the frame was made of wood placed outside the wheels. It had a 30 inches (0.76 m) diameter boiler which took 20 minutes to raise steam. Top speed was 28 mph (45 km/h).[4]

Early Years

Baldwin struggled to survive the Panic of 1837. Production fell from 40 locomotives in 1837 to just nine in 1840 and the company was heavily in debt.[5] As part of the survival strategy, Matthias Baldwin took on two partners, George Vail and George Hufty. Although the partnerships proved relatively short-lived, they helped Baldwin pull through the economic hard times.

Zerah Colburn was one of many engineers who had a close association with Baldwin Locomotive Works. Between 1854, (and the start of his weekly paper, (the Railroad Advocate)), and 1861, when Colburn went to work more or less permanently in London, England, the journalist was in frequent touch with M. W. Baldwin, as recorded in Zerah Colburn: The Spirit of Darkness. Colburn was full of praise for the quality of Baldwin's work.

In the 1850s, railroad building became a national obsession,[6] with many new carriers starting up, particularly in the Midwest and South. While this helped drive up demand for Baldwin products, it also increased competition as more companies entered the locomotive production field.[6]

Still, Baldwin had trouble keeping pace with orders and in the early 1850s began paying workers piece-rate pay.[7] Taking advantage of human nature, this increased incentives and productivity. By 1857, the company turned out 66 locomotives and employed 600 men. But another economic downturn, this time the Panic of 1857, cut into business again. Output fell by 50 percent in 1858.[8]

1860-1899

The Civil War at first appeared disastrous for Baldwin. According to John K. Brown in The Baldwin Locomotive Works, 1831-1915: A Study in American Industrial Practice, at the start of the conflict Baldwin had a great dependence on Southern railways as its primary market. In 1860, nearly 80 percent of Baldwin's output went to carriers in states that would soon secede from the Union.[9] As a result, Baldwin's production in 1861 fell more than 50 percent compared to the previous year.[9] However, the loss in Southern sales was counterbalanced by purchases by the U.S. Military Railroads and the Pennsylvania Railroad, which saw its traffic soar, as Baldwin produced more than 100 engines for carriers during the 1861–1865 war.[9]

By the time Matthias Baldwin died in 1866, his company was vying with Rogers Locomotive and Machine Works for the top spot among locomotive producers.[10] By 1870 Baldwin had taken the lead and a decade later, it was producing 2½ times as many engines as its nearest competitor, according to the U.S. Manufacturing Census.[11]

1882 advertisement for the Baldwin Locomotive Works
Baldwin Locomotive Works, Erecting Floor, 1896.[12]

In 1897 the Baldwin Locomotive Works was presented as one of the examples of successful shop management in a series of articles by Horace Lucian Arnold.[13] The article specifically described the Piece Rate System used in the shop management.

Burton (1899) commented, that "in the Baldwin Locomotive Works... piecework rates are seldom altered... Some rates have remained unchanged for the past twenty years, and a workman is there more highly esteemed when he can, by his own exertions and ability, increase his weekly earnings. He has an absolute incentive to increase his output as much as he possibly can, because he knows that he will not, by increasing his own income, lead to cutting piece-work rates, and so be forced to make still further exertions in order to maintain the same weekly wage."[14]

History: 20th century

Plan of the Baldwin Locomotive Works in Philadelphia, c. 1903

Initially, Baldwin built many more steam locomotives at its cramped 196 acres (0.79 km2) Broad Street Philadelphia shop[15] but would begin an incremental shift in production to a 616 acres (2.49 km2) site located at Spring Street in nearby Eddystone, Pennsylvania, in 1906. Broad Street was constricted, but even so, it was a huge complex, occupying the better part of 8 square city blocks from Broad to 18th Streets and Spring Garden Street to the Reading tracks just past Noble Street. Eddystone on the other hand was spread out over 600 acres. Its capacity was well over 3000 locomotives per year. The move from Broad Street was completed in the late 1920s.

