7"/44 caliber gun

7"/44 caliber Mark 1 and 7"/45 caliber Mark 2 Naval Gun

USS Minnesota (BB-22), cropped photo showing close up of port side 7"/45 caliber guns.
Type
Place of origin  United States
Service history
In service 1906
Used by  United States Navy
Wars
Production history
Designer Bureau of Ordnance
Designed 1900
Manufacturer Naval Gun Factory
Number built
  • Mark 1: 1
  • Mark 2: 111
Variants Mark 1 and Mark 2
Specifications
Weight
  • Mark 1: 29,621 lb (13,436 kg) (with breech)
  • Mark 2: 28,700 lb (13,000 kg)
Length
  • Mark 1: 316 in (8,000 mm)
  • Mark 2: 323 in (8,200 mm)
Barrel length
  • Mark 1: 308 in (7,800 mm) bore (44 calibers)
  • Mark 2: 315 in (8,000 mm) bore (45 calibers)

Shell
Caliber 7 in (178 mm)
Breech Mark 1: Welin breech block
Recoil
  • 19 in (480 mm) (nominal)
  • 21 in (530 mm) (maximum)
Elevation -7° to +15°
Traverse −150° to +150°
Rate of fire 4 rounds per minute
Muzzle velocity 2,700 ft/s (820 m/s)
Effective firing range 16,500 yd (15,100 m) at 15° elevation

The 7"/44 caliber gun Mark 1 (spoken "seven-inch-forty-four--caliber") and 7"/45 caliber gun Mark 2 (spoken "seven-inch-forty-five--caliber") were used for the secondary batteries of the United States Navy's last generation of pre-dreadnought battleships, the Connecticut-class and Mississippi-class. The 7-inch (178 mm) caliber was considered, at the time, to be the largest caliber weapon sutiable as a rapid-fire secondary gun because its shells were the heaviest that one man could handle alone.[1][2]

Design

The 7-inch Mark 1 was built in a length of 44 calibers, had a nickel-steel liner, with a tube, jacket and three hoops with a locking ring, all made of gun steel, a screw box liner, and Welin breech block. The Mark 1 was hooped from the breech to 47.5 in (1,210 mm) from the muzzle. Only one Mark 1 was built, the prototype. The Mark 2 was the production version, it was of the same construction as the Mark 1 except that it was hooped all the way to the muzzle and had one caliber, or seven inches, added to its length. The Mark 2 Mod 1 was constructed with a conical nickel-steel liner. Two experimental Mark 2 guns, given serial numbers 2 and 3, were built with wider diameter breech ends, with gun No. 2 modified with a conical nickel-steel liner and modified breech, becoming Mark 2 Mod 2.[1][2]

Most of the 7-inch guns were removed before World War I and some were mounted on Mark V tractor mounts that had been designed by the Bureau of Ordnance (BuOrd) and built in Philadelphia by the Baldwin Locomotive Works. The mounts were not self-propelled; the tracked mounting was for cross-country mobility, and they would be towed by a Holt tractor or other vehicle.[3] The Marines ordered 20 of these guns, with the Army later ordering 36; before the Armistice was signed all 20 were delivered to the Marines, while 18 were completed postwar for the Army.[1][2][3]

The Army had requested these guns because of their lack of heavy artillery in France. The 20 guns for the Marines were to go to the new 10th Marine Artillery Regiment that was training at Quantico, Virginia in the fall of 1918. The Marines fired the first shot at Lower Station, Naval Support Facility Dahlgren today, 24,000 yd (22,000 m) down the Potomac River on 16 October 1918. In common with most US-produced heavy artillery in that war, none of the 7-inch guns were shipped to France or saw action.[3] In 1920 the BuOrd described the weapon as,

the heaviest and hardest hitting gun for which a mobile field mount of this kind had ever been requested by any nation or army.

The gun and towed tractor mount are an ancestor of the self-propelled artillery that has played a major role in most wars since.[4]

Also in World War I, twelve 7-inch guns were mounted as railway artillery for the Army.[5][6] None were shipped overseas in that war. These appear to have been dismounted and used as coast artillery after the war.[3] However, at least one was transferred to Brazil as a railway gun in 1941.

Due to the emergency situation at the beginning of World War II several of these guns were pressed into service as coastal defense batteries.[1]

Naval service

Ship Gun Installed Gun Mount
USS Connecticut (BB-18) Mark 2: 7"/45 caliber Mark 1 and Mark 2: 12 × single pedestal for casemates
USS Louisiana (BB-19) Mark 2: 7"/45 caliber Mark 1 and Mark 2: 12 × single pedestal for casemates
USS Vermont (BB-20) Mark 2: 7"/45 caliber Mark 1 and Mark 2: 12 × single pedestal for casemates
USS Kansas (BB-21) Mark 2: 7"/45 caliber Mark 1 and Mark 2: 12 × single pedestal for casemates
USS Minnesota (BB-22) Mark 2: 7"/45 caliber Mark 1 and Mark 2: 12 × single pedestal for casemates
USS New Hampshire (BB-25) Mark 2: 7"/45 caliber Mark 1 and Mark 2: 12 × single pedestal for casemates
USS Mississippi (BB-23) Mark 2: 7"/45 caliber Mark 1 and Mark 2: 8 × single pedestal for casemates
USS Idaho (BB-24) Mark 2: 7"/45 caliber Mark 1 and Mark 2: 8 × single pedestal for casemates

Coast defense locations

7-inch guns were emplaced during World War II at numerous locations, operated by the United States Army Coast Artillery Corps. This list is not exhaustive. They were grouped into two-gun batteries unless otherwise noted.[7]

Survivors

At least twelve guns are preserved, ten of them Mark 2 guns used for coast defense in World War II.

Front close up of Battery Randolph in Fort DeRussy in Honolulu, Hawai'i.
Transportation personnel at Naval Support Facility Dahlgren prepare to off-load a World War I-era 7-inch gun on a tracked mount, the first gun originally test-fired to mark the establishment of Dahlgren as a naval proving ground on Oct. 16, 1918. The 7-inch, 45 caliber gun will be restored by the Naval Surface Warfare Center Dahlgren Division.
A 7-inch railway gun preserved at the Museu Militar Conde de Linhares in Rio de Janeiro, Brazil. Transferred to Brazil in 1941.

Notes

References

Books
Online sources

External links

Wikimedia Commons has media related to US 7 inch tractor mounted gun.
This article is issued from Wikipedia - version of the 11/20/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.