B&O Railroad Bridge

B&O Railroad Bridge

B&O Railroad Bridge looking southwest along the two railroad tracks

B&O Railroad Bridge looking southwest
Coordinates 39°56′08″N 75°12′21″W / 39.93556°N 75.20583°W / 39.93556; -75.20583
Carries Railroad
Crosses Schuylkill River
Locale Grays Ferry neighborhood in Philadelphia, Pennsylvania
Other name(s) CSXT Schuylkill River Bridge
Owner CSX Transportation
Characteristics
Design Through truss swing bridge
Piers in water 3
History
Fabrication by American Bridge Company
Opened 1910, rehabilitated May 2004

The B&O Railroad Bridge (also called CSXT's Schuylkill River Bridge) is a 1910 swing bridge across the Schuylkill River in the Grays Ferry neighborhood of Philadelphia, Pennsylvania. It carries CSX Philadelphia Subdivision rail lines over the river,[1] and sits upstream from the Passyunk Avenue Bridge and downstream from the Grays Ferry Bridge.

B&O Railroad Bridge looking northeast. Note the wooden fender for the near pier and the long wooden fender with yellow railings on top, which protects the swing bridge in the open position. (July 2010)

Construction and history

It is the second bridge to occupy this location. The Baltimore and Ohio Railroad built the original one in the 1880s, after losing a stock takeover battle for its main route into Philadelphia, the Philadelphia, Wilmington and Baltimore Railroad. The winner, the rival Pennsylvania Railroad, gave the B&O until 1884 to build its own southwest line into the city before cutting off access.[2]:154

The new route required a new bridge over the Schuylkill to replace the use of the PW&B's Gray's Ferry Bridge, and so the B&O built a four-span iron through truss bridge with a center swing span to allow boats to pass.[3][4] It opened on July 11, 1886.[5] (The cost of building the new route, especially the Howard Street Tunnel on the connecting Baltimore Belt Line, led to the B&O's first bankruptcy.)

In 1910, the B&O replaced the original bridge with the current one. The three-span through truss bridge with a center swing span was built by the American Bridge Company. During construction, a tugboat grounded on the nearby riverbank and was freed by a B&O locomotive.[6]

The bridge was struck by the tugboat Radnor, hauling a barge loaded with oleum, on March 12, 1924.

The bridge was originally protected by a mechanical interlocking, which was revised in 1914.[7] It was replaced in 1946 with an electrical interlocking, which also controlled the nearby junction with the Reading Company at Eastwick.[8]

Modern rehabilitation

B&O Railroad Bridge (July 2010 photo)

In 1977, the Chessie System, then-owner of the bridge, did engineering studies of the swing bridge mechanisms and determined that extensive rehabilitation was needed. Yet the project was placed on hold for decades, despite associated FRA violations and operational difficulties.

In late 2003, Chessie successor CSX Transportation finally undertook the renovation. The project included extensive work on the miter rails, the mechanisms that allow the rails to be connected and disconnected as the bridge is opened and closed. Because the bridge could not be opened during construction, close coordination was required between the contractors; CSX, which controlled rail traffic; and the U.S. Coast Guard, which controlled marine traffic.[1] The rehabilitation was completed on time in May 2004.[9]

See also

References

  1. 1 2 Judge, Tom (October 2004). "Shaping up bridge for second 100 years; CSXT's Schuylkill River bridge in Philadelphia carries heavy volumes of traffic, but needed rehab to do the job into a second century". Bnet: Reference Publications. Simmons-Boardman Publishing Corporation. Retrieved 2010-07-15. In 1910, the Baltimore & Ohio constructed a two-track swing bridge spanning the Schuylkill River in Philadelphia.
  2. Stover, John F. (1987). History of the Baltimore and Ohio Railroad. West Lafayette, Ind.: Purdue University Press. ISBN 0-911198-81-4.
  3. Harwood, Herbert H., Jr. (2002). Royal Blue Line: The Classic B&O Train between Washington and New York. Foreword by Courtney B. Wilson. Baltimore, Md.: Johns Hopkins University Press. p. 44. ISBN 978-0-8018-7061-3.
  4. Patton, William Macfarland (1893). A Practical Treatise on Foundations. New York: John Wiley & Sons. p. 130. OCLC 3490768.
  5. NRHS Bulletin. National Railway Historical Society. 38: 42. 1973. Missing or empty |title= (help)
  6. Eberwein, William F. (December 1910). "Engine Tows a Boat". Railway and Locomotive Engineering. 23: 492.
  7. "Summary of Signal Work in 1914". Railway Signaling and communications. 8: 22. January 1915.
  8. Railway Age. 121: 314. 1946. Missing or empty |title= (help)
  9. "RIDEX INSTALLATIONS, SCHUYLKILL RIVER SWING BRIDGE, PHILADELPHIA, PENNSYLVANIA". CMI-Promex, Inc., 7 Benjamin Green Road, Pedricktown, NJ 08067. 2004. Archived from the original on 2010-07-15. Retrieved 2010-07-15. Four photos of miter rails installed on the bridge
Wikimedia Commons has media related to Philadelphia B&O Railroad Bridge.
This article is issued from Wikipedia - version of the 10/23/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.