Gilded Age

This Baldwin 2-8-0 Consolidation-type locomotive was built for the Oneida & Western Railroad in 1916, and was operated from 1937 to 1953 on the Rahway Valley Railroad's New Jersey short line. Preserved at Steamtown National Historic Site.
California Western Railroad #45 (builder #58045 of 1924), is a 2-8-2 "Mikado" locomotive still in use on the Skunk Train

The American railroad industry expanded significantly between 1898 and 1907, with domestic demand for locomotives hitting its highest point in 1905.[16] Baldwin’s business boomed during this period while it modernized its Broad Street facilities. Despite this boom, Baldwin faced many challenges including the constraints of space in the Philadelphia facility, inflation, increased labor costs, Labor tensions, the substantial increase in the size of the locomotives being manufactured and the formation of the American Locomotive Company, an aggressive competitor which eventually became known simply as Alco.[17]

From 1904 to 1943, Baldwin and Westinghouse marketed Baldwin-Westinghouse electric locomotives and A.C. electrification of railroads, particularly to the New Haven Railroad.

In 1906 the Hepburn Act authorized greater governmental authority over railroad companies, and revitalized the Interstate Commerce Commission (ICC), which stepped up its activities. The ICC was given the power to set maximum railroad rates, and to replace existing rates with “just-and-reasonable” maximum rates, as defined by the ICC.[18]

The limitation on railroad rates depreciated the value of railroad securities, and meant that railroads stopped ordering new equipment, including locomotives. This may have been a factor in precipitating the Panic of 1907, which in turn disrupted finance and investment in new plants. Both of these events had a direct negative effect on the railroad industry, especially the locomotive builders. [19]

Baldwin’s locomotive output dropped from 2,666 in 1906 to 614 in 1908.[16] The company cut its workforce from 18,499 workers in 1907 to 4,600 the following year.[20] Baldwin’s business was further imperiled when William P. Henszey, one of Baldwin’s partners, died. His death left Baldwin with a US $6 million liability.[16] In response, Baldwin incorporated and released US $10 million worth of bonds.[16] Samuel Vauclain wanted to use these funds to expand Baldwin’s capacities so it would be prepared for another boom.[16] While other Baldwin officers opposed this expansion, Vauclain’s vision won out; Baldwin would continue to expand its Eddystone plant until its completion in 1928.[16] By 1928, the company moved all locomotive production to this location, though the plant would never exceed more than one-third of its production capacity.[21]

World War I

Baldwin was an important contributor to the Allied war effort in World War I. Baldwin built 5,551 locomotives for the Allies including separate designs for Russian, French, British and United States trench railways. Baldwin built railway gun carriages for the United States Navy and manufactured 6,565,355 artillery shells for Russia, England and the United States. From 1915 to 1918, Remington Arms subcontracted the production of nearly 2 million Pattern 1914 Enfield and M1917 Enfield rifles to the Baldwin Locomotive Works.[22]

After the end of World War I Baldwin continued to supply export orders, as the European powers strove to replace large numbers of locomotives worn out by the war effort and European locomotive factories were still re-tooling from armaments production back to railroad production. In 1919 and 1920 Baldwin supplied 50 4-6-0 locomotives to the Palestine Military Railway that became the Palestine Railways H class.[23]

Decline

Grand Trunk Western Railway purchased this 4-8-2 Mountain locomotive (#6039) from Baldwin in 1925. This locomotive burned coal, and had Vanderbilt tenders and an enclosed all-weather cab. Preserved at Steamtown National Historic Site.

After the boom years of World War I, Baldwin's business would decline as the Great Depression gripped the country and Diesel engines became the growth market on American railways at the end of the 1930s. During the 1920s the major locomotive manufacturers had strong incentives to maintain the dominance of the steam engine.[24] Nevertheless, ALCO, while remaining committed to steam production, pursued R&D strategies in the 1920s and '30s that would ensure its competitiveness in the event that diesel locomotives would predominate.[25] In contrast, Baldwin in the 1930s discounted the possibility that Diesel could replace steam.[26] In 1930 Samuel Vauclain, Chairman of the Board, stated in a speech that advances in steam technology would ensure the dominance of the steam engine until at least 1980.[27] Baldwin’s Vice President and Director of Sales stated in December 1937 that “Some time in the future, when all this is reviewed, it will be found that our railroads are no more dieselized than they electrified.”[27] Baldwin had deep roots in the steam locomotive industry, and may have been influenced by heavy investment in its Eddystone plant.[26]

In 1928 Baldwin began an attempt to diversify its product line to include small internal combustion-electric locomotives but the Great Depression thwarted these efforts, eventually leading Baldwin to declare bankruptcy in 1935.[16] At the invitation of the owners of the Geo D. Whitcomb Company, a small manufacturer of gasoline and diesel industrial locomotives in Rochelle, Illinois, Baldwin agreed to participate in a recapitalization program, purchasing about half of the issued stock. By March 1931 the small firm was in financial trouble and Baldwin filed a voluntary bankruptcy for Whitcomb with Baldwin gaining complete control and creating a new subsidiary, the Whitcomb Locomotive Company. This action would lead to financial losses, an ugly court battle between Baldwin and William Whitcomb, the former owner of the company, and bankruptcy for both parties.[28][29]

Baldwin lost its dominant position in electric locomotives when the Pennsylvania Railroad selected General Electric's PRR GG1 instead of Baldwin's design in 1934.

When Baldwin emerged from bankruptcy in 1938 it underwent a drastic change in management.[26] The new management revived their development efforts with Diesel power but the company was already too far behind.[26] In 1939 Baldwin offered its first standard line of Diesel locomotives, all designed for yard service. By this time, GM-EMC was already ramping up production of Diesel passenger locomotives and developing its first Diesel road freight locomotive.[30]

As the 1930s drew to a close, Baldwin's coal-country customers such as Pennsylvania Railroad, Chesapeake and Ohio, and Norfolk and Western were more reluctant than other operators to embrace Diesel technology, which could undermine the demand for one of their main hauling markets. All three continued to acquire passenger steam locomotives into the early postwar years, as Dieselization was gaining momentum elsewhere in the rail industry.

In the late 1930s Baldwin and the Pennsylvania Railroad made an all-in bet on the future of steam in passenger rail service with Baldwin's duplex-drive S1 locomotive. It proved difficult to operate, unreliable, costly to maintain, and unsuited for its intended service. Baldwin developed a revision of the same basic design with the T1, introduced in 1943. While the T1s were actually used for PRR's long distance express trains, they still had many of the problems of the S1. The whole S1-T1 venture resulted in losses for PRR and investment in a dead-end development effort for Baldwin at a critical time for both companies. In the early 1940s Baldwin embarked upon its efforts to develop steam turbine power, producing the S2 direct-drive turbine locomotive in 1944. Baldwin's steam turbine program failed to produce a single successful design. Baldwin's steam-centered development path had left them flat-footed in the efforts necessary to compete in the postwar Diesel market dominated by EMD and ALCO-GE.

World War II

SNCF Class 141R n° 1199, built by Baldwin in 1947, now preserved in Nantes, France
Surviving example of a Baldwin DT-6-6-2000 transfer engine, a post-war diesel electric locomotive produced between 1946 and 1950.

The United States' entry into World War II impeded Baldwin's Diesel development program when the War Production Board dictated that Alco and Baldwin produce only steamers and Diesel-electric yard switching engines. Electro-Motive Division (EMD) was assigned the task of producing road freight Diesels (namely, the FT series). EMD's distinct advantage over its competitors in that product line in the years that followed World War II, due to the head start in diesel R&D and production, is beyond doubt, however, assigning it solely to WPB directives is questionable. Longtime GM chairman Alfred P. Sloan presented a timeline in his memoir that belies this assumption,[31] saying that GM's diesel-engine R&D efforts of the 1920s and 1930s, and its application of model design standardization (yielding lower unit costs) and marketing lessons learned in the automotive industry, were the principal reason for EMD's competitive advantage in the late 1940s and afterward (clearly implying that the wartime production assignments were merely nails in a coffin that Baldwin and Lima had already built for themselves before the war). In his telling, the R&D needed to adapt earlier Diesels (best suited to marine and stationary use) to locomotive use (smaller; higher power-to-weight ratio; more reliable given more vibration and less maintenance) was a capital-intensive project that almost no one among the railroad owners or locomotive builders was willing (latter) or able (former) to invest in during the 1920s and 1930s, save the people of Winton, Electro-Motive, and Charles F. Kettering of the GM Research Corporation.[31]

Baldwin was benefited by the petroleum crisis of 1942-43, which boosted demand for their coal-fired steam locomotives while acquisition of EMD's Diesel locomotives was in its most restricted period.

In 1943 Baldwin launched its belated road Diesel program, producing a prototype "Centipede" locomotive which was later rebuilt to introduce their first major product in the postwar market.

During World War II Baldwin's contributions to the war effort included not only locomotives and switchers but also tanks. Baldwin was one of the manufacturers of several variants of the M3 tank (M3 Lee, M3A2, M3A3, M3A5) and later the M4 Sherman. A Baldwin subsidiary, the Whitcomb Locomotive Company, produced hundreds of 65-ton diesel electric locomotives for the Army and received the Army-Navy "E" award for production.[32] Baldwin ranked 40th among United States corporations in the value of wartime production contracts.[33]

End

1954 Baldwin 0-4-4-0 Diesel-Electric Switcher at the Texas Transportation Museum

Between 1940 and 1948, domestic steam locomotive sales declined from 30 percent of the market to 2 percent.[34] By 1949, there was no demand for steam locomotives.[34] Baldwin's attempts to adapt to the changed market for road locomotives had been unsuccessful; the reliability of their offerings was unsatisfactory, epitomized by notorious failures such as their "Centipede" Diesel locomotives and their steam turbine-electric locomotives, which proved to be money pits unsuited for their intended service. In July 1948 Westinghouse Electric, which had teamed with Baldwin to build diesel and electric locomotives and wanted to keep their main customer in the rail industry afloat, purchased 500,000 shares, or 21 percent, of Baldwin stock, which made Westinghouse Baldwin's largest shareholder. Baldwin used the money to cover various debts. Westinghouse vice president Marvin W. Smith became Baldwin's president in May 1949. In a move to diversify into the construction equipment market, Baldwin merged with Lima-Hamilton on December 4, 1950, to become Baldwin-Lima-Hamilton. However, Lima-Hamilton's locomotive technology was unused after the merger and market share continued to dwindle. By January, 1952 Baldwin closed its factory in Rochelle and consolidated Whitcomb production at Eddystone. In 1953 Westinghouse discontinued building electrical traction equipment, so Baldwin was forced to reconfigure their drive systems based on General Electric equipment. In 1954, during which time they were being being virtually shut out of the Diesel market, Baldwin delivered one steam turbine-electric locomotive to the Norfolk and Western railroad, which proved unsatisfactory in service.

In 1956 the Pennsylvania Railroad (PRR)- which was slow in accepting diesels- finally decided to retire its steam fleet, which was the largest in the world at that time, and buy a large order of diesels. Baldwin bid, expecting its lifelong loyal customer to help keep Baldwin in business by buying at least some Baldwin diesels. General Motors' EMD division, however, gave the PRR an exceptional deal on new, reliable GP9s, so the PRR— which was in a financial pinch itself— sent the business to GM. This one lost deal proved to be the end of the line, and—after 125 years of continuous production—Baldwin closed most of its Eddystone plant. It produced no more locomotives after 1956, instead concentrating on heavy construction equipment.[30] More than 70,500 locomotives had been produced when production ceased in 1956.

In 1965 Baldwin became a wholly owned subsidiary of Armour and Company.[35] Greyhound Corporation purchased Armour and Company in 1970, and in 1972 Greyhound closed Baldwin-Lima-Hamilton for good.[36]

Locomotives

Later steam locomotives

Woodburytype of 0-4-0 type Boston & Maine Achilles, 1871
An 1872 Baldwin locomotive of 4-4-0 type used on the Hanko-Hyvinkää Railroad in Finland.
A 1902 Baldwin locomotive of 2-6-2 type used on the Atchison, Topeka and Santa Fe Railway in New Mexico where it is now on permanent display in Las Vegas, NM.
Baldwin works photo of Lyn', May 1898
M&PP 5, an 0-4-2T, at the depot in Manitou Springs
2-8-0 2 ft 6 in (762 mm) narrow gauge on static display, Toa Baja, Puerto Rico.

Baldwin built many 4-4-0 "American" type locomotives (the locomotive that built America). Surviving examples of which include the 1872 Countess of Dufferin and 1875's Virginia and Truckee Railroad No.22 "Inyo", but it was perhaps best known for the 2-8-2 "Mikado" and 2-8-0 "Consolidation" types. It was also well known for the unique cab-forward 4-8-8-2 articulateds built for the Southern Pacific Company and massive 2-10-2 for the Atchison, Topeka and Santa Fe Railway. Baldwin also produced their most powerful steam engines in history, the 2-8-8-4 "Yellowstone" for the Duluth, Missabe and Iron Range Railway. The Yellowstone could put down over 140,000 lbf (622.8 kN) of Tractive force. They routinely hauled 180 car trains weighing over 18,000 short tons (16,071 long tons; 16,329 t). The Yellowstones were so good that the DM&IR refused to part with them; they hauled ore trains well into the diesel era, and the last one retired in 1963. Three have been preserved. One of Baldwin's last new and improved locomotive designs were the 4-8-4 "Northern" locomotives. Baldwin's last domestic steam locomotives were 2-6-6-2s built for the Chesapeake and Ohio Railway in 1949. Baldwin 60000, the company's 1926 demonstration steam locomotive, is on display at the Franklin Institute in Philadelphia. On a separate note, the restored and running 2-6-2 steam locomotive at Fort Edmonton Park was built by Baldwin in 1919.

Preserved Baldwin steam locomotives

There are many Baldwin built steam locomotives currently operating in the United States, Canada, and several other countries around the world. Out of all the Baldwin built steam locomotives that are operational or have operated in recent years, the most recognized locomotives are Reading 2101, Southern Railway 4501, Frisco 1522, Nickel Plate 587, Southern Pacific 2467, Southern Pacific 2472, Spokane, Portland and Seattle 700, and the oldest surviving 4-8-4 Northern type steam locomotive, Santa Fe 3751.

Narrow Gauge and Unconventional

Baldwin Locomotive Works built steam engines for narrow-gauge railways as well. They also built many boilers for heating and powering buildings and industry. One of the more notable series of narrow gauge locomotives built by Baldwin was the K-36 class Mikados of the Denver and Rio Grande Western RR. Built in 1925, the fleet of ten has seen only one scrapped (485 in 1955, as a result of falling into the turntable pit in Salida, CO). All of the nine remaining engines are operating today on the Durango and Silverton Narrow Gauge Railroad, or the Cumbres and Toltec Scenic Railroad.

New Zealand Railways (NZR) was a major customer from 1879 when it imported six 2-8-0 based on the Denver and Rio Grande locomotives due to their similar rail gauge, these were given the road class of T. The next was a double emergency order of six 2-6-2 classed N and six 2-8-0 classed O after a British order for similar locomotives failed to meet ontime delivery and weight limitations specified in contract. Baldwins seized on the opportunity to impress the NZR with a prompt six-month delivery of all 12 locomotives. There after NZR ordered Baldwin products to complement home built locomotives, including Tank versions 2-6-2 Wb and 2-6-4 Wd classes. Another four of the hard working N class were purchased in 1901. The popular 4-6-0 class of 22 Ub locomotives consisting of 10 1898 flat valve and 10 1901 piston valve (Baldwins supplying all but two) proved themselves well at the turn of the twentieth century with the last retiring as late as 1958. A requirement for a larger firebox version of the class ended up creating a whole new locomotive with the birth of the 4-6-2 wheel arrangement, the Pacific was born. They were classed as Q in NZR service and remained in use until 1957. Being a new type of locomotive, the Q class had their shortcomings but eventually performed well (Sadly, none have been preserved except one engine, originally sold to the Newfoundland Railway in September 1920. Engine #593, affectionately known as the "Newfie Bullet", is being restored in Corner Brook, Newfoundland, Canada.)[37] In 1914 a later larger improved version, and last Baldwin product to be purchased by NZR was classed as Aa. They lasted until 1959. Like all American locomotives produced at the time, the Baldwins had 'short' lifespans built into them but the NZR were happy to re-boiler almost their whole fleet to give them a longer life of hard work. NZR were generally happy with their Baldwin fleet. A private Railway operating in New Zealand at the time exclusively purchased Baldwin products after facing the same difficulties with British builders the NZR had. The Wellington and Manawatu Railway (1881–1909) operated small fleets of 2-8-0(4), 2-6-2(6), 2-8-2(1), 4-6-0(2) and a large 2-8-4(1) tank locomotive. When the NZR took over the railway, its fleet was absorbed into sub-classes of those operating already in the main fleet. When NZR placed tenders for Diesel locomotives in the 1950s, Baldwins applied but failed when EMD won the contract instead. Surprisingly only one NZR Baldwin product is operational, a class Wd 2-6-4 tank locomotive operating at the Ferrymead railway in Christchurch, the remains of a WMR 2-6-2 N, NZR 4-6-0 Ub, and two NZR 2-6-2 Wb tank locomotives are in the early stages of restoration.

A six-ton, 60-cm gauge 4-4-0 built for the Tacubaya Railroad in 1897 was the smallest ever built by Baldwin for commercial use.[38]

In the late 1890s, many British builders were recovering from an engineers' strike over working hours, leaving backlogs of orders yet to be fulfilled. This prompted British railways that were in immediate need for additional motive power to turn to Baldwin and other US builders. Examples of engines built in response include the 2501 class of 2-6-0's built for the Midland Railway and the Lyn, a 2-4-2T(tank locomotive) for the 1 ft 11.5 in (597 mm) gauge Lynton and Barnstaple Railway in England in 1898. The Cape Government Railways of South Africa also bought engines from Baldwin as a result of the strikes. Unfortunately, many of these engines were unpopular with the crews due to their designs being atypical, and many, including all Midland Railway 2501's and the Lynton and Barnstaple's Lyn, were scrapped when no longer needed. A replica of the latter locomotive is currently under construction for the revived Lynton & Barnstaple Railway.[39]

Also during the late 1890s, two 2-6-2T 'Prairie' tank engines were built for Victorian Railways (VR). They were used as a trial on the new 2 ft 6 in (762 mm)narrow gauge railways. Fifteen more NA class locomotives were built by VR. Unfortunately only six have survived and both of the original Baldwin engines were among those scrapped.

To supply troops in France, 495 4-6-0PTs were built to the order of the British War Department in 1916/7. After the war surplus locomotives were sold, finding new uses in France, Britain and India. In Britain examples were used on the Ashover Light Railway, Glyn Valley Tramway, Snailbeach District Railways and the Welsh Highland Railway. The Welsh Highland Railway in Wales bought No 590, in 1923. It was apparently unpopular with crews although photographs show that it was used regularly until the railway was closed. It was scrapped in 1941 when the derelict railway's assets were requisitioned for the war effort. Some of the surviving examples in India have since been imported to the UK, one of which by the Welsh Highland Railway Ltd. who has restored it to represent the scrapped 590. Other Baldwin 4-6-0PT's imported from India include one owned by the Leighton Buzzard Railway-based Greensand Railway Trust that has been restored to working order, as well as two acquired by the Statfold Barn Railway in March 2013.

Baldwin also built six engines for the Manitou and Pike's Peak Railway, three of which were delivered in 1890, with the fourth being delivered in 1897. These engines featured steeply inclined boilers and used the Abt rack system to propel them up the average 16 percent grade. The last Baldwin engine was taken out of regular service in 1955. During the following years the engines were used as back-up engines and for snow removal. Three of the engines are currently on static display around Colorado. One (No. 1) is located at the Colorado Railroad Museum in Golden, Colorado. The other two on display are located in Manitou Springs, Colorado: one (No. 2) near city hall and the other (No. 5) at the Manitou and Pike's Peak Railway depot. The engine No. 4 is still in limited operation for photo opportunities and special events. However, it no longer completes the journey to the top of Pike's Peak due to the fact that many of the water tanks along the line have been removed. Engines No. 3 and No. 6 were scrapped and used for parts over the years.

MCRR Baldwin Mogul Number-6 001

Number 6 (builder plate number 12288), a 36" 2-6-0 was built by Baldwin in 1891 for the Surry Sussex & Southampton Railway in Virginia. The SS&S installed Southern valve gear, a graceful outside drive gear. The 6 was eventually sold to the Argent Lumber Company in South Carolina. In 1960, the 6 was purchased by southeastern Iowa's Midwest Central Railroad as part of a package deal including the 2 (below). It was the first locomotive to operate on a regular basis at the MCRR and was their main engine until 1971 when it was taken out of service for a major overhaul. Completed in 1988, this ground up rebuild included a new boiler and conversion to oil fire. A "medium" boiler repair was started in 2009, with the work completed in September 2010, in time for the 2010 Midwest Old Thresher's Reunion.

The Midwest Central Railroad also owns Number 2, a 36" 2-6-0, which was built for the New Berlin & Winfield Railroad in 1906. The NB&W operated an 8-mile (13 km) line in Pennsylvania for an agricultural community. The 2 hauled freight and passengers on this small operation until the mid-1910s. In 1917, the locomotive was sold to the Argent Lumber Company in South Carolina where it worked along with the 6 in swamp trackage, hauling logs to the mill in Hardeeville. Upon arrival at the MCRR in 1960, it received substantial repairs and was put into service by the early 70's, replacing the 6 as the MCRR's main engine. In 1987, the 2 was taken out of service for a complete rebuild which is still in progress as of January 2011.

Electric locomotives

From the early years of the 20th century Baldwin had a relationship with the Westinghouse Electric Company to build electric locomotives for the American market. The electric locomotive was increasingly popular; electrification was expensive, but for high traffic levels or mountainous terrain it could pay for itself, and in addition some cities like New York, were banning the steam locomotive because of its pollution and the propensity for accidents in smoke-choked terminals. Baldwin built or subcontracted out the bodywork and running gear, and Westinghouse built the electrical gear. Both combined to have a similar arrangement with the Netherlands N.V. Heemaf and Werkspoor for the foreign markets.[40]

Baldwin built the famed EP-1 (1906), EF-1 (1912) and EP-2 (1923) box cab electric locomotives for the New York, New Haven and Hartford Railroad. Baldwin also delivered the EP-3 box cab electric locomotives to the Milwaukee Road for use on their line between Harlowton, Montana, and Avery, Idaho.

Baldwin built several electric locomotive types for the Pennsylvania Railroad as well including the P5A, R1 and the famed GG1. Baldwin built the first GG1 prototype electric locomotive for use on the Pennsylvania Railroad’s electrified line, which was completed in 1935 between New York and Washington, D.C.

Steam-turbine locomotives

PRR class S2 #6200
C&O class M-1 #500

In the waning years of steam Baldwin also undertook several attempts at alternative technologies to diesel power. In 1944 Baldwin outshopped an S2 class 6-8-6 steam turbine locomotive for the Pennsylvania Railroad.

Between 1947 and 1948 Baldwin built three coal-fired steam turbine-electric locomotives of a unique design, for passenger service on the Chesapeake and Ohio Railway (C&O), who numbered then 500 to 502 and classified them M-1. The 6,000 horsepower (4,500 kW) units, which were equipped with Westinghouse electrical systems and had a 2-C1+2-C1-B wheel arrangement, were 106 feet (32 m) long, making them the longest locomotives ever built for passenger service. The cab was mounted in the center, with a coal bunker ahead of it and a backwards-mounted boiler behind it (the tender only carried water). These locomotives were intended for a route from Washington, D.C., to Cincinnati, Ohio, but could never travel the whole route without some sort of failure. Coal dust and water frequently got into the traction motors. These problems could have been fixed given time, but it was obvious that these locomotives would always be expensive to maintain, and all three were scrapped in 1950.

In May 1954 Baldwin built a 4,500 horsepower (3,400 kW) steam turbine-electric locomotive for freight service on the Norfolk and Western Railway (N&W), nicknamed the "Jawn Henry" after the legend of John Henry, a steel-driver on a track crew who famously raced against a steam drill and won, only to die immediately afterwards. The unit was similar in appearance to the C&O turbines but very different mechanically; it had a C+C-C+C wheel arrangement, and an improved watertube boiler which was fitted with automatic controls. Unfortunately the boiler controls were sometimes problematic, and (as with the C&O turbines) coal dust and water got into the motors. "Jawn Henry" was retired from the N&W roster on January 4, 1958.

Diesel-electric locomotives

Magma Railroad Baldwin #10. The Baldwin Locomotive Works built this locomotive in 1950 as a DRS 6-6-1500, diesel for the McCloud River Railroad as #29.
Brazilian AS616 class

Baldwin switchers were well known for their haulage ability, but the company failed to make the jump to building reliable road units. Baldwin also misjudged the market, remaining fond of steam power and concentrating on products of little interest to railroads.

Baldwin diesel locomotives, though fairly successful in the marketplace, did not do so well as others. Baldwins, thanks to their robust Westinghouse electrical gear, were excellent haulers, but the diesel prime movers were less reliable than comparable EMD and ALCO products.

Street Railways / Tramway Steam Motors

As well as Railway Locomotives, Baldwin built Street Tramway Steam Motors in large numbers for operators in the United States and worldwide. There were three basic models, 9" 11" and 13" motors. These sizes being determined by the cylinder size, not the boiler capacity. These were largely superseded by electric Streetcars / Tramcars, but some were built and operated well into the 20th century for systems that were never electrified. There were well over 100 built for the New South Wales Government Tramways in Sydney Australia from 1879-1910. Mostly 11" and 0-4-0 in configuration. Two operational NSWGT surviving Steam Motors: Baldwin 11676 of 1891 NSWGT No.103 Valley Heights Locomotive Depot Heritage Museum, New South Wales, Australia. Baldwin 11665 of 1891 NSWGT No.100 Museum of Transport and Technology, Auckland, NZ. No.100 was latterly used in Wanganui, New Zealand 1910-1950. Other Baldwin Steam Motor operators included: The Takapuna Tramways and Ferry Company, Auckland, New Zealand 1910-1927. Route was from Bayswater to Milford via Takapuna and Lake Pupuke. No surviving locomotives.

See also

References

  1. ↑ Morris, Charles R. Morris ; illustrations by J.E. (2012). The dawn of innovation : the first American Industrial Revolution (1st ed.). New York: PublicAffairs. p. 220. ISBN 978-1-58648-828-4.
  2. ↑ Alexander 2003, p. 26.
  3. ↑ Warner 1924, p. 7.
  4. ↑ Kerr, James (1983). Illustrated Treasury of Baldwin Locomotives (First ed.). Alburg, VT: DPA-LTA Enterprises, Inc. p. 4. ISBN 091929510X.
  5. ↑ Brown 1995, p. 9.
  6. 1 2 Brown 1995, p. 19.
  7. ↑ Brown 1995, p. 20.
  8. ↑ Brown 1995, p. 21.
  9. 1 2 3 Brown 1995, p. 25.
  10. ↑ Brown 1995, p. 27.
  11. ↑ Brown 1995, p. 244.
  12. ↑ Arnold, Horace L. "Modern Machine-Shop Economics. Part II" in Engineering Magazine 11. 1896
  13. ↑ Horace Lucian Arnold (Henry Roland). "Six examples of successful shop management. IV. Pre-Eminent Success of the Differential Piece Rate System" Engineering Magazine 12. 1897. p. 831-37.
  14. ↑
  15. ↑ Hexamer, Ernest (1874), "Baldwin Locomotive Works", Hexamer General Surveys, Philadelphia, Pennsylvania, USA, 9, plates 756–758.
  16. 1 2 3 4 5 6 7 Brown 1995, p. 216.
  17. ↑ Brown 1995, pp. 208–214.
  18. ↑ "The Rise of the Interstate Commerce Commission". Yale Law Journal. 24 (7): 534–535. May 1915. Retrieved 23 April 2014.
  19. ↑ Brown 1995, p. 215.
  20. ↑ Brown 1995, p. 241.
  21. ↑ Brown 1995, p. 228.
  22. ↑ Westing 1982, pp. 76–85.
  23. ↑ Cotterell 1984, pp. 28–29.
  24. ↑ Marx 1976, p. 5.
  25. ↑ Marx 1976, p. 12.
  26. 1 2 3 4 Marx 1976, p. 15.
  27. 1 2 Marx 1976, p. 16.
  28. ↑ National Archives, U.S. Federal Court, Northern District of Illinois, Western Division, Bankruptcy No. 2065, filed March 5, 1931
  29. ↑ Archives of the Circuit Court of Cook County, Illinois, Case No. 34C 1936, filed February 14, 1934
  30. 1 2 Marx 1976, p. 17.
  31. 1 2 Sloan 1964, pp. 341–353.
  32. ↑ Whitcomb Locomotive Works
  33. ↑ Peck, Merton J. & Scherer, Frederic M. The Weapons Acquisition Process: An Economic Analysis (1962) Harvard Business School p.619
  34. 1 2 Marx 1976, p. 18.
  35. ↑ Staff Writer. "BLH, Armour Plan Merger; $87 Million Value is Seen." Delaware County Daily Times 2 April 1965: 2.
  36. ↑ Staff Writer. " 140-Year-Old Industry Dies: BLH Plant Grinds to a Halt" Delaware County Daily Times 29 April 1972: 1.
  37. ↑ http://yourrailwaypictures.com/newfoundlandrailway/
  38. ↑ Best 1968, p. 75.
  39. ↑ 762club, Project to recreate Baldwin 2-4-2 Lyn
  40. ↑ Jasper Faber The Perils and Advantages of Licensing Technology in the Electrical Industry: Heemaf 1908-1970 http://www.gtg.tu-berlin.de/.../306-jasper-faber-the-perils-and-advantages... also Heemaf (Dutch)

Bibliography

Further reading

External links

Wikimedia Commons has media related to Baldwin Locomotive Works and Baldwin locomotives.
This article is issued from Wikipedia - version of the 11/28/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